西湖凹陷西部斜坡带花港组、平湖组储层裂缝发育特征及有效裂缝测井识别

以西湖凹陷西斜坡花港组、平湖组致密砂岩储层为研究对象,通过录井资料分析及岩心和显微薄片观察,研究裂缝的宏观与微观发育特征及其影响因素.结果显示其主要发育层理缝和构造缝.层理缝主要为水平缝和低角度缝,且已被充填;构造缝主要为垂直缝和高角度缝,充填缝和未充填缝各占一半.裂缝的发育受岩性、单层厚度、断裂及地应力场的综合影响.在交会图法(定性)和概率判别法(半定量)研究的基础上,将岩心观察统计结果与常规测井曲线和成像测井成果相对比,综合预测与评价裂缝发育段,认为有利的裂缝发育层段为花港组下段和平湖组中下段.     

一种含N低Ni经济型双相不锈钢的抗氢脆性能的研究

设计了一种新型低Ni经济型双相不锈钢，通过金相显微镜、X射线衍射仪和扫描电子显微镜对不同固溶温度处理后的试样进行表征，通过常规拉伸实验得到综合力学性能最佳的热处理温度点，并通过电化学预充氢后的慢应变速率拉伸实验探究了其氢脆敏感性能。实验表明，随着温度的升高，奥氏体体积分数明显下降，铁素体体积分数升高，氢在双相不锈钢中的扩散能力提高。在1 050 ℃下固溶处理5 min后水淬的经济型双相不锈钢（lean duplex stainless steel，LDSS）综合性能最佳，其屈服强度和抗拉强度分别为744.7 MPa和807.7 MPa，总伸长率为62%，并且该材料在不同温度都具有优异的加工硬化性能。通过对1 050 ℃热处理后的试样进行不同电流密度和时间的预充氢处理，发现其氢脆敏感性能受充氢时间影响大于充氢电流，氢原子主要在塑性变形阶段降低材料抗拉强度和伸长率，对屈服强度影响较小。     

Blockage of the NLRP3 inflammasome by MCC950 improves anti-tumor immune responses in head and neck squamous cell carcinoma

The NLRP3 inflammasome is a critical innate immune pathway responsible for producing active interleukin (IL)-1β, which is associated with tumor development and immunity. However, the mechanisms regulating the inflammatory microenvironment, tumorigenesis and tumor immunity are unclear. Herein, we show that the NLRP3 inflammasome was over-expressed in human HNSCC tissues and that the IL-1β concentration was increased in the peripheral blood of HNSCC patients. Additionally, elevated NLRP3 inflammasome levels were detected in tumor tissues of Tgfbr1/Pten 2cKO HNSCC mice, and elevated IL-1β levels were detected in the peripheral blood serum, spleen, draining lymph nodes and tumor tissues. Blocking NLRP3 inflammasome activation using MCC950 remarkably reduced IL-1β production in an HNSCC mouse model and reduced the numbers of myeloid-derived suppressor cells (MDSCs), regulatory T cells (Tregs) and tumor-associated macrophages (TAMs). Moreover, inhibiting NLRP3 inflammasome activation increased the numbers of CD4⁺ and CD8⁺ T cells in HNSCC mice. Notably, the numbers of exhausted PD-1⁺ and Tim3⁺ T cells were significantly reduced. A human HNSCC tissue microarray showed that NLRP3 inflammasome expression was correlated with the expression of CD8 and CD4, the Treg marker Foxp3, the MDSC markers CD11b and CD33, and the TAM markers CD68 and CD163, PD-1 and Tim3. Overall, our results demonstrate that the NLRP3 inflammasome/IL-1β pathway promotes tumorigenesis in HNSCC and inactivation of this pathway delays tumor growth, accompanied by decreased immunosuppressive cell accumulation and an increased number of effector T cells. Thus, inhibition of the tumor microenvironment through the NLRP3 inflammasome/IL-1β pathway may provide a novel approach for HNSCC therapy.     

财政性科技经费监管体系探析

我国初步建立了财政性科技经费监管体系,但是在监督主体、监督制度等方面还存在缺陷,科技经费监督出现诸多问题。建立要加强宏观层面的统筹规划,建立由政府、承担单位和外部主体上下联动、横向联合的立体监督体系。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

租赁设备的状态维修决策建模与优化

随着物联网技术飞速发展,租赁设备大多安装有传感系统,可以及时地对设备关键部件和整体运行状态进行检测,进而可基于设备的健康状态为其安排更为合理的维修方案,在降低租赁商维修费用的同时,尽量少地干预客户的正常施工,并且保证租赁设备在客户施工场所的可靠运行.本文研究了基于状态检测的租赁设备的最优维修问题,研究中引入了顺序状态检测,定义了基于状态的控制限维修策略,并建立了以维修开销最小为目标的解析模型,以决策系统最优的检测间隔和预防维修阈值.除检测、维修等基本费用外,模型中还进一步考虑了租赁系统的故障罚金和故障后维修超时罚金.在模型的求解中,推导了维修干预下设备任意时刻的检测概率和状态概率分布,作为模型构建和求解的依据.数值实验结果验证并表明了面向租赁设备的基于状态的维修策略的有效性.     

基于期刊阅读群划分的期刊服务探索——以北京青年政治学院图书馆为例

新媒体时代的到来,使图书馆传统的期刊服务面临着新的挑战。为更好地做好期刊服务,分析了期刊阅读群各自的特点,探讨了基于期刊阅读群划分的期刊服务,包括面向教学科研期刊阅读群的深层次服务、面向学生阶段性阅读群的引导型服务以及面向休闲浅阅读群的灵活性服务。     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.