Hydrostatic settling velocity of sediments

The settling of sediments is an accelerative process in which the concentration of the main sediments zone will heavily influence settling velocity, but the explicit relationship between the concentration and settling velocity has not been reported in literature. Here a theoretical function was built for the time dependent concentration and time dependent settling velocity of sediments ; then the entire settling process reflecting concentration was shown on the basis of sediments instant-settlement theory and mathematical method. Agreement of computed results and experimental data was found. Several governing parameters, including particle size,particle density,inltial suspended sediments concentration and suspension height, were discussed with a series of calculated velocity curves. The research indicated that (1) the presented concentration-velocity time relationship is rational, (2) settling process of the sediments group with variation of concentration consists of acceleration stage, uniform motion stage and deceleration stage, and (3) particle size, particle density and initial suspended sediments concentration have more influence on the settling velocity than the suspension height and water temperature.     

Mechanical Properties of Laterally Driven Microresonance with a One-Side Straight-Leg Suspension

The mechanical properties of lateral polysilicon comb-driven microresonators suspended from one-side straight-leg beams, which are widely used in linear microvibromotors, are investigated in this paper.The lateral vibration of the microresonator was modeled assuming that the symmetry of the microstructures and the applied loads are different. Methods were given to calculate the stress, lateral displacement, spring coefficient, and resonant frequency. The results show that the simple mechanical model is a superfluous system with three unknown variables. The results differ from pervious results for a microresonator suspended from double-side straight-leg beams, which has been commonly used to design linear microvibromotors.     

氯仿在悬浮TiO2体系中的降解

分别用光还原沉积法制备的掺铂TiO2纤维和商用TiO2作为催化荆，对氯仿进行光催化降解。通过测定Cl^-浓度发现不同通O2方式对氯仿的光降解有很大影响，O2的存在，促进了氯仿的降解；并进一步对溶液中的溶氧量(DD)测定，发现DO值呈线性下降且氯仿降解过程中有氧降解和无氧降解2种机理是共存的；同时发现上述2种催化剂的反应现象大相径庭，并结合了有机质液相吸附理论对其反应现象进行分析，发现纤维状微观结构是其高光催化性能的直接原因。     

植物激素影响扁藻生长的生理效应

用三类四种植物激素影响扁藻生长和某些代谢过程的试验结果表明:NAA、2.4-D 和 GA_3不论是单独使用,或是它们之间的组合,对扁藻的生长,光合和呼吸强度,对氮素的吸收均有促进作用。单独使用时,NAA、2.4-D在0.5mg/L;GA_3在0.1mg/L 的效果最好。然而,6-BA效果较差。激素之间的组合,除6-BA 与 GA_3的组合具有抑制作用外,其余的组合均有增效作用。植物激素能促进扁藻的生长,与提高藻类的代谢水平有关,代谢水平的提高,便为藻类的生长提供了必要的物质和能量基础。     

炫酷科技

1 蜘蛛侠手套；2 可大可小的如意纸椅；3 磁力悬浮床；4 无线光鼠“空中”耍；5 拥抱衫；6 能感觉到人走近的广告牌；7 会潜水的飞机。[编者按]     

水稻花粉悬浮培养及其在育种上的应用

评估了２０个水稻品种离体花粉悬浮培养产生愈伤组织和再分化植株的能力，并进行了花粉悬浮培养试验，结果表明；品种之间反应差异很大。来源于日本的“黎明”（粳稻）最敏感。“黎明”植株再分化的频率达８４．１％。在愈伤组织的形成和植株再分化过程中，除其它一些因子外，基因型的差异有一定制约作用。通过水稻花粉悬浮培养诱导出的新品系“Ｎ１０”，其特征有：早熟，穗大，株高（９０～１００ｃｍ），产量高和抗稻瘟病等。     

水旋澄清池中悬浮层的特性

在水旋澄清池中，稳定的悬浮层中一些比较突出的特点以及在水工业中这些特点在生产中的应用。     

化学一级强化+悬浮填料活性污泥处理污水

针对浙江无锡市惠山区新建的惠山污水处理厂设计工艺,采用化学一级强化处理工艺及悬浮填料活性污泥法,并且就这两种工艺结合组成的二级强化处理工艺在工程实践中的应用作了技术可靠性和经济合理性分析.得出化学一级强化及悬浮填料活性污泥法的处理工艺具有工程投资省、适应水质变化操作灵活等优点.但由于没有太多运行经验,所以需要一个逐步摸索的过程.     

基于强化学习的电磁悬浮型磁浮列车悬浮控制

为了保证磁浮列车的安全、可靠运行,研究了悬浮系统在参数摄动条件下的悬浮控制问题。首先,对电磁悬浮（EMS）型磁浮列车的基本悬浮单元建模,给出了电流控制模型;然后,建立了悬浮系统的强化学习环境以及软演员-评论家（SAC）智能体,并设计了加速训练的奖励函数与“吸死”处理方案;最后,提出了基于强化学习的悬浮控制方法。与传统比例-积分-微分（PID）控制方法的对比结果表明,本方法具有更快的动态响应,在损失50%线圈匝数或磁极面积变化时具有更好的跟踪精度。     

悬浮预热器中的换热分析

本文通过分析悬浮预热器的传热机理,讨论了颗粒的加速过程和换热时间对分散和换热的影响,论述了分散不良引起的“准短路”对分散、换热及能量损失的影响,并指出可以通过温熵图计算不可逆损失。