客车侧围蒙皮生产工艺现状及未来发展趋势

本文主要介绍了客车侧围蒙皮生产工艺的现状,阐述了影响车身外观质量的诸多工艺选择,并简略描述了客车侧围蒙皮的未来发展趋势.     

一种热处理强化铝合金脉冲MIG焊工艺研究

通过对A6N01S-T5铝合金型材采用脉冲MIG焊的焊接方法进行焊接试验,结合自动焊设备特点制定了合理的焊接工艺,同时对焊缝质量进行检验,对焊接接头金相组织及力学性能进行分析,在焊接接头中未发现焊接缺陷,焊缝质量良好,满足ISO 10042B级焊缝质量要求。采用脉冲MIG焊热处理强化铝合金,可获得综合性能优良的焊接接头。     

不同壁材辣素微胶囊的化学法制备与性质研究Ⅰ:表面结构分析

在乳液体系中,选择蜜胺甲醛、尿醛、聚脲、聚氨基甲酸酯四种壁材,以原位聚合法和界面聚合法制备了辣素同系物--N-香草基壬酰胺微胶囊.电镜与红外光谱显示了微胶囊的形成.以X射线衍射、光电子能谱和比表面分析探索了徽胶囊的表面性质,根据微胶囊的外观和囊壁结晶状态,囊壁可分为有规则结晶状态的无孔膜和无明显结晶峰的有孔膜两类,其表面碳原子的化学位移类似碳单质sp3杂化态的构型,是导致各类壁材出现不同程度结晶区的重要原因.微胶囊颗粒间无明显孔分布、符合紧密堆积方式和Langumire解析式.     

制备微胶囊时界面张力的影响

主要探讨在制备微胶囊时囊心、壁材、介质、界面张力大小及固体界面吸附关系 ,对囊心包覆效果的影响 .     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

立井强化冻结施工理论分析

本文以谢桥主井为例,从冻结壁强度、变形、工作面底鼓和超前位移及冻胀压力等几方面.分析了深厚表土立井强化冻结施工对防止冻结管断裂和外层井壁破坏的机理.给出了强化冻结施工适用条件.并提出了按井帮温度进行强化冻结设计的方法.     

热喷焊技术应用及质量控制

针对热喷焊技术的应用，喷焊过程中出现的质量缺陷、产生的原因及质量控制的方法进行了阐述。     

桥梁栏杆的美学设计

本文主要阐述了桥梁栏杆的美学设计 ,从栏杆形式的多样性、与周围环境的协调性、民族文化特色以及它的环保性多方面介绍了栏杆美学设计的复杂和必要。