首页 | 本学科首页   官方微博 | 高级检索  
     检索      

水性聚氨酯胶粘剂的合成工艺研究
引用本文:刘兴重,王敏娟,周林涛,刘小贝.水性聚氨酯胶粘剂的合成工艺研究[J].江汉大学学报(自然科学版),2008,36(1):31-35.
作者姓名:刘兴重  王敏娟  周林涛  刘小贝
作者单位:1. 武汉科技大学,化学工程与技术学院,武汉,430081
2. 江汉大学,化学与环境工程学院,武汉,430056
基金项目:湖北省教育厅资助项目(2003BC1)
摘    要:采用甲苯二异氰酸酯(TDI)、聚酯多元醇和二羟甲基丙酸(DMPA)为主要原料,经分步预聚后在水中自乳化合成了阴离子型水性聚氨酯.探讨了合成工艺路线,研究了NCO/OH比例、DMPA含量等对水性聚氨酯乳液性能的影响.结果表明:当NCO/OH值选择在1.5~2.3,DMPA用量为3%~8%时,乳液性能最佳.

关 键 词:水性聚氨酯  胶粘剂  合成  乳化
文章编号:1673-0143(2008)01-0031-05
修稿时间:2007年9月18日

Study on Synthesis of Waterborne Polyurethane
LIU Xing-zhong,WANG Min-juan,ZHOU Lin-tao,et al..Study on Synthesis of Waterborne Polyurethane[J].Journal of Jianghan University:Natural Sciences,2008,36(1):31-35.
Authors:LIU Xing-zhong  WANG Min-juan  ZHOU Lin-tao  
Institution:LIU Xing-zhong1,WANG Min-juan2,ZHOU Lin-tao1,et al.
Abstract:The anionic waterborne polyurethane was synthesized by the reaction of toluene di-isocyanate(TDI) with polyester glycol and dimethlolpropionic acid(DMPA) with the process ofprepolymerization step by step and self-emulsification.Studied the factors which influence the re-action.The results show that the performances of emulsion is optimum when NCO/OH ratio is 1.5~2.3 and the amount of DMPA is 3%~8%.
Keywords:waterborne polyurethane  adhesive  synthesis  emulsification
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号