不同表面活性剂对CoSb_3纳米粉体的影响及其非晶化研究

分别选用不同的表面活性剂(SDBS、CTAB、EDTA、PVP),采用水热法成功制备CoSb_3纳米粉体.对制备的纳米粉体分别进行XRD和SEM表征,研究了不同表面活性剂对制备的CoSb_3纳米粉体的影响.结果表明不同表面活性剂对制备的CoSb_3纳米粉体形貌有显著的影响.并将水热法制备的CoSb_3纳米粉体,采用脉冲激光非晶化技术进行处理,结果表明纳米粉体实现了部分非晶化.通过样品的XRD分析研究了影响CoSb_3纳米粉体部分非晶化的条件,结果表明扫描重复次数的增加可以提高CoSb_3基方钴矿热电材料的非晶化能力,适当提高扫描速度有利于CoSb_3基方钴矿热电材料的非晶化.     

贵州山核桃ISSR-PCR反应体系建立及优化

为建立贵州山核桃ISSR-PCR最佳反应体系,采用单因素试验的方法,对影响ISSR-PCR反应体系的模板DNA浓度、MgCl2浓度、d NTPs浓度、Taq酶用量、引物浓度等各因素进行了研究,确立了贵州山核桃ISSR-PCR的最佳反应体系。结果显示:最优反应体系的模板DNA浓度为40ng/u L、引物浓度为0.3umol/L、Mg2+的浓度2.9mmol/L、酶浓度0.3U、d NTPs浓度0.2mmol/L,退火温度为54℃。建立该反应体系可为贵州山核桃ISSR标记开发、物种分类鉴定、遗传图谱构建等后续分析奠定基础。     

Key technologies for polymer electrolyte membrane fuel cell systems fueled impure hydrogen

Hydrogen energy and polymer electrolyte membrane (PEM) fuel cells become concerned issues in recent years. Nevertheless, the construction of hydrogen refueling infrastructure and hydrogen storage and transportation constrains the commercial development of fuel cells. In this review, sources, production, storage, transportation, and purification methods of hydrogen are extensively reviewed and compared. The advantages of utilizing industrial by-product hydrogen and steam reforming gas in PEM fuel cell systems are analyzed. Using industrial wasted hydrogen can significantly reduce the cost of hydrogen. Also, it is indicated that the onboard hydrogen generation by steam methanol reforming can solve the difficulties of efficient storage and transportation of gaseous hydrogen, which means that methanol has great potential to be a convenient carrier of hydrogen. The effects of impurities contained in the reformate gas are generally introduced. After the methanol steam reforming and pretreatment purification processes, the reformate gas can be fed to PEM fuel cells. Thus, a fuel cell system integrated with onboard hydrogen production and impure hydrogen treatment subsystems is introduced, and key technologies therein for pretreatment purification and in-situ poisoning mitigation methods are reviewed. Finally, suggestions are proposed for further studies.     

基于APAS的篮球技术链攻防时空特征研究

运用三维影像解析系统软件对持球顺步突破后跨步急停跳投这一技术链的攻守影像进行解析.研究结果表明,篮球技术链中每一项技术的运用都有其时间和空间适用性,如果运用得当,链内技术可以产生互为运用手段、互相创造时空条件的效果;经测试,高水平篮球运动员脚的简单反应时和动作反应时高度相关,但在持球队员运用该技术链向左侧突破时,技术链前端技术不能为末端的投篮技术创造时空优势.     

Synthesis of aluminum nitride in a coke-calcium reduction bed using nitrogen in air

An experimental study on the heating of a mixture of aluminum and lithium hydroxide (LiOH) powders in a reductive bed under air atmosphere is reported. The formation of aluminum nitride (AlN) during this process was the focus of this study. The formation of AlN was achieved using LiOH as an additive and heating the sample in a resistance furnace in a specially designed double crucible within a bed of a mixture of coke and filamentous calcium. The temperature range of the reaction was between 700°C and 1100°C. The optimum tem-perature of 1100°C and the optimum LiOH amount (5wt%) required to achieve maximum yield were determined by powder X-ray diffrac-tion (XRD) analysis. Scanning electron microscopy (SEM) micrographs clearly indicated the transformation of grain structures from rods (700°C) to cauliflower shapes (1100°C).     

单原子Co修饰TiO2(101)面的结构和析氢性能的第一性原理研究

通过基于密度泛函理论（DFT）+U的第一性原理方法研究了单原子Co在TiO₂（101）面的掺杂位置和方式、几何结构和整体能量以及掺杂后产物的制氢反应机制，得到了稳定且易出现的单原子修饰结构，即单原子Co吸附在4个O组成的表面空隙的中心位，记为Co/TiO₂（101）。进一步对Co/TiO₂（101）的析氢反应过程和性能进行研究，确定了当且仅当TiO₂（101）面完成表面羟基化反应后，H原子全覆盖的TiO₂（101）表面才能进行后续的析氢反应；此时单原子Co是唯一的反应位点，整体的制氢反应自由能ΔG_H*比Co（111）面更加趋近于0，显示出其具有远优于金属Co的催化性能。此外，Co和TiO₂间的电荷转移和相互作用使TiO₂带隙出现新的掺杂能级，可带来作为光催化基材的TiO₂光吸收性能的改善。     

FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

金属锌改性HZSM-5催化的固定床反应器中甲醇芳构化工艺条件优化研究

通过等体积浸渍法制备了Zn改性的HZSM-5催化剂,并在连续流动固定床反应器上研究了Zn-HZSM-5催化剂的甲醇芳构化性能。结合X射线衍射(XRD)、吡啶吸附傅立叶变换红外光谱(Py-IR)、N2吸附-脱附方法对金属锌改性HZSM-5催化剂进行了表征。考察了Zn负载量和操作条件对甲醇芳构化反应的影响,并针对甲醇芳构化反应过程中强放热导致催化剂床层温升过高而使催化剂结焦失活的现象,探讨了催化剂床层温度控制的影响因素。研究结果表明,锌改性HZSM-5的最佳负载量(质量分数)区间为2%~3%;2.5%Zn-HZSM-5催化的固定床反应器中甲醇芳构化的最优工艺条件为常压,400~430℃,甲醇质量空速小于2 h-1;降低甲醇水溶液中甲醇物质的量比、加大气相空速中氮气分压均能降低催化剂床层的温升。     

丙酸盐对厌氧氨氧化除氮性能及群落结构的影响

为了探究有机碳对厌氧氨氧化的长期影响, 向厌氧氨氧化膜生物反应器中添加不同浓度的丙酸钠, 研究对反应器的除氮效能以及微生物的种群结构和功能变化。结果表明: 反应器主要的脱氮过程由CandidatusBrocadia完成, 当丙酸钠浓度为100 mg/L时, 反应器中由于异养细菌的生长, 可实现碳氮的同步去除, 平均总氮去除率可达91.9%。当丙酸钠浓度为200 mg/L 时, 对Candidatus Brocadia的抑制作用导致反应器除氮性能下降, Candidatus Brocadia的丰度降至41.2%, 总氮去除率降至 78.8%。在有机碳抑制作用解除后, 反应器的除氮性能恢复为86.8%, Candidatus Brocadia丰度增加到54.0%, 但群落多样性下降, 属水平的微生物组成有较大的改变。