A TEM study on the microstructure of spark plasma sintered ZrB_2-based composite with nano-sized SiC dopant

Sintering behavior of ZrB_2 ceramic with nano-sized SiC dopant was studied. ZrB_2-25 vol% nano-sized SiC was selected as the starting mixture to fabricate the composite. The manufacturing process was accomplished at 1800℃ for 5 min under 25 MPa via spark plasma sintering(SPS). The as-sintered sample reached a relative density of 99%. Besides the initial phases, namely ZrB_2 and SiC, the high-resolution X-ray diffraction(HRXRD) was used to study the formation of an in-situ ZrC phase. The possible chemical interactions during the ZrC phase formation were scrutinized. The microstructure of the composite was studied by the field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). Elemental analysis through FESEM evaluations revealed the formation of amorphous phases, rich in Zr, C, Si, B, and O elements, which was in harmony with the thermodynamical assessments. TEM studies endorsed the formation of such phases, containing a glassy bed of Si–B–O with ZrC and C islands dispersed therein.     

Intrinsically disordered proteins in crowded milieu: when chaos prevails within the cellular gumbo

Effects of macromolecular crowding on structural and functional properties of ordered proteins, their folding, interactability, and aggregation are well documented. Much less is known about how macromolecular crowding might affect structural and functional behaviour of intrinsically disordered proteins (IDPs) or intrinsically disordered protein regions (IDPRs). To fill this gap, this review represents a systematic analysis of the available literature data on the behaviour of IDPs/IDPRs in crowded environment. Although it was hypothesized that, due to the excluded-volume effects present in crowded environments, IDPs/IDPRs would invariantly fold in the presence of high concentrations of crowding agents or in the crowded cellular environment, accumulated data indicate that, based on their response to the presence of crowders, IDPs/IDPRs can be grouped into three major categories, foldable, non-foldable, and unfoldable. This is because natural cellular environment is not simply characterized by the presence of high concentration of “inert” macromolecules, but represents an active milieu, components of which are engaged in direct physical interactions and soft interactions with target proteins. Some of these interactions with cellular components can cause (local) unfolding of query proteins. In other words, since crowding can cause both folding and unfolding of an IDP or its regions, the outputs of the placing of a query protein to the crowded environment would depend on the balance between these two processes. As a result, and because of the spatio-temporal heterogeneity in structural organization of IDPs, macromolecular crowding can differently affect structures of different IDPs. Recent studies indicate that some IDPs are able to undergo liquid–liquid-phase transitions leading to the formation of various proteinaceous membrane-less organelles (PMLOs). Although interiors of such PMLOs are self-crowded, being characterized by locally increased concentrations of phase-separating IDPs, these IDPs are minimally foldable or even non-foldable at all (at least within the physiologically safe time-frame of normal PMLO existence).     

Effect of MWCNT reinforcement on the precipitation-hardening behavior of AA2219

Aluminum alloy matrix composites have found a predominant place in research, and their applications are explored in almost all industries. The aerospace industry has been using precipitation-hardenable alloys in structural applications. However, insufficient literature is available on the influence of multiwalled carbon nanotubes (MWCNTs) on precipitation-hardenable alloy composite materials; thus, this work was designed to elucidate the effect on MWCNT reinforcement on AA2219 with and without precipitation hardening. Reinforcement with MWCNTs has been reported to accelerate precipitation and to achieve greater hardness within a much shorter time. The addition of 0.75wt% MWCNTs resulted in maximal hardness at 90 min, which is approximately 27% of improvement over the maximum hardness achieved by the corresponding monolithic alloy after 10 h of aging. The sample reinforced with 0.75wt% MWCNTs showed an improvement of 82% in hardness by solutionizing and aging compared to that achieved by sintering.     

水合物地层低温钻井液对井底岩石表层强度影响

由于天然气水合物仅在高压低温条件下稳定存在,为了保持水合物稳定,在钻井过程中宜采用低温钻井液,而在低温条件下钻井液能否对井底岩石表层起到软化作用,对于提高机械钻速具有重要意义。在分析钻井液对井底岩石表层软化作用机制的基础上,较系统地建立低温钻井液软化井底岩石表层定量评价方法,以清水为对比浆液,通过试验将6种水合物地层模拟钻井液(分别含有质量分数为0.1%的表面活性剂和有机盐处理剂)在低温条件下对薄片砂岩试样的软化效果进行对比。结果表明:相比于两种有机盐处理剂,含表面活性剂的4种模拟钻井液在低温条件下对岩样软化效果更好,有利于提高岩石破碎效率和机械钻速;4种含表面活性剂钻井液中,含十二烷基硫酸钠(SDS)钻井液对岩样的软化效果最好。     

Laccases of prokaryotic origin: enzymes at the interface of protein science and protein technology

The ubiquitous members of the multicopper oxidase family of enzymes oxidize a range of aromatic substrates such as polyphenols, methoxy-substituted phenols, amines and inorganic compounds, concomitantly with the reduction of molecular dioxygen to water. This family of enzymes can be broadly divided into two functional classes: metalloxidases and laccases. Several prokaryotic metalloxidases have been described in the last decade showing a robust activity towards metals, such as Cu(I), Fe(II) or Mn(II) and have been implicated in the metal metabolism of the corresponding microorganisms. Many laccases, with a superior efficiency for oxidation of organic compounds when compared with metals, have also been identified and characterized from prokaryotes, playing roles that more closely conform to those of intermediary metabolism. This review aims to present an update of current knowledge on prokaryotic multicopper oxidases, with a special emphasis on laccases, anticipating their enormous potential for industrial and environmental applications.     

Multiple paths to aquatic specialisation in four species of Central American Anolis lizards

Aquatic anoles present an interesting ecomorphological puzzle. On the one hand, the link between habitat use and morphology is well established as convergent within the Caribbean anole radiation. On the other hand, aquatic anoles do not appear to form an ecomorphological group – rather, it appears that there may be several ways to adapt to aquatic habitats. We explore this issue by examining the ecology, morphology and performance of four species of Central American aquatic anoles belonging to two different lineages. Overall, we find that aquatic anoles overlap in multiple ecological and morphological dimensions. However, we do find some differences in substrate use, claw and limb morphology, and bite force that distinguish Anolis aquaticus from the other three species (A. lionotus, A. oxylophus and A. poecilopus). Our results suggest that A. aquaticus is adapted to climb on boulders, whereas the other species utilise vegetation in streamside habitats.     

PAR3–PAR6–atypical PKC polarity complex proteins in neuronal polarization

Polarity is a fundamental feature of cells. Protein complexes, including the PAR3–PAR6–aPKC complex, have conserved roles in establishing polarity across a number of eukaryotic cell types. In neurons, polarity is evident as distinct axonal versus dendritic domains. The PAR3, PAR6, and aPKC proteins also play important roles in neuronal polarization. During this process, either aPKC kinase activity, the assembly of the PAR3–PAR6–aPKC complex or the localization of these proteins is regulated downstream of a number of signaling pathways. In turn, the PAR3, PAR6, and aPKC proteins control various effector molecules to establish neuronal polarity. Herein, we discuss the many signaling mechanisms and effector functions that have been linked to PAR3, PAR6, and aPKC during the establishment of neuronal polarity.