基于多材质复合管柱的裸眼井壁支撑工艺及应用

已完钻超深裸眼水平井侧钻技术是经济、高效开发油藏剩余油的主要手段之一，传统的磨铣钢套管开窗侧钻技术存在下入摩阻大、磨铣耗时长导致开窗失败等问题。为此，提出了基于多材质复合管柱的超深水平井裸眼井壁支撑工艺，结合中国西北油田已完钻超深裸眼水平井井况，首先，提出了基于“铝合金+碳钢”的多材质复合管柱组合及设计方法；其次，开展了基于管柱实物屈曲实验数据的管柱临界屈曲载荷计算模型适用性评价，并优选出了适合于“铝合金+碳钢”多材质复合管柱的屈曲临界载荷计算模型；最后，研究了综合考虑管柱扭矩、摩阻、刚性、井眼条件、管柱强度及材质的多材质复合管柱下入性分析方法，并利用下入性分析软件对西北油田顺北X1井、X2井、X3井、X4井复合管柱进行了下入可行性评价。该方法在X1井和X2井得到成功应用，进一步论证了该工艺现场应用的可行性。研究成果可为超深水平井裸眼井壁支撑的复合管柱设计和下入可行性评价提供理论参考。     

Blockage of the NLRP3 inflammasome by MCC950 improves anti-tumor immune responses in head and neck squamous cell carcinoma

The NLRP3 inflammasome is a critical innate immune pathway responsible for producing active interleukin (IL)-1β, which is associated with tumor development and immunity. However, the mechanisms regulating the inflammatory microenvironment, tumorigenesis and tumor immunity are unclear. Herein, we show that the NLRP3 inflammasome was over-expressed in human HNSCC tissues and that the IL-1β concentration was increased in the peripheral blood of HNSCC patients. Additionally, elevated NLRP3 inflammasome levels were detected in tumor tissues of Tgfbr1/Pten 2cKO HNSCC mice, and elevated IL-1β levels were detected in the peripheral blood serum, spleen, draining lymph nodes and tumor tissues. Blocking NLRP3 inflammasome activation using MCC950 remarkably reduced IL-1β production in an HNSCC mouse model and reduced the numbers of myeloid-derived suppressor cells (MDSCs), regulatory T cells (Tregs) and tumor-associated macrophages (TAMs). Moreover, inhibiting NLRP3 inflammasome activation increased the numbers of CD4⁺ and CD8⁺ T cells in HNSCC mice. Notably, the numbers of exhausted PD-1⁺ and Tim3⁺ T cells were significantly reduced. A human HNSCC tissue microarray showed that NLRP3 inflammasome expression was correlated with the expression of CD8 and CD4, the Treg marker Foxp3, the MDSC markers CD11b and CD33, and the TAM markers CD68 and CD163, PD-1 and Tim3. Overall, our results demonstrate that the NLRP3 inflammasome/IL-1β pathway promotes tumorigenesis in HNSCC and inactivation of this pathway delays tumor growth, accompanied by decreased immunosuppressive cell accumulation and an increased number of effector T cells. Thus, inhibition of the tumor microenvironment through the NLRP3 inflammasome/IL-1β pathway may provide a novel approach for HNSCC therapy.     

基于回波预处理和相参积累的C&I干扰抑制算法

C&I(chopping and interleaving)干扰是一种针对线性调频(linear frequency modulation, LFM)雷达的典型干扰样式, 干扰子信号调频斜率与雷达发射信号相同, 利用信号处理工具分离真实回波与干扰信号难度较大。针对该问题, 以LFM相参雷达抗自卫式C&I干扰为背景, 提出基于回波预处理和相参积累的干扰抑制算法。根据估计的回波时延, 设置距离窗截取受干扰回波段, 在此基础上, 通过对回波预处理, 改变不同重复周期内假目标的快时间位置分布, 通过相参积累实现干扰抑制。仿真试验表明, 所提算法能够有效抑制强干扰背景下的C&I干扰, 干扰抑制后真实目标检测概率大幅提高, 虚假目标数量明显减少。     

Geochemistry of Clayey Aquitard Pore Water as Archive of Paleo-Environment,Western Bohai Bay

The record of paleo-environment in clayey aquitard pore water is much more effective relative to aquifer groundwater owing to the low permeability of clayey aquitard. Oxygen-18 (18O), deuterium (D), an...     

磁流变液中磁性颗粒成链与团聚的临界特征分析

热运动对纳米级磁流变液系统的颗粒团聚行为和宏观流变特性扰动影响不可忽视.为研究施加外磁场后系统微结构与热运动间的关系，探讨在不同颗粒粒径情况下热运动能量在系统总能量中的占比.采用CCD设计方法，分析Monte Carlo仿真获取的颗粒位形信息，生成关于外磁场磁感应强度、颗粒粒径和体积分数的系统热耦合系数<λ>回归模型;成链团聚的临界颗粒粒径计算值比文献经验值高出约23%，证实在考虑系统内多因素的综合影响下，纳米级磁流变液具有更严格的流变现象临界发生条件.     

基于新型空间注意力机制和迁移学习的垃圾图像分类算法

随着我国各级政府大力推动垃圾强制分类,分类回收各环节中实现标准化、自动化的垃圾分类识别需要适合云端部署的高准确率、低延时要求的细粒度图像分类模型.本文发挥深度迁移学习的优势建立了一套端到端的迁移学习网络架构GANet (garbage neural network);针对垃圾分类中类别易混淆、背景干扰等挑战,提出一种新型的像素级空间注意力机制PSATT (pixel-level spatial attention).为克服类别多和样本不平衡挑战,提出使用标签平滑正则化损失函数;为改善收敛速度以及模型稳定性与泛化性,提出了阶梯形OneCycle学习率控制方法,并给出了结合Rectified Adam (RAdam)优化方法和权重平滑处理技术的组合使用策略.实验使用了"华为云人工智能大赛.垃圾分类挑战杯"提供的按照深圳市垃圾分类标准标注的训练数据,验证了GANet在垃圾分类问题中的显著效果,获得了全国二等奖(第2名);同时,提出的PSATT机制优于对比方法,且在不同主干网络架构上均得到了提升,具有良好的通用性.本文提出的GANet架构、PSATT机制和训练策略不仅具有重要的工程参考价值,也具有较好的学术价值.     

我国股票市场行业间波动溢出效应研究——基于改进的EMD去噪方法

针对我国股市噪声交易能量较大、行业指数同步性较高的特点,提出改进的EMD(empirical mode decomposition,经验模态分解)去噪方法对行业数据进行处理,进而采用BEKK-GARCH模型分析金融危机前、金融危机期间、金融危机后三个阶段行业间波动溢出效应.研究表明,在降低股价同步性方面,改进的EMD去噪方法效果更佳;行业间波动溢出效应在金融危机期间显著上升,金融危机后回落;较之金融危机前,金融危机后传统制造业受产业链上游的波动溢出效应有所降低、受科研的波动溢出效应有增强的趋势.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

Virtual Garment Sewing

Introduction3D garment CAD tools are increasingly required byclothing industries to assist the cloth design andmanufacturing process for quick response when faced withrapidly changing in style and fabrics with variable materialproperties. In the context of virtual prototyping, modelingand simulation of garment fitting to mannequin areattracting more and more people from both research andindustrial communities.Different approaches and techniques can be used…