轴向磁场作用下平均Taylor涡对湍流脉动的影响

采用基于高精度电流守恒格式的直接数值模拟方法，对轴向磁场作用下导电流体的湍流Taylor-Couette流动进行计算.在等电势边界条件的同心圆筒中，磁场与感生电流引起的反向周向速度分布、以及其对平均流动的影响被揭示出来.采用两种不同的湍流流场平均方法，将湍流中的全部脉动划分为平均流动(Taylor涡)的贡献和湍流的贡献.通过计算不同磁场强度下的湍动能的分布，对比分析轴向磁场对平均Taylor涡流和湍流两种贡献方式的影响.     

Processing and characterization of the microstructure and mechanical properties of Al6061–TiB2 composite

In the present research, aluminum metal matrix composites were processed by the stir casting technique. The effects of TiB2 rein-forcement particles, severe plastic deformation through accumulative roll bonding (ARB), and aging treatment on the microstructural charac-teristics and mechanical properties were also evaluated. Uniaxial tensile tests and microhardness measurements were conducted, and the micro-structural characteristics were investigated. Notably, the important problems associated with cast samples, including nonuniformity of the rein-forcement particles and high porosity content, were solved through the ARB process. At the initial stage, particle-free zones, as well as particle clusters, were observed on the microstructure of the composite. However, after the ARB process, fracturing phenomena occurred in brittle ceramic particles, followed by breaking down of the fragments into fine particles as the number of rolling cycles increased. Subsequently, com-posites with a uniform distribution of particles were produced. Moreover, the tensile strength and microhardness of the ARB-processed com-posites increased with the increase in the reinforcement mass fraction. However, their ductility exhibited a different trend. With post-deforma-tion aging treatment (T6), the mechanical properties of composites were improved because of the formation of fine Mg2Si precipitates.     

I ain’t afraid of no ghost

This paper criticizes the traditional philosophical account of the quantization of gauge theories and offers an alternative. On the received view, gauge theories resist quantization because they feature distinct mathematical representatives of the same physical state of affairs. This resistance is overcome by a sequence of ad hoc modifications, justified in part by reference to semiclassical electrodynamics. Among other things, these modifications introduce ”ghosts”: particles with unphysical properties which do not appear in asymptotic states and which are said to be purely a notational convenience. I argue that this sequence of modifications is unjustified and inadequate, making it a poor basis for the interpretation of ghosts. I then argue that gauge theories can be quantized by the same method as any other theory. On this account, ghosts are not purely notation: they are coordinates on the classical configuration space of the theory—specifically, on its gauge structure. This interpretation does not fall prey to the standard philosophical arguments against the significance of ghosts, due to Weingard. Weingard’s argumentative strategy, properly applied, in fact tells in favor of ghosts’ physical significance.     

行驶受扰延迟下配送车辆调度的干扰管理决策模型

针对行驶受扰延迟下配送车辆的调度问题,提出了基于多相量子粒子群算法的两阶段干扰管理决策方法.首先以最小化用户时间窗偏离度和最小化配送成本为目标,建立了问题的数学模型;然后对车辆配送发生干扰事件可能采取的干扰管理模式进行了归纳和分类,并在选定模式基础上提出了用多相量子粒子群算法进行路线选择的方法;最后在Solomon算例的基础上通过实验仿真,对所提出方法的性能进行测试,并与全局重调度方法进行对比分析,验证了本文方法不仅达到了优化目标的目的,还满足了干扰管理的实用性要求.     

基于改进灰狼算法的粒子滤波算法研究

针对传统粒子滤波算法易出现粒子贫化与权值退化现象和为了实现对非线性系统较为准确的状态估计,通常需要大量粒子的参与的问题,提出了基于改进灰狼算法的新型粒子滤波方法,该算法用粒子表征灰狼个体,模拟狼群捕猎的过程,使粒子向后验概率的高似然区域移动,提高粒子分布的合理性。在灰狼寻优算法中引入了莱维飞行策略,提高灰狼算法的收敛速度;在部分重采样前采用了权值自适应调整策略,增加粒子的多样性。仿真实验结果表明:改进的方法提高了粒子滤波的估计精度、保证了粒子的多样性与粒子分布的合理性、降低了状态估计所需的粒子数量。     

量子点敏化太阳能电池ZnO光阳极的制备及性能

先用水热法合成ZnO颗粒, 再用溶胶 凝胶法将ZnO颗粒制备成量子点敏化太阳能电池光阳极, 并通过X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 紫外-可见吸收光谱(UV-Vis)和光电流密度 电压曲线分析不同厚度的六方纤锌矿型ZnO光阳极对量子点敏化太阳能电池性能的影响. 结果表明, 增加量子点的吸附面积可使ZnO光阳极的UV-Vis谱吸收带边红移, 进而提升太阳能电池的光电转换效率.     

6063铝合金表面点状物的分析研究

利用金相显微镜(OM)、扫描电子显微镜(SEM)和能谱分析仪(EDS)等分析研究了6063铝合金表面点状凸起物的表面形貌及成分.结果表明,这种点状凸起物主要是由大量聚集的碳化硅颗粒以及少量的游离硅组成,碳化硅颗粒硬度较大,不易加工,从而造成铝合金表面异常.     

少控制参数的分层式骨干粒子群优化算法

针对传统粒子群优化易于早熟的缺点,提出一种少控制参数的改进骨干粒子群优化算法.该算法利用关于粒子全局和个体极值点的高斯分布更新粒子的位置,无需设置惯性权重和学习因子等控制参数;利用混沌扰动策略产生粒子的全局极值点,提高了粒子群的多样性;为改善算法的全局探索能力,依据收敛速度动态分配每个粒子的变异概率,设计了一种自适应跳离算子;为均衡算法的局部开发和全局探索能力,给出了一种分层式粒子更新公式.最后,将所提算法用于多个典型测试问题,并与三种典型算法进行对比,实验结果证明了它的有效性.     

同向双螺杆间隙对含能材料加工过程的影响研究

为研究螺杆间隙对流道中药浆的安全性能和混合效果的影响，在螺杆构型相同的情况下，设置1.2、1.6 mm和2.0 mm 3种不同的螺杆间隙，建立非等温流场模拟模型，用模拟计算得到的压力、温度和剪切应力来评价流道中药浆的安全性能，用加权平均剪切应力和累积停留时间分布来评价螺杆的分散混合和分布混合能力。结果表明：随着螺杆间隙的增大，流道中药浆的安全性提高，混合效果变差。     

基于PFC 2D的含节理岩体单轴压缩数值模拟

基于颗粒流方法模拟含节理岩体的单轴压缩破坏过程,并对不同节理倾角的岩体进行单轴压缩数值模拟,研究不同节理倾角岩体的裂纹扩展路径、破坏形式以及强度变化规律。结果表明:(1)在单轴压缩破坏过程中,岩体节理倾角不同,裂纹扩展与最终破坏形态不同,但破坏过程基本一致;(2)当节理倾角从0°到90°的变化过程中,抗压强度随节理倾角的增大先减小后增加,总体呈"U"型分布规律,并在倾角为60°时达最小值。