“二三结合”开发模式渗流特征研究

L油田B区块开展"二三结合"实验区,"二三结合"开发模式渗流特征对区块的合理高效开发具有重要意义。为了明确其渗流特征,利用油藏数值模拟软件Eclipse建立代表意义的油藏数值模型,研究区块"二三结合"开发模式下原射孔层和补孔层的渗流特征,分析了"二三结合"开发模式下,不同开发阶段综合含水率、采出程度、井底压力、地层压力及含水饱和度的变化特征。研究表明,"二三结合"开发模式先通过水驱开发挖潜原射孔层剩余油,提高厚油层顶部剩余油的采出程度,再通过聚合物驱进一步提高开发效果,通过水驱与聚驱的综合作用,最终得到较好的开发效果。     

基于BaLuF5∶Yb3+,E3+纳米晶掺杂的聚合物光波导放大器

为提高聚合物光波导放大器的增益性能,利用高温法合成了BaLuF5∶Yb3+,Er3+纳米晶,并分别对纳米晶的形貌、晶体结构和近红外发射特性进行了表征.测试结果表明,纳米晶平均粒径为13 nm,并在1 530 nm处具有较强的发射,荧光半高宽为50 nm.将合成的纳米晶掺杂入SU-8聚合物作为光波导放大器的芯层材料,使用光刻显影等工艺,在表面长有二氧化硅的硅衬底上制备出了聚合物光波导放大器.当980 nm波长泵浦光功率为280 mW、信号光波长为1 530 nm且功率为0.1 mW时,在长度为1.1 cm的光波导放大器中,获得了3.95 dB的相对增益.     

阳离子微粒聚合物在造纸工业中的应用

采用乳剂和溶液的聚合技术制备了不同电荷密度和胶体性质的阳离子微粒聚合物(CPMP)。论文探讨了阳离子微粒聚合物在造纸工业中的应用。研究表明用阳离子或阴离子的聚合物与阳离子微粒聚合物联合使用可以改善纸张的匀度和留着率。其机理可能是由干阳离子微粒聚合物的加入产生了更有效的架桥絮聚。另外阳离子微粒聚合物也是一种良好的施胶剂，研究结果表明施胶效果与聚合物添加量．电荷密度和微粒尺寸有关。通过施胶张可以获得更好的光学和物理性能。     

含苯甲醚基团的高分子液晶的合成及表征

本文讨论了侧链含有亚甲氧基连接基高分子液晶的合成及表征．用酚类与苯甲基氯制备了六种单体，用硅氢加成法合成了高分子液晶．六种单体为：4-(4—烯丙氧基苯甲氧基)联苯(M1)，4’—甲氧苯基4—烯丙氧基苯甲醚(M2)，4’—甲苯基—4—烯丙氧基苯甲醚(M3)，苯基4—烯丙氧基苯甲醚(M4)，4—(4-烯丙氧基苯甲氧基)4’—甲氧基联苯(M5)，4—(4—甲氧基苯甲氧基)-4’—烯丙氧基联苯(M6)．用偏光显微镜和DSC测定了单体和高分子液晶的相转变温度和介晶范围，单体M5和M6显示较好的液晶性，聚合物PM1、PM5、PM6、P(M2—M5)和P(M2—M6)显示出较好的液晶性，共聚物液晶比其它高分子液晶的介晶范围宽．     

乙酰胆碱对人胃粘膜上皮细胞和胃腺癌细胞内Ca2+、Mg2+浓度的影响

目的:探讨乙酰胆碱对人胃粘膜上皮细胞和胃腺癌细胞内Ca2 、Mg2 浓度的影响。方法:利用大型生化分析仪,检测了乙酰胆碱作用后培养的人胃粘膜上皮细胞和胃腺癌细胞内Ca2 、Mg2 的浓度。结果:与正常胃粘膜上皮细胞比较,胃腺癌细胞内Ca2 、Mg2 浓度偏低(P>0 01)。在乙酰胆碱作用下,胃粘膜上皮细胞内Ca2 浓度升高(P<0 01),Mg2 浓度降低(P<0 01);胃腺癌细胞仅有Ca2 浓度升高(P<0 05),Mg2 浓度无变化。阿托品能阻断乙酰胆碱的作用(P<0 05)。结论:乙酰胆碱对胃粘膜上皮细胞和胃腺癌细胞的作用是通过毒蕈碱受体实现的。     

太阳能空调的可行性研究

对太阳能空调系统进行了定性分析 ,从环保、节能角度阐述了发展太阳能空调的优势所在。提出了太阳能空调将具有广阔的市场前景。     

光电转换体系太阳能聚集器

In standard P-V systems, the high cost and low quantum efficiency of silicon cells has held back widespread adoption of this technology for decades. To generate electrical power from solar energy in a cost effective way, most methods require the concentration of the sunlight in order to increase the efficiency of energy conversion. Most systems use parabolic mirrors to focus sunlight to either a line （trough systems） or a small volume （dishes）. One of the reasons solar power still remains little utilised, is the high cost of the collection systems. Light focussing devices using reflection usually take the form of a curved rein＇or. In contrast, this paper describes the new design of a device consisting of an array of small angled reflecting m/trot facets located in a planar form. The three dimensional angle of each facet in the array is a function of its position in the array, and is calculated to be such that for a parallel beam striking the array, each facet will reflect the light in such a way as to form a focal point region.     

The Gas Sensitivity of Polypyrrole Film Fabricated by in Situ Polymerization

1 Results Polypyrrole (PPy) is a typical conducting polymer with high conductivity and good stability,and has been widely used for detection of gases including ammonia and nitroxide[1].However the reversiblity and selectivity of the response to these gases are always not satisfying.In the paper,conductive PPy film was deposited on the interdigital electrode modified by one bilayer of poly(diallyldimethylammonium chloride) and poly(sodium styrenesulfonate),by in-situ polymerization with FeCl3 as oxidizin...     

改善a-Si太阳电池界面特性的新方法

本文介绍一种用非晶金属硅化物改善a—Sipin太阳电池TCO/p界面特性的新方法.文章中详细讨论了载流子的传输模型并给出了一系列的实验数据.利用这种方法,用单反应室等离子体CVD装置使a—Si电池的短路电流提高了10%以上,并已获得10.6%的转换效率.     

Influence of Microstructure and Sintering Routes on Transport Properties of Apatite Materials for Fuel Cells

1 Results Oxy-apatite materials are thought as zirconia-substitutes in Solid Oxide Fuel Cells due to their fast ionic conduction. However, the well known difficulties related to their densification prevent them from being used as such. This study presents strategies to obtain oxy-apatite dense materials and the influence of elaboration route on transport properties. Particular emphasis is put on the microstructure effect on ion conduction. By the combined use of freeze-drying and conventional or spark p...