MIL-101(Fe)对草甘膦的吸附行为研究

采用溶剂热法制备MIL-101(Fe)用作吸附材料,借助XRD、SEM、XPS及氮气吸脱附测试对所制材料的形貌及结构进行表征,研究了溶液pH值、反应时间、溶液浓度以及温度对其吸附草甘膦行为的影响。结果表明,当pH为3时,MIL-101(Fe)对草甘膦的吸附效果最佳,且随着温度的升高,MIL-101(Fe)对草甘膦的吸附速率明显增加,吸附过程符合拟二级动力学,等温吸附实验数据符合Langmuir和Temkin模型。MIL-101(Fe)吸附草甘膦属自发吸热的化学吸附反应,MIL-101(Fe)的中心金属Fe与草甘膦中O的配位在吸附过程中起主要作用。     

微波辐射β分子筛负载SO_4~(2-)/Fe_2O_3固体超强酸催化制备2-(2-1H-苯并咪唑基)-苯酚

以邻苯二胺和水杨酸为原料,β分子筛负载SO2-4/Fe2O3固体超强酸催化剂,微波辐射促进合成了2-(2-1H-苯并咪唑基)-苯酚。实验结果表明:n(水杨酸)∶n(邻苯二胺)=1.0∶1.1(水杨酸6.90 g,邻苯二胺5.70 g),固体超强酸相对用量0.10 g,微波辐射功率500 W,微波辐射时间5 min。产率达87.8%,与常规加热方法相比,具有反应速度快、转化率高等优点。     

不同铸造方法对船用螺旋桨毂成型质量的影响

采用ZCuAl9Fe4Ni4Mn2铝青铜合金为结构材料,研究3种不同铸造方法对船用桨毂组织性能的影响。结果表明,重力铸造桨毂窗口下方有大量氧化夹渣存在;低压铸造容易获得组织致密、性能优良的桨毂,但工序较多;离心铸造可获得较为致密的桨毂断面组织,二次氧化夹渣状况较重力铸造得到明显改善,但离心转速超过150r/min时,容易产生缩孔和缩松。     

沉积物对测定地表水重金属中铁和锰的影响

黄河水在太原境内含沙量比较大,所携带的泥沙对实际测定重金属有一定的影响。通过对地表水水样前处理影响因素的交叉试验,研究了沉积物对测定地表水重金属铁、锰的影响,得到了一些有参考意义的结论。基于实验结果,指出直接测定含沉积物水样中的铁、锰要比过滤掉沉积物后的水样结果偏高很多,并且验证了重金属在沉积物中的吸附-解吸对pH值具有依赖性。     

Degradation of 2,4-dichlorophenol catalyzed by the immobilized laccase with the carrier of FeaO4@MSS-NH2

With the Fe304@MSS （magnetic mesoporous silica spheres）-NH2 as the carrier and the glutaraldehyde as crosslinking agent, the immobilized laccase has been pre- pared and characterized by XRD, IR, SEM and BET etc. Under the optimal conditions, the removal efficiency of 2,4-DCP reached 88 % and the removal efficiency still remained 61.5 % after five cycles of operations. In virtue of GC-MS analysis, 2,5-dimethoxyl-l,4-quinone, 2-chlo- rine-l,4-dimethoxyl benzene, 3,3＇-dichlorine-4,4＇-dimeth- oxyl biphenyl, maleic acid phenol ester, and three kinds of maleic acid, alcohol ester, and para-hydroxyl phenol ester compounds have been identified as intermediate and final degradation products of 2,4-DCP, respectively. Besides, the degradation products of 2,4-DCP have been confirmed by performing the 1H-NMR and 13C-NMR experiments, further demonstrating the degradation mechanism of 2,4- DCP by the immobilized laccase.     

Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.     

高选择性新型喹啉衍生物Fe~(3+)荧光探针的合成及光学性质研究

设计、合成了一种利用"Click Chemistry"构建的基于含喹啉染料的过渡金属离子荧光探针HQT.探针分子HQT在乙腈-水溶液中对Fe3+有很好的选择性识别且最大发射波长由405nm左右红移至500nm.而其它过渡金属离子的存在对Fe3+的检测不造成干扰且工作的p H(3-11)范围广,该化合物是一种高选择性的Fe3+荧光探针.     

复合物的 制备及苋菜红降解性能的研究

本文利用超声分散和溶液沸腾法制备TiO2,CeO2/TiO2和Fe2O3/TiO2复合物,在可见光的照射下,考察了苋菜红降解的效果,并利用X-射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对合成的光催化剂进行了表征. 另外,研究了TiO2,CeO2/TiO2和Fe2O3/TiO2复合物的用量、可见光照射时间、处理温度和处理时间等因素对苋菜红降解率的影响.结果表明,CeO2/TiO2复合物对降解染料表现出了更好的光催化活性.     

“Fe（OH）3溶胶的制备及电泳”实验的探讨

探讨溶胶浓度、溶胶电导率、非电解质脲素加入量对Fe(OH)3溶胶ζ电位的影响,为"Fe(OH)3溶胶制备及电泳"实验提供参考。     

偏心铁纳米环的磁化动力学研究

利用Monte Carlo(蒙特卡洛)方法结合快速傅里叶变换,模拟不同形状的偏心铁纳米环的磁特性.研究结果表明:偏心铁纳米环的磁滞回线与对称系统的磁滞回线类似,均具有双稳态,即存在明显的"vortex"态(涡旋态)与"onion"态(洋葱态).模拟结果还表明,相较于对称纳米环,偏心铁纳米环系统具有更为复杂的过渡状态.这说明形状和结构的不对称性对铁磁纳米环的磁化行为有一定的影响.这一结果对实验研究及磁性纳米环的实际应用具有很好的指导和参考意义.