首页 | 本学科首页   官方微博 | 高级检索  
     检索      

固溶后降温预析出对7A55铝合金力学及腐蚀性能的影响
引用本文:张新明,张小艳,刘胜胆,刘瑛.固溶后降温预析出对7A55铝合金力学及腐蚀性能的影响[J].中南大学学报(自然科学版),2007,38(5):789-794.
作者姓名:张新明  张小艳  刘胜胆  刘瑛
作者单位:中南大学材料科学与工程学院 湖南长沙410083
基金项目:国家重点基础研究发展计划(973计划)
摘    要:采用硬度测试、电导率测试及透射电镜研究固溶后降温预析出处理对7A55铝合金板材力学和腐蚀性能的影响。研究结果表明:随着预析出处理温度降低,基体析出相粗化且密度变小,导致合金时效后硬度和强度降低;晶界析出的平衡相由连续链状分布逐渐变为不连续分布,连续网状的腐蚀通道转变为断续的腐蚀点,7A55铝合金抗晶间腐蚀和剥落腐蚀性能提高。

关 键 词:7A55铝合金  预析出  晶间腐蚀  剥落腐蚀
文章编号:1672-7207(2007)05-0789-06
修稿时间:2006-12-11

Effect of pre-precipitation after solution on mechanical properties and corrosion resistance of aluminum alloy 7A55
ZHANG Xin-ming,ZHANG Xiao-yan,LIU Sheng-dan,LIU Ying.Effect of pre-precipitation after solution on mechanical properties and corrosion resistance of aluminum alloy 7A55[J].Journal of Central South University:Science and Technology,2007,38(5):789-794.
Authors:ZHANG Xin-ming  ZHANG Xiao-yan  LIU Sheng-dan  LIU Ying
Institution:School of Materials Science and Engineering, Central South University, Changsha 410083, China
Abstract:The influence of pre-precipitation after solution on mechanical properties and corrosion resistance of aluminium alloy 7A55 was investigated by means of hardness tests,conductivity tests and transmission electron microscopy(TEM).The results show that with the decrease of pre-precipitation temperature,the age-hardening precipitates in the matrix become less dispersed and coarsened,which decreases the hardness and strength.Meanwhile grain boundary precipitates are discontinuously distributed and more-spaced through pre-precipitation,the resistance to intergranular corrosion and exfoliation corrosion of aluminium alloy 7A55 are improved.
Keywords:7A55 aluminium alloy  pre-precipitation  intergranular corrosion  exfoliation corrosion
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号