Tribological behavior of CrN-coated Cr-Mo-V steels used as die materials

DIN 1.2343 and 1.2367 steels are commonly used as die materials in aluminum extrusion, and single/duplex/multi-coatings enhance their surface properties. The design of an appropriate substrate/coating system is important for improving the tribological performance of these steels under service conditions because the load-carrying capacity of the system can be increased by decreasing the plastic deformation of the substrate. In this study, the tribological behavior of CrN-coated Cr-Mo-V steels (DIN 1.2343, 1.2367, and 1.2999 grades) was investigated using different setups and tribological pairs at room and elevated temperatures. The aim of this study was to reveal the wear resistance of a suggested system (1.2999/CrN) not yet studied and to understand both the wear and the failure characteristics of coated systems. The results showed that (i) among the steels studied, the DIN 1.2999 grade steel exhibited the lowest friction coefficient because it had the highest load-carrying capacity as a result of secondary hardening at elevated temperatures; (ii) at room temperature, both abrasive tracks and adhesive layers were observed on the worn surfaces; and (iii) a combination of chemical reactions and progressive oxidation caused aluminum adhesion on the worn surface, and the detachment of droplets and microcracking were the characteristic damage mechanisms at high temperatures.     

Determination of discontinuities in marble blocks via a nondestructive ultrasonic technique

Miners working in the marble industry have always been interested in identifying structural weaknesses in marble blocks before they are transported to marble processing plants. To achieve this difficult task, several simple methods have been developed among miners but observation-based methods do not consistently provide satisfactory results. A nondestructive method developed for testing concrete could be used for this purpose. In this study, this simple method based on differences in ultrasonic wave propagation in different materials was presented, and the test results performed both in the laboratory and a marble quarry were discussed.     

Mutations in kelch-like 3 and cullin 3 cause hypertension and electrolyte abnormalities

Hypertension affects one billion people and is a principal reversible risk factor for cardiovascular disease. Pseudohypoaldosteronism type II (PHAII), a rare Mendelian syndrome featuring hypertension, hyperkalaemia and metabolic acidosis, has revealed previously unrecognized physiology orchestrating the balance between renal salt reabsorption and K(+) and H(+) excretion. Here we used exome sequencing to identify mutations in kelch-like 3 (KLHL3) or cullin 3 (CUL3) in PHAII patients from 41 unrelated families. KLHL3 mutations are either recessive or dominant, whereas CUL3 mutations are dominant and predominantly de novo. CUL3 and BTB-domain-containing kelch proteins such as KLHL3 are components of cullin-RING E3 ligase complexes that ubiquitinate substrates bound to kelch propeller domains. Dominant KLHL3 mutations are clustered in short segments within the kelch propeller and BTB domains implicated in substrate and cullin binding, respectively. Diverse CUL3 mutations all result in skipping of exon 9, producing an in-frame deletion. Because dominant KLHL3 and CUL3 mutations both phenocopy recessive loss-of-function KLHL3 mutations, they may abrogate ubiquitination of KLHL3 substrates. Disease features are reversed by thiazide diuretics, which inhibit the Na-Cl cotransporter in the distal nephron of the kidney; KLHL3 and CUL3 are expressed in this location, suggesting a mechanistic link between KLHL3 and CUL3 mutations, increased Na-Cl reabsorption, and disease pathogenesis. These findings demonstrate the utility of exome sequencing in disease gene identification despite the combined complexities of locus heterogeneity, mixed models of transmission and frequent de novo mutation, and establish a fundamental role for KLHL3 and CUL3 in blood pressure, K(+) and pH homeostasis.     

Co-design Research and Business Development: Case of Scandinavian Airlines (SAS)

This paper is presenting a case study of Scandinavian Airlines Systems (SAS) showing how improvements of service quality aspects with Avatars can be managed with a Co-design research approach. The Co-design practices are carried out in different fields of studies. Some of the key advocates of Co-design originate from business. In this study the four steps of Co-design approach is applied. From the first step of Co-design, through interviews, log analysis and a channel survey, findings show that the failed dialogues with Avatar Eva are mainly concerned with five factors: interactivity; dialogue capability; consistency; knowledge; and synonyms. In the second step, carrying out customer workshops, we suggested ten ideal scenarios for Avatar Eva to perform better. In the third step, SAS decision makers decided to implement the first three scenarios: Eva’s synonyms; knowledge and Eva’s consistency. In the fourth step, another channel survey was carried out as well as a new log analysis to know the impact of the redevelopment above three scenarios. An important result of the study was that the company adopted a continuous use of Co-design as an approach of continuous improvement of the service quality performed by the Avatar Eva. It also opens a new set of questions framing the relation and transformation between Co-design as a research approach for knowledge creation and Co-design as a method for innovation and service quality improvements. The study presents an Extended Co-design Model, which illustrates how the Co-design inspires staff to use it for other functions within and without the SAS.     

Solid-particle erosion behavior of cast alloys used in the mining industry

The erosive-wear response of five commercial ferrous-based cast alloys used for crushing was examined in this study. The micro-structures of the alloys were modified to elucidate the effect of microstructural features on wear. Erosion tests were conducted using alumi-num oxide particles (90–125 μm) at 70 m/s and a normal impact angle (90°). The worn surfaces were characterized by scanning electron mi-croscopy and 3D non-contact laser profilometry. It is found that (i) a pearlitic structure exhibiting a greater plastic deformation than both bainitic and martensitic structures shows the greatest resistance to erosive wear at normal impact and (ii) the fracture characteristics of car-bide and graphite particles plays an important role in determining the erosion wear behavior of the cast alloy matrices.     

Wnk4 controls blood pressure and potassium homeostasis via regulation of mass and activity of the distal convoluted tubule

The mechanisms that govern homeostasis of complex systems have been elusive but can be illuminated by mutations that disrupt system behavior. Mutations in the gene encoding the kinase WNK4 cause pseudohypoaldosteronism type II (PHAII), a syndrome featuring hypertension and hyperkalemia. We show that physiology in mice transgenic for genomic segments harboring wild-type (TgWnk4(WT)) or PHAII mutant (TgWnk4(PHAII)) Wnk4 is changed in opposite directions: TgWnk4(PHAII) mice have higher blood pressure, hyperkalemia, hypercalciuria and marked hyperplasia of the distal convoluted tubule (DCT), whereas the opposite is true in TgWnk4(WT) mice. Genetic deficiency for the Na-Cl cotransporter of the DCT (NCC) reverses phenotypes seen in TgWnk4(PHAII) mice, demonstrating that the effects of the PHAII mutation are due to altered NCC activity. These findings establish that Wnk4 is a molecular switch that regulates the balance between NaCl reabsorption and K+ secretion by altering the mass and function of the DCT through its effect on NCC.     

Total thyroidectomy is safer with identification of recurrent laryngeal nerve

Objective： To investigate the effect of recurrent laryngeal nerve （RLN） identification on the complications after total thyroidectomy and lobectomy. Methods： Total 134 consecutive patients undergoing total thyroidectomy or thyroid lobectomy from January 2003 to November 2004 were investigated retrospectively. Patients were divided into two groups： RLN identified （Group A） or not （Group B）. The two groups were compared for RLN injury and hypocalcaemia. Results： The numbers of patients and nerves at risk were 71 and 129 in Group A, and 63 and 121 in Group B, respectively, RLN injury in Group A （0） was significantly lower than that in Group B （5 [7.9%]） patients, 7 [5.8%] nerves） for the numbers of patients （P=0.016） and nerves at risk （P=0.006）. Temporary hypocalcaemia was significantly higher in Group A than in Group B （14 [24.1%] vs 6 [ 10.3%], P=0.049）, Permanent complications in Group B were significantly higher than those in Group A （13 [20.6%] vs 4 [5.6%], P=0.009）. Conclusion： RLN injury was prevented and permanent complications were decreased by identifying the whole course and branches of the recurrent laryngeal nerve during total thyroidectomy,     

Drainage after total thyroidectomy or lobectomy for benign thyroidal disorders

Objective： This prospective randomized clinical trial was conducted to evaluate the necessity of drainage after total thyroidectomy or lobectomy for benign thyroidal disorders. Methods： A total of 116 patients who underwent total thyroidectomy or lobectomy for benign thyroidal disorders were randomly allocated to be drained or not. Operative and postoperative outcomes including operating time, postoperative pain assessed by visual analogue scale （VAS）, total amount of intramuscular analgesic administration, hospital stay, complications, necessity for re-operation and satisfaction of patients were all assessed. Results： The mean operating time was similar between two groups （the drained and non-drained groups）. The mean VAS score was found to be significantly low in the non-drained group patients in postoperative day （POD） 0 and POD 1. The mean amount of intramuscular analgesic requirement was significantly less in the non-drained group. One case of hematoma, two cases ofseroma and three cases of transient hypoparathyroidism occurred in the non-drained group, whereas one case of hematoma, two cases of seroma, two cases of wound infections and two cases of transient hypoparathyroidism occurred in the drained group. No patient needed re-operation for any complication. The mean hospital stay was significantly shorter and the satisfaction of patients was superior in the non-drained group. Conclusion： These findings suggest that postoperative complications cannot be prevented by using drains after total thyroidectomy or lobectomy for benign thyroid disorders. Furthermore, the use of drains may increase postoperative pain and the analgesic requirement, and prolong the hospital stay. In the light of these findings, the routine use of drains might not be necessary after thyroid surgery for benign disorders.     

Mechanical properties and microstructure of composites produced by recycling metal chips

In this study, the processing and mechanical properties of porous metal matrix composites (MMCs) composed of spheroidal cast iron chips (GGG40) and bronze chips (CuSn10) and formed by hot isostatic pressing were investigated. Bronze chips (CuSn10) were used as a matrix component, and spheroidal cast iron (GGG40) chips were used as a reinforcement component. The MMCs were produced with different CuSn10 contents (90wt%, 80wt%, 70wt%, and 60wt%). The hot isostatic pressing process was performed under three different pressures and temperatures. The produced MMCs were characterized using density tests, Brinell hardness tests, and compression tests. In addition, the consolidation mechanism was investigated by X-ray diffraction (XRD) analysis and scanning electron microscopy. The test results were compared with those for bulk CuSn10 and bulk GGG40. Mechanical tests results revealed that the metallic chips can be recycled by using hot pressing and that the mechanical properties of the produced MMCs were similar to those of bulk CuSn10. XRD and microscopy studies showed that no intermetallic compounds formed between the metallic chips. The results showed that the CuSn10 and GGG40 chips were consolidated by mechanical interlocking.     

PLA2G6, encoding a phospholipase A2, is mutated in neurodegenerative disorders with high brain iron

Neurodegenerative disorders with high brain iron include Parkinson disease, Alzheimer disease and several childhood genetic disorders categorized as neuroaxonal dystrophies. We mapped a locus for infantile neuroaxonal dystrophy (INAD) and neurodegeneration with brain iron accumulation (NBIA) to chromosome 22q12-q13 and identified mutations in PLA2G6, encoding a calcium-independent group VI phospholipase A2, in NBIA, INAD and the related Karak syndrome. This discovery implicates phospholipases in the pathogenesis of neurodegenerative disorders with iron dyshomeostasis.