西湖凹陷西部斜坡带花港组、平湖组储层裂缝发育特征及有效裂缝测井识别

以西湖凹陷西斜坡花港组、平湖组致密砂岩储层为研究对象,通过录井资料分析及岩心和显微薄片观察,研究裂缝的宏观与微观发育特征及其影响因素.结果显示其主要发育层理缝和构造缝.层理缝主要为水平缝和低角度缝,且已被充填;构造缝主要为垂直缝和高角度缝,充填缝和未充填缝各占一半.裂缝的发育受岩性、单层厚度、断裂及地应力场的综合影响.在交会图法(定性)和概率判别法(半定量)研究的基础上,将岩心观察统计结果与常规测井曲线和成像测井成果相对比,综合预测与评价裂缝发育段,认为有利的裂缝发育层段为花港组下段和平湖组中下段.     

基于放电检测和机器视觉技术的火花塞缺陷检测系统

为了减少传统人眼目测检测造成的误差,提高火花塞的缺陷检测效率,设计了1种基于放电检测技术和机器视觉技术的火花塞缺陷检测系统.火花塞缺陷检测系统由工控机、NI DAQ数据采集卡、IGBT驱动板、IGBT模块、点火线圈、分压模块和工业相机构成.利用脉宽调制技术和电磁感应原理,对火花塞施加电压,通过抓拍点火线圈电压输出下火花塞放电火花的位置信息,检测火花塞陶瓷件是否存在缺陷.试验结果表明:该火花塞缺陷检测系统输出的放电高电压安全可测,检测精度更是高达95％,满足了火花塞缺陷检测的实际应用需求.     

Blockage of the NLRP3 inflammasome by MCC950 improves anti-tumor immune responses in head and neck squamous cell carcinoma

The NLRP3 inflammasome is a critical innate immune pathway responsible for producing active interleukin (IL)-1β, which is associated with tumor development and immunity. However, the mechanisms regulating the inflammatory microenvironment, tumorigenesis and tumor immunity are unclear. Herein, we show that the NLRP3 inflammasome was over-expressed in human HNSCC tissues and that the IL-1β concentration was increased in the peripheral blood of HNSCC patients. Additionally, elevated NLRP3 inflammasome levels were detected in tumor tissues of Tgfbr1/Pten 2cKO HNSCC mice, and elevated IL-1β levels were detected in the peripheral blood serum, spleen, draining lymph nodes and tumor tissues. Blocking NLRP3 inflammasome activation using MCC950 remarkably reduced IL-1β production in an HNSCC mouse model and reduced the numbers of myeloid-derived suppressor cells (MDSCs), regulatory T cells (Tregs) and tumor-associated macrophages (TAMs). Moreover, inhibiting NLRP3 inflammasome activation increased the numbers of CD4⁺ and CD8⁺ T cells in HNSCC mice. Notably, the numbers of exhausted PD-1⁺ and Tim3⁺ T cells were significantly reduced. A human HNSCC tissue microarray showed that NLRP3 inflammasome expression was correlated with the expression of CD8 and CD4, the Treg marker Foxp3, the MDSC markers CD11b and CD33, and the TAM markers CD68 and CD163, PD-1 and Tim3. Overall, our results demonstrate that the NLRP3 inflammasome/IL-1β pathway promotes tumorigenesis in HNSCC and inactivation of this pathway delays tumor growth, accompanied by decreased immunosuppressive cell accumulation and an increased number of effector T cells. Thus, inhibition of the tumor microenvironment through the NLRP3 inflammasome/IL-1β pathway may provide a novel approach for HNSCC therapy.     

Ni~(26+)离子态分辨光复合过程的R矩阵理论研究

利用基于相对论R矩阵理论的DARC程序系统计算了Ni 25+离子基态1s22s(2S1/2)和激发态1s22p(2P1/2,2P3/2)的光电离截面,并通过细致平衡原理获得了统一的光复合过程(即辐射复合和双电子复合)态分辨的截面,计算结果给出了辐射复合与双电子复合过程间的干涉效应.为了标识和分析KLL共振能区所有的共振峰,基于相对论组态相互作用理论(RCI)的FAC程序被用来计算共振峰的能量、强度及其相关的双激发态的辐射、俄歇跃迁几率以及共振宽度等.利用统一的光复合截面进一步得到了KLL双电子复合过程的伴线强度,并与孤立共振近似下FAC的计算结果以及以前的理论和实验结果进行了比较,对存在的一致性和偏差进行了分析和讨论.     

财政性科技经费监管体系探析

我国初步建立了财政性科技经费监管体系,但是在监督主体、监督制度等方面还存在缺陷,科技经费监督出现诸多问题。建立要加强宏观层面的统筹规划,建立由政府、承担单位和外部主体上下联动、横向联合的立体监督体系。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

苏南经济社会发展与高等应用型技术教育对策研究

分析高等应用型技术教育中面临的诸多挑战,探讨行之有效的人才培养对策。