浅谈新型墙体材料——煤矸石空心砖

煤矸石空心砖是一种新型环保墙体材料，符合国家及山西省出台的限制生产和使用实心黏土砖，鼓励发展新型建筑材料的政策。利用煤矸石制造的空心砖可以作为保温材料，既可节约建筑能耗，又可节约土地资源，减少环境污染。煤矸石空心砖同黏土实心砖相比，具有高强、轻质、隔音、隔热、保温、防震等优点，市场前景良好。     

生物滴滤塔净化中低浓度H2S气体的挂膜实验研究

本文通过对两种填料处理硫化氢气体的挂膜实验研究,表明挂膜方法、填料性能、温度、PH值、入口浓度等均影响挂膜效果与硫化氢去除率,并且得出陶粒挂膜启动时间比阶梯环快。     

粉煤灰烧结坯体性能试验研究

研究粉煤灰粘土坯体的成型条件、烧结温度、最大粉煤灰掺量3个方面对坯体性能的影响，得到粉煤灰砖生产的最优方案，为粉煤灰砖的实际生产提供理论依据。     

液态渣粉煤灰陶粒混凝土性能的研究

研究以液态渣取代普通砂作细集料对粉煤灰陶粒混凝土强度、弹性模量的影响，并从微观机理上分析取代后弹性模量提高的原因。     

烧结型Ag－SnO_2敏感元件的敏感特性

为了改善气敏元件的性能，人们通常采用掺杂的方式以提高其灵敏度和选择性，该文将ＳｎＯ２粉和Ａｇ粉混合研磨，制成烧结型气敏元件，实验表明其对氢、乙醇的灵敏度有显著提高．     

烧结工艺对含硅锰烧结钢性能与组织的影响

研究了烧结温度和时间对Ｆｅ－３．１Ｍｎ－１．２Ｓｉ－０．４Ｃ烧结刚性能与组织的影响，实验结果表明：提高烧结温度和延长烧结时间都能改善Ｆｅ－３．１Ｍｎ－１．２Ｓｉ－０．４Ｃ烧结钢的机械性能；并使烧结试样由膨胀逐渐向收缩过渡，Ｆｅ－３．１Ｍｎ－１．２Ｓｉ－０．４Ｃ烧结网在１１００℃以上烧结时，由于有液相的出现，合金化过程可以被大大地提高，在烧结过程中，只有那些较小的硅锰母合金颗粒才能全部熔化，而那些尺     

高强度石粉免烧免蒸砖的研制

通过正交试验设计研究了石粉免烧免蒸压砖的原料配合比、复合外加剂的类型和制备工艺对制品性能的影响.试验结果表明石粉泥浆可以替代粘土制备出15号以上的墙体砖,符合新型墙体材料的要求.     

铁基粉末烧结热锻材料的组织和性能

对比研究了两种不同成分铁基粉末烧结材料和粉末烧结热锻材料的显微组织和机械性能。结果表明，粉末烧结热锻材料综合机械性能显著高于粉末烧结材料。粉末烧结热锻材料的显微组织近似致密组织，密度可达7.60—7.70g/cm^3；表观硬度增加约50%；摩擦学特性显著提高。     

Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.     

工业废渣对海泥烧结砖泛霜程度影响的试验

研究两种不同特性工业废渣铁尾矿、粉煤灰对海泥烧结多孔砖样品泛霜程度的影响及机理.结果表明:铁尾矿减轻海泥烧结砖泛霜程度的有利因素多,粉煤灰提高海泥烧结砖泛霜程度的不利因素多.此外,掺加外加剂可以在某种程度上降低海泥烧结砖的泛霜等级;当掺量达到某一范围时,能够较大幅度减少砖坯成型用水量,烧成中产生液相的非瘠性工业废渣-铁...