Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

多波长数据线性回归光度法同时测定钙和镁

本文研究了酸性铬蓝K体系用于同时测定钙和慎的显色条件，借助多波长线性回归法处理数据，提出光度测定钙和镁的简便方法，免去了分离手续。应用于三个水样中钙、镁含量的测定，结果满意。     

双层钙钛矿Sr2FeMoO6，Ba2FeMoO6的电磁性质研究

分析了双层钙钛矿结构的锰氧化合物Sr2FeMoO6,Ba2FeMoO6物相结构和电磁学性质,对巨磁阻效应进行了探讨,揭示了Sr2FeMoO6样品为半导体导电性,Ba2FeMoO6样品为金属导电性.     

椭圆偏振法研究四方氧化锆对Zr-Sn-Nb合金氧化膜耐腐蚀性能的影响

将经过不同热处理的Zr-Sn-Nb合金样品放在350℃、16．8mol／LPa、0．01mol／LLiOH溶液的高压釜中进行腐蚀。用椭圆偏振法研究氧化膜中的四方氧化锆，发现经过580℃／冷轧／500℃处理的样品在腐蚀42天和190天后氧化膜中的四方氧化锆比其它样品的多。四方氧化锆是影响合金耐腐蚀性能的一个主要因素，四方氧化锆的形成有利于提高合金的耐腐蚀性能。     

碳化钨负载的S2O8^2—／ZrO2催化剂的表征与催化活性研究

研究了负载碳化钨对S2O8^2-／ZrO2(PSZ)固体超强酸催化剂(WC／PSZ)上正戊烷异构化反应性能的影响，并用BET、XRD和XPS等手段对催化剂进行了表征．结果表明，PSZ在负载适量碳化钨后对正戊烷反应的活性和选择性显著提高，显示出优于Pt／PSZ等催化剂的效果，并且负载高比表面积的WC具有更高的催化活性．WC在高温焙烧后绝大部分被氧化为WO3，经H2活化后又被还原为W25O73为主的氧化钨，并且可能会形成一种氧化碳化物(WCxOy)产物．     

双金属氧化物和氧化物载体组分间的相互作用

讨论了一些过渡金属氧化物（NiO,CuO或MoO3)在经改性所得复合载体（TiO2-γ-Al2O3，MoO3-t-ZrO2或NiO-t-ZrO2)上的分散作用，这些三地体系中实验测定的氧化物分散容量与研究负载型二元氧化物体系所得嵌入模型的估算值基本相符；样品的表面组成、结构和性能与载体的表面结构、过渡金属氧化物的负载量和加料顺序以及焙烧温度密切相关。     

负载型金属氧化物常温精脱硫剂的制备与表征

以γ—Al2O3为载体，用浸渍沉淀法制备复合金属氧化物脱硫剂，添加竞争吸附剂得到高分散、均匀型金属氧化物精脱硫剂。常温、缺氧条件下精脱H2S穿透硫容可达16．8％．采用EP、TEM技术分析了金属氧化物活性组分的均匀分布及脱硫前后的脱硫剂微表面的变化。     

Nitric oxide suppresses stomatal opening by inhibiting inward-rectifying K_(in)~ channels in Arabidopsis guard cells

We explore nitric oxide (NO) effect on K in channels in Arabidopsis guard cells. We observed NO inhib- ited K in currents when Ca2 chelator EGTA (Ethylene glycol-bis(2-aminoethylether)-N,N,N′,N′-tetraacetic acid) was not added in the pipette solution; K in currents were not sensitive to NO when cytosolic Ca2 was chelated by EGTA. NO inhibited the Arabidopsis stomatal opening, but when EGTA was added in the bath solution, inhibition effect of NO on stomatal opening vanished. Thus, it implies that NO ele- vates cytosolic Ca2 by activating plasma membrane Ca2 channels firstly, then inactivates K in chan- nels, resulting in stomatal opening suppressed subsequently.     

基于ZnO纳米结构的H_2、NH_3气体敏感性研究

通过简单的水热法在金电极上制备了氧化锌纳米棒,从而制成了气体传感器.研究了氧化锌纳米棒的结构和特性,发现用该材料制成的气体传感器对于500 ppm的NH3和H2在150 ℃下有较灵敏的反应,并探讨了产生传感效应的机理.该传感器制备方法简单、廉价、环保,适合大批量生产,有望应用于工业生产和日常生活的气体探测.