Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

Effect of Co substitution on the structural,dielectric and optical properties of KBiFe2O5

Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co0.1O5 (KBFCO). The optical bandgap energy (Eg) of KBFO decreased from 1.59 to 1.51 eV because of Co substitution. The decrease in bandgap can be attributed to the tilting of the Fe–O tetrahedral structure of KBFCO. The observed room-temperature Raman peaks of KBFCO shifted by 3 cm?1 toward a lower wavenumber than that of KBFO. The shift in Raman active modes can be attributed to the change in the bond angles and bond lengths of the Fe–O tetrahedral structure and modification in response to oxygen deficiency in KBFO because of Co doping. Compared with that of KBFO, the frequency-dependent dielectric constant and dielectric loss of KBFCO decrease at room temperature, which is a con-sequence of the reduction in oxygen migration and modification in response to vibrational modes present in the sample.     

东北梅花鹿肠道纤维素降解微生物的分离筛选

食草动物依赖胃肠道微生物分解利用天然木质纤维素物质。为获得高效纤维素降解菌，本文将东北梅花鹿粪便样品，经过研磨，重悬于羧甲基纤维素钠（CMC-Na）作为唯一碳源的富集培养基中，进行富集培养和筛选，用革兰氏碘液染色显示纤维素水解圈，通过纤维素水解圈直径（D）和菌落直径（d）比值，初步判断纤维素降解菌降解纤维素能力．筛选出106株纤维素降解微生物，包括72株细菌、22株真菌和12株放线菌．细菌16S rDNA和真菌ITS序列测序结果显示，这些纤维素降解菌主要集中分布于变形菌门（Proteobacteria）、厚壁菌门（Firmicutes）、放线菌门（Actinobacteria）和子囊菌门（Ascomycota）．本文提供了一种快速有效的反刍动物肠道纤维素降解微生物的筛选方法，为东北梅花鹿肠道微生物高通量测序结果提供实验数据支持．      

Maxwell's role in turning the concept of model into the methodology of modeling

This is a contribution towards a history and philosophy of modeling in its early stages in electromagnetism. In 1873, James Clerk Maxwell (1831–1879) hinted at the methodology of modeling at the end of his Treatise on Electricity and Magnetism. We focus on Maxwell's impact on physicists who immediately followed him, specifically Oliver Lodge (1851–1940) and George Francis FitzGerald (1851–1901). We begin with the role that the scientific concept of model played in the late nineteenth century, as assessed by Ludwig Boltzmann (1844–1906). We then discuss the role of hypothesis as a methodology, the appeal to (dynamical) illustration, and the way Maxwell applied model and working model in his studies of electromagnetism. We show that for Maxwell these key terms were kept distinct, but Lodge did not maintain these distinctions and, in this regard, FitzGerald followed Lodge. Notwithstanding Lodge's influence, Fitzgerald modified Maxwell's theory based on the mechanical model he designed, thereby implicitly taking the first step towards modeling. This methodology consists in drawing consequences from the (mechanical) model to the (electrodynamic) theory and modifying the latter in light of the functioning of the former. At the core of our argument is the thesis that it was a methodological novelty to move from the concept of model to the methodology of modeling. The introduction of modeling as a new methodology into physics in the late nineteenth century was a major event which deserves proper recognition.     

ICP-MS法测定钼矿石中伴生锂、镓和稀土元素

通过比较氢氟酸-硝酸高压罐密闭消解法、 氢氟酸-硝酸-高氯酸-盐酸低压密闭消解法和氢氟酸-硝酸-高氯酸-盐酸敞口消解法对钼矿样品的分解效果， 选用低压密闭消解法制备样品， 用电感耦合等离子体质谱（ICP-MS)法测定伴生稀有元素Li，Ga和15种稀土元素的质量比. 通过对干扰元素的分析， 选择合适同位素， 并确定¹⁵¹Eu，¹⁵⁷Gd，¹⁵⁹Tb质谱干扰的校正系数. 结果表明，  20 μg/L的铑（Rh）标准溶液作为内标可有效抑制溶液中的基体效应和信号动态漂移， 方法检出限为0.001~0.113 μg/g， 相对标准偏差（RSD， n=7）为0.30%~3.92%.  经标准物质和实际样品验证， 该方法可靠， 适合钼矿中伴生Li，Ga和稀土元素的测定.     

Methods for backcasting,nowcasting and forecasting using factor‐MIDAS: With an application to Korean GDP

We utilize mixed‐frequency factor‐MIDAS models for the purpose of carrying out backcasting, nowcasting, and forecasting experiments using real‐time data. We also introduce a new real‐time Korean GDP dataset, which is the focus of our experiments. The methodology that we utilize involves first estimating common latent factors (i.e., diffusion indices) from 190 monthly macroeconomic and financial series using various estimation strategies. These factors are then included, along with standard variables measured at multiple different frequencies, in various factor‐MIDAS prediction models. Our key empirical findings as follows. (i) When using real‐time data, factor‐MIDAS prediction models outperform various linear benchmark models. Interestingly, the “MSFE‐best” MIDAS models contain no autoregressive (AR) lag terms when backcasting and nowcasting. AR terms only begin to play a role in “true” forecasting contexts. (ii) Models that utilize only one or two factors are “MSFE‐best” at all forecasting horizons, but not at any backcasting and nowcasting horizons. In these latter contexts, much more heavily parametrized models with many factors are preferred. (iii) Real‐time data are crucial for forecasting Korean gross domestic product, and the use of “first available” versus “most recent” data “strongly” affects model selection and performance. (iv) Recursively estimated models are almost always “MSFE‐best,” and models estimated using autoregressive interpolation dominate those estimated using other interpolation methods. (v) Factors estimated using recursive principal component estimation methods have more predictive content than those estimated using a variety of other (more sophisticated) approaches. This result is particularly prevalent for our “MSFE‐best” factor‐MIDAS models, across virtually all forecast horizons, estimation schemes, and data vintages that are analyzed.     

Is the valid species Synchaeta monopus Plate, 1889 (Rotifera: Monogononta) a product of preparation artefacts?

The morphology of soft-bodied rotifers, including those of Synchaeta spp, can be strongly affected by preparation artefacts including contraction and deformation. The long-standing, valid species Synchaeta monopus is known exclusively from ethanol- or formaldehyde-preserved material and no live specimens of it have ever been described. Although this alone is cause for concern, we could also reproduce unique characteristics diagnostic for this species (e.g. the swollen body and the rudimental foot) by subjecting specimens of Synchaeta pectinata to the preservation conditions under which it was first described. This proxy experiment and comparisons to other Synchaeta species indicate that literature occurrences of S. monopus likely represent preserved and deformed specimens of Synchaeta cecilia or other marine species of Synchaeta, thereby highlighting the importance of thorough morphological investigations of the habitus using live specimens and of features that are unaffected by preservation (e.g. the trophi). We therefore recommend that S. monopus be listed as a species inquirenda until topotypes are examined. Furthermore, in ecological studies including rotifers, where the examination of preserved material is often unavoidable, we stress that light-microscopical images of the habitus and trophi of the specimens minimally be included to facilitate independent verification of the species assignments.     

Degradation of the mitochondrial complex I assembly factor TMEM126B under chronic hypoxia

Cell stress such as hypoxia elicits adaptive responses, also on the level of mitochondria, and in part is mediated by the hypoxia-inducible factor (HIF) 1α. Adaptation of mitochondria towards acute hypoxic conditions is reasonably well understood, while regulatory mechanisms, especially of respiratory chain assembly factors, under chronic hypoxia remains elusive. One of these assembly factors is transmembrane protein 126B (TMEM126B). This protein is part of the mitochondrial complex I assembly machinery. We identified changes in complex I abundance under chronic hypoxia, in association with impaired substrate-specific mitochondrial respiration. Complexome profiling of isolated mitochondria of the human leukemia monocytic cell line THP-1 revealed HIF-1α-dependent deficits in complex I assembly and mitochondrial complex I assembly complex (MCIA) abundance. Of all mitochondrial MCIA members, we proved a selective HIF-1-dependent decrease of TMEM126B under chronic hypoxia. Mechanistically, HIF-1α induces the E3-ubiquitin ligase F-box/WD repeat-containing protein 1A (β-TrCP1), which in turn facilitates the proteolytic degradation of TMEM126B. Attenuating a functional complex I assembly appears critical for cellular adaptation towards chronic hypoxia and is linked to destruction of the mitochondrial assembly factor TMEM126B.