Effect of Co substitution on the structural,dielectric and optical properties of KBiFe2O5

Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co0.1O5 (KBFCO). The optical bandgap energy (Eg) of KBFO decreased from 1.59 to 1.51 eV because of Co substitution. The decrease in bandgap can be attributed to the tilting of the Fe–O tetrahedral structure of KBFCO. The observed room-temperature Raman peaks of KBFCO shifted by 3 cm?1 toward a lower wavenumber than that of KBFO. The shift in Raman active modes can be attributed to the change in the bond angles and bond lengths of the Fe–O tetrahedral structure and modification in response to oxygen deficiency in KBFO because of Co doping. Compared with that of KBFO, the frequency-dependent dielectric constant and dielectric loss of KBFCO decrease at room temperature, which is a con-sequence of the reduction in oxygen migration and modification in response to vibrational modes present in the sample.     

Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

The coconut pathosystem: weed hosts of nymphs of the American palm Cixiid Haplaxius crudus (Hemiptera: Fulgoroidea)

Lethal yellowing (LY) of coconut palm (Cocos nucifera L., Arecaceae) is a disease of economic importance that is caused by the phytoplasma ‘Candidatus Phytoplasma palmae’ and is transmitted by the planthopper Haplaxius crudus (Van Duzee) (Hemiptera: Cixiidae). This study explores the weeds used by H. crudus nymphs and other Cixiidae in a coconut pathosystem in southern Mexico. Nymphs were collected directly from the root system of each weed by hand or with the help of a vacuum after carefully opening the culm. This study included 11 species of weeds: nine Poaceae [Brachiaria decumbens Stapf, B. humidicola (Rendle) Schweick, B. mutica (Forssk.) Stapf, Digitaria abyssinica (Hochst. Ex A. Rich.) Stapf, Eustachys petraea (Sw.) Desv., Leersia hexandra Sw., Panicum laxum Sw., P. maximum Jacq., Paspalum notatum Flüggé]; one Cyperaceae [Cyperus ligularis L.], and one Portulacaceae: [Portulaca pilosa L.]. Brachiaria mutica, E. petraea, B. humidicola, P. maximum were identified as the principal host species for H. crudus nymphs. Brachiaria decumbens, D. abyssinica, and C. ligularis are new host records for the nymphs of H. crudus. Additionally, it was found that H. crudus may coexist with its cogeners H. skarphion Kramer (Cixiidae) and H. caldwelli Kramer (Cixiidae), on B. mutica. On C. ligularis, H. crudus may coexist with Oecleus snowi Ball (Cixiidae) nymphs. These results suggest that in the coconut pathosystem there is a complex of multitrophic interactions that should be considered in integrated management of LY.     

Coral reef tanaidacean assemblages along the SW and SE Gulf of Mexico: biodiversity,geographic distribution and community structure

The biodiversity, geographic distribution, and community parameters of the benthic tanaidaceans associated with three coral reefs along the SW and SE Gulf of Mexico were analysed. A total of 15,525 specimens were grouped in 36 species. The highest value of abundance was found in the PNSAV with 6382 tanaidaceans. The PNSAV presented 30 species, the ANPT-L 16 species, and the SABS 17 species. The species with the widest distribution were Pseudonototanais sp., Condrochelia dubia, Leptochelia forresti, Synapseudes sp., Haplopolemius propinquus, Alloleptochelia longimana, and Paradoxapseudes bermudeus. In the Veracruz System Reef, the highest abundance was recorded for Condrochelia dubia and Pseudonototanais sp. The highest value of diversity was obtained in the SABS (3.08 bits/ind in the reef Bajo Diez), and the lowest value was found in the PNSAV (0.07 bits/ind in the reef Isla de Enmedio). The highest value of abundance was found in coral rubble and macroalgae. A significant relationship between depth and specific richness was found in the three reef systems. Using cluster analysis, three groups were found in each system, mainly related to the proximity to the coast and to urban areas. This is one of the first studies to show the specific substrate and attributes of three communities of tanaidaceans along the SE–SW coast of the Gulf of Mexico.     

Patient participation in the clinical encounter and clinical practice guidelines: The case of patients’ participation in a GRADEd world

It is widely acknowledged that the patient's perspective should be considered when making decisions about how her care will be managed. Patient participation in the decision making process may play an important role in bringing to light and incorporating her perspective. The GRADE framework is touted as an evidence-based process for determining recommendations for clinical practice; i.e. determining how care ought to be managed. GRADE recommendations are categorized as “strong” or “weak” based on several factors, including the “values and preferences” of a “typical” patient. The strength of the recommendation also provides instruction to the clinician about when and how patients should participate in the clinical encounter, and thus whether an individual patient's values and preferences will be heard in her clinical encounter. That is, a “strong” recommendation encourages “paternalism” and a “weak” recommendation encourages shared decision making. We argue that adoption of the GRADE framework is problematic to patient participation and may result in care that is not respectful of the individual patient's values and preferences. We argue that the root of the problem is the conception of “values and preferences” in GRADE – the framework favours population thinking (e.g. “typical” patient “values and preferences”), despite the fact that “values and preferences” are individual in the sense that they are deeply personal. We also show that tying the strength of a recommendation to a model of decision making (paternalism or shared decision making) constrains patient participation and is not justified (theoretically and/or empirically) in the GRADE literature.     

Development of gas tungsten arc welding using current pulsing technique to preclude chromium carbide precipitation in aerospace-grade alloy 80A

Weldments were produced using gas tungsten arc welding(GTAW) and pulsed current gas tungsten arc welding(PCGTAW) techniques with ERNiCr-3 filler wire. Macro examination revealed that the resultant weldments were free from defects. A refined microstructure was observed in the weldment fabricated through PCGTAW. Scanning electron microscopy(SEM) analysis revealed secondary phases in the grain boundaries. Energy-dispersive X-ray spectroscopy(EDS) analysis revealed that microsegregation of Cr carbide precipitates was completely eradicated through PCGTAW. The microsegregation of Nb precipitates was observed in the GTA and PCGTA weldments. X-ray diffraction(XRD) analysis revealed the existence of M_(23)C?_6 Cr-rich carbide and Ni_8Nb phases in the GTA weldments. By contrast, in the PCGTA weldments, the Ni_8Nb phase was observed. The Cr_2Ti phase was observed in both the GTA and the PCGTA weldments. Tensile tests showed that the strength and ductility of the PCGTA weldments were slightly higher than those of the GTA weldments.     

Synthesis of the 3D porous carbon-manganese oxide (3D-C@MnO) nanocomposite and its supercapacitor behavior study

A 3D porous carbon-manganese oxide ([email protected]) nanocomposite is successfully synthesized via a thermal plasma deposition method. The chemical bonds and compositions, phase structures, surface morphologies, etc. of as-obtained [email protected] nanocomposite were characterized by the various equipment, such as X-ray diffractometer, X-ray photoelectron spectroscopy, and electron microscopes. The electrochemical performances of the [email protected] nanocomposite electrode showed a specific capacitance of 780 F g^?1 at a current density of 2 A g^?1 and a capacitance retention rate of 99% after 5000 charge-discharge cycles at a high current density of 10 A g^?1. These excellent capacitive performances may be attributed to the encapsulation of MnO nanoparticles by porous carbon sheets in the [email protected] MnO nanocomposite structure. It is believed that the carbon-encapsulated MnO nanoparticles can be protected from a volume deformation during the charge adsorption/desorption cycle and can be electrically improved by the encapsulated carbon sheets, resulting in better overall capacitive performance. In addition, this study also demonstrates the practical applicability by assembling a supercapacitor using the as-obtained [email protected] nanocomposite to glow a light emitting diode.