Weldability and liquation cracking behavior of ZhS6U superalloy during electron-beam welding

The weldability of the ZhS6U nickel-based superalloy, which is prone to solidification cracking during electron-beam welding(EBW) repair processes, was investigated. The effects of two different pre-weld heat-treatment cycles on the final microstructure before and after welding were examined. Welds were made on flat coupons using an EBW machine, and the two heat-treatment cycles were designed to reduce γ′ liquation before welding. Microstructural features were also examined by optical and scanning electron microscopy. The results showed that the change in the morphology and size of the γ′ precipitates in the pre-weld heat-treatment cycles changed the ability of the superalloy to release the tensile stresses caused by the matrix phase cooling after EBW. The high hardness in the welded coupons subjected to the first heat-treatment cycle resulted in greater resistance to stress release by the base alloy, and the concentration of stress in the base metal caused liquation cracks in the heat-affected zone and solidification cracks in the weld area.     

Secure Two-Party Distance Computation Protocol Based on Privacy Homomorphism and Scalar Product in Wireless Sensor Networks

Numerous privacy-preserving issues have emerged along with the fast development of the Internet of Things. In addressing privacy protection problems in Wireless Sensor Networks(WSN), secure multi-party computation is considered vital, where obtaining the Euclidian distance between two nodes with no disclosure of either side’s secrets has become the focus of location-privacy-related applications. This paper proposes a novel Privacy-Preserving Scalar Product Protocol(PPSPP) for wireless sensor networks. Based on PPSPP, we then propose a Homomorphic-Encryption-based Euclidean Distance Protocol(HEEDP) without third parties. This protocol can achieve secure distance computation between two sensor nodes. Correctness proofs of PPSPP and HEEDP are provided, followed by security validation and analysis. Performance evaluations via comparisons among similar protocols demonstrate that HEEDP is superior; it is most efficient in terms of both communication and computation on a wide range of data types, especially in wireless sensor networks.     

Improvement in the protective performance and adhesion of polypyrrole coating on AZ31 Mg alloys

The electrochemical synthesis of polypyrrole (Ppy) coating on AZ31 magnesium alloy was successfully achieved in a solution containing sodium salicylate and monomer of pyrrole through cyclic voltammetry technique. The effect of potential range, passivation pretreatment and number of cycles of polymerization on the quality and protective performance of the coatings was evaluated using surface analysis and electrochemical techniques. Through taking the advantage of charge transfer resistance, current density, corrosion potential, optical microscopy images and SEM micrographs, the optimum condition of synthesis of a Ppy coating with the best adhesion and corrosion protection was determined. The optimal PPy coating synthesized over AZ31 increases the polarization resistance and decreases the corrosion current more than one order of magnitude and shift the corrosion potential about 200 mV toward nobler potentials. The SEM studies showed that Ppy coating have cauliflower morphology of Ppy grains with a diameter ranging from 20 nm to 60 nm.     

Hot compression deformation behavior of AISI 321 austenitic stainless steel

The hot compression behavior of AISI 321 austenitic stainless steel was studied at the temperatures of 950–1100℃ and the strain rates of 0.01–1 s?1 using a Baehr DIL-805 deformation dilatometer. The hot deformation equations and the relationship between hot deformation parameters were obtained. It is found that strain rate and deformation temperature significantly influence the flow stress behavior of the steel. The work hardening rate and the peak value of flow stress increase with the decrease of deformation temperature and the increase of strain rate. In addition, the activation energy of deformation (Q) is calculated as 433.343 kJ/mol. The microstructural evolution during deformation indicates that, at the temperature of 950℃ and the strain rate of 0.01 s?1, small circle-like precipitates form along grain boundaries; but at the temperatures above 950℃, the dissolution of such precipitates occurs. Energy-dispersive X-ray analyses indicate that the precipitates are complex carbides of Cr, Fe, Mn, Ni, and Ti.     

Kinetics and mechanism of titanium hydride powder and aluminum melt reaction

Based on the measurement of the released hydrogen gas pressure (P_H2), the reaction kinetics between TiH₂ powder and pure aluminum melt was studied at various temperatures. After cooling the samples, the interface of TiH₂ powder and aluminum melt was studied. The results show that the 2 H P_H2-time curves have three regions; in the first and second regions, the rate of reaction conforms zero and one order, respectively; in the third region, the hydrogen gas pressure remains constant and the rate of reaction reaches zero. The main factors that control the rate of reaction in the first and second regions are the penetration of hydrogen atoms in the titanium lattice and the chemical reaction between molten aluminum and titanium, respectively. According to the main factors that control the rate of reaction, three temperature ranges are considered for the reaction mechanism:(a) 700-750℃, (b) 750-800℃, and (c) 800-1000℃. In the first temperature range, the reaction is mostly under the control of chemical reaction; at the temperature range of 750 to 800℃, the reaction is controlled by the diffusion and chemical reaction; at the third temperature range (800-1000℃), the dominant controlling mechanism is diffusion.     

Bypassing genomic imprinting allows seed development

In developing progeny of mammals the two parental genomes are differentially expressed according to imprinting marks, and embryos with only a uniparental genetic contribution die. Gene expression that is dependent on the parent of origin has also been observed in the offspring of flowering plants, and mutations in the imprinting machinery lead to embryonic lethality, primarily affecting the development of the endosperm-a structure in the seed that nourishes the embryo, analogous to the function of the mammalian placenta. Here we have generated Arabidopsis thaliana seeds in which the endosperm is of uniparental, that is, maternal, origin. We demonstrate that imprinting in developing seeds can be bypassed and viable albeit smaller seedlings can develop from seeds lacking a paternal contribution to the endosperm. Bypassing is only possible if the mother is mutant for any of the FIS-class genes, which encode Polycomb group chromatin-modifying factors. Thus, these data provide functional evidence that the action of the FIS complex balances the contribution of the paternal genome. As flowering plants have evolved a special reproduction system with a parallel fusion of two female with two male gametes, our findings support the hypothesis that only with the evolution of double fertilization did the action of the FIS genes become a requirement for seed development. Furthermore, our data argue for a gametophytic origin of endosperm in flowering plants, thereby supporting a hypothesis raised in 1900 by Eduard Strasburger.     

Construction of some hypergroups from combinatorial structures

Jajcay‘s studies( 1993 ; 1994) on the automorphism groups of Cayley maps yielded a new product of groups, which he called, rotary product. Using this product, we define a hyperoperation ⊙ on the group Syme (G) , the stabilizer of the identity e ∈ G in the group Sym (G) . We prove that ( Syme (G) , ⊙) is a hypergroup and characterize the subhypergroups of this hypergroup.Finally, we show that the set of all subhypergroups of Syme ( G ) constitute a lattice under ordinary join and meet and that the minimal elements of order two of this lattice is a subgroup of Aut (G) .     

西藏谢通门县雄村铜(金)矿矿石物质成分研究及其意义

西藏谢通门县雄村铜(金)矿是新发现的超大型细脉浸染型铜(金)矿.通过详细的岩石学、矿石学研究,表明矿石类型主要分为氧化矿石、次生硫化物矿石和细脉浸染状硫化物矿石三大类型.矿石主要为细脉浸染状.主要金属矿物为黄铜矿、黄铁矿、磁铁矿、磁黄铁矿,其次是辉铜矿等.主要非金属矿物为石英,约占矿物总量的60%～70%;其次是红柱石、钾长石、斜长石、黑云母、白云母、绢云母、绿帘石、石榴子石等.矿石主成矿元素以Cu为主,伴生有用组分为Au,Ag,Zn和Pb等.