基于BaLuF5∶Yb3+,E3+纳米晶掺杂的聚合物光波导放大器

为提高聚合物光波导放大器的增益性能,利用高温法合成了BaLuF5∶Yb3+,Er3+纳米晶,并分别对纳米晶的形貌、晶体结构和近红外发射特性进行了表征.测试结果表明,纳米晶平均粒径为13 nm,并在1 530 nm处具有较强的发射,荧光半高宽为50 nm.将合成的纳米晶掺杂入SU-8聚合物作为光波导放大器的芯层材料,使用光刻显影等工艺,在表面长有二氧化硅的硅衬底上制备出了聚合物光波导放大器.当980 nm波长泵浦光功率为280 mW、信号光波长为1 530 nm且功率为0.1 mW时,在长度为1.1 cm的光波导放大器中,获得了3.95 dB的相对增益.     

Photocatalytic enhancement of Mg-doped ZnO nanocrystals hybridized with reduced graphene oxide sheets

Hybridization of Mg-doped ZnO and reduced graphene oxide(MZO–RGO) were synthesized through one pot reaction process. Crystallization of MZO–RGO upon thermal decomposition of the stearate precursors was investigated by X-ray diffraction technique. XRD studies point toward the particles size with 10–15 nm,which was confirmed by transmittance electronic microscopy,and also indicates that graphene oxide has been directly reduced into its reduced state graphene during the synthesis. Graphene hybridized MZO photocatalyst showed enhanced catalytic activity for the degradation of methylene blue(MB). The degree of photocatalytic activity enhancement strongly depended both on the coverage of graphene on the surface of MZO nanoparticles and the Mg doping concentration. The sample of 2 wt% graphene hybridized 5 at% Mg-doped ZnO showed the highest photocatalytic activity,which remained good photocatalytic activity after nine cycling runs.     

Polycaprolactone Grafting of Cellulose Nanocrystals in Ionic Liquid[BMIM]CI

A polycaprolactone-grafted cellulose nanocrystal(PCL-g-CN) was prepared in ionic liquid and characterized by Fourier transform infrared spectrum(FT-IR),X-ray diffraction(XRD),and transmission electron microscopy(TEM).A peak assigned to the carbonyl group appears at 1 730 cm~(-1) in the FT-IR of PCL-g-CN,which confirms that the grafting reaction is successfully completed.The morphologies of PCL-g-CNs still maintain rod-like structure according to the TEM images.XRD results show that the crystal type of the PCL-g-CNs changed from cellulose Ⅰ to cellulose Ⅱ.The reasons for crystal transition of CNs turn out to be combined effects of anion and cation in ionic liquid with CNs.     

Cu_2ZnSnS_4纳米晶的合成和表征

用乙酰丙酮铜、二水醋酸锌、氯化亚锡和高纯硫分别作为反应的铜源、锌源、锡源和硫源,油胺充当反应溶剂和活性剂,采用热注入法在不同的温度和反应时间下合成出了Cu_2ZnSnS_4纳米晶体.然后,使用X射线衍射、紫外-可见分光光度计、扫描电子显微镜和透射电子显微镜等手段分别对Cu_2ZnSnS_4纳米晶体的晶格结构、吸收谱线和表面形貌进行了表征.通过对比发现,在270℃时合成出的纳米晶体比较纯净,纳米晶体颗粒的尺寸在一定反应时间内随反应时间的延长而增大.得到的产物在有机溶剂甲苯中分散性良好.这样的"墨汁"溶液在后期制备薄膜太阳能电池更有利.     

介质研磨法制备阿奇霉素纳米晶

采用介质研磨法制备了阿奇霉素纳米晶,考察了机器转速、研磨时间、研磨珠的大小及用量、表面活性剂的种类及浓度、阿奇霉素的浓度等因素对产品粒径及多分散指数的影响.分别采用扫描电镜(SEM)、粒度测定仪、X射线粉末衍射(XRPD)、红外光谱仪(FT-IR)对纳米晶进行了分析和表征,同时对纳米晶和原料药进行了溶出性能研究.实验结果表明,在优化的条件下,可制备平均粒径为165nm的阿奇霉素纳米粒子,研磨前后药物的晶态没有明显改变;与原料药相比,纳米晶的溶出度有了显著提高.     

纳米ZnO固载辣根过氧化物酶及其降解酚类化合物研究

目的 利用纳米材料固载辣根过氧化物酶并对固载酶性质及应用进行研究.方法 运用电镜,红外光谱法表征材料,用紫外光谱法检测固载化HRP活性.结果 固载酶在碱性环境中活性比游离酶平均高40%,60℃反应体系里仍然能维持45.3%活性,保存50 d后活性为35.8%,用于降解苯酚与氯酚时去除效率分别为87.3%和65.4%.结论 实验证明了纳米ZnO能够固载辣根过氧化物酶,所得固载酶应用于降解苯酚、氯酚水溶液时催化效率比游离酶分别提高39.68%和21.56%.但是,固载化HRP的重复利用性较差,4次循环使用后基本失活.有必要进一步探索优化固载与催化条件,提高固载酶重复利用性.     

聚苯乙烯改性纤维素纳米晶体对聚甲基丙烯酸甲酯热稳定性的增强作用

采用原子转移自由基聚合(SI-ATRP)在纤维素纳米晶体(CNC)表面接枝聚苯乙烯,并利用傅里叶红外光谱(FTIR)、热重分析仪(TGA)对改性前后的纤维素纳米晶体的化学结构和热稳定性进行了研究。测试结果表明,聚苯乙烯可成功地接枝到纤维素纳米晶体的表面; 纤维素纳米晶体的热分解温度由150 ℃上升到220 ℃,改性后纤维素纳米晶体的热稳定性得到提高。采用溶液浇铸法制备聚甲基丙烯酸甲酯/纤维素纳米晶体复合材料(PMMA/CNC),并利用TGA、透光率测试对复合材料热稳定性和透光率进行了研究。结果表明,当温度达到350 ℃时,PMMA/CNC的热分解温度比纯PMMA提高了近150 ℃, CNC的加入量为1%时,复合材料的透光率为89%,接近纯PMMA的透光率(91%)。聚苯乙烯改性纤维素纳米晶体可用于在保持PMMA透明性的前提下更好地改善PMMA复合材料的热稳定性。     

溶胶-凝胶法制备二氧化钛纳米晶及其在染料敏化太阳电池中的应用

用溶胶-凝胶法制备了二氧化钛纳米晶,采用热重-差热(TG-DSC)、X射线粉末衍射(XRD)和扫描电子显微镜(SEM)等手段研究了保温时间对纳米晶的晶体结构和平均粒径的影响.结果表明:经430℃热处理得到的二氧化钛纳米晶主要表现为锐钛矿结构;随着保温时间从1h延长至3h,纳米晶的平均粒径从13.7nm增大到43.7nm.以所制二氧化钛纳米晶为光阳极材料组装了染料敏化太阳电池,并对其光电性能进行了研究,结果显示:粒径为25.4nm的二氧化钛纳米晶太阳电池表现出最佳的光电转化效率,其值为4.62%.     

Cellulose nanocrystals as green fillers to improve crystallization and hydrophilic property of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The green nanocomposites of poly(3-hydroxybutyrate-co-3-hyd roxyvalerate) (PHBV) with various cellulose nanocrystals (CNCs) contents were prepared by solution casting method. Th e effects of CNCs on the crystallization behavior, spherulitic morphology, crystal structure and hydrophilic property of PHBV were studied by differential scanning calorimeter (DSC), polarized optical microscope (POM), wide-angle X-ray diffraction (WAXD) and static water contact angle measurement. It is found that the CNCs act as an effective nucleation agent for crystallization of PHBV, inducing an increase in the melt crystallization tempera ture of the nanocomposites. A study of the non-isothermal crystallizatio n kinetics further illustrated that overall crystallization rate of PHBV in the nanocomposites was faster than that of neat PHBV, but exhibited a decrease in the crystallinity and the spherulite size of PHBV. Furthermore, the contact angle decreased from 60.1° for neat PHBV to 32.5° for the nanocomposites with 10% CNCs (mass fraction).     

铕镝离子掺杂锆酸钡纳米晶的制备及发光性质

采用溶胶-凝胶-燃烧法在700℃和较短的煅烧时间下制备了钙钛矿结构的BaZrO3纳米晶,对产物进行不同摩尔浓度的Eu3+、Dy3+掺杂,并对产物的发光性质进行了研究.结果表明:Eu3+掺杂的BaZrO3样品具有5D0→7F1(595 nm)和5D0-7F2(615 nm)的强电子吸收,且在Eu3+掺杂摩尔浓度为5%附近...