团簇Co3FeP异构化反应的热力学与动力学研究

为了寻找团簇Co₃FeP的稳定性、结构和内部作用力等规律，利用密度泛函理论，在B3LYP/Lanl2dz的量化水平下对团簇Co₃FeP进行理论计算，得到5种优化构型，并从化学反应热力学与动力学的角度对其异构化反应中的反应物、过渡态和生成物进行了讨论分析。结果表明，所有构型均为C1对称且构型的空间结构对其熵值有影响；构型的稳定性主要由金属原子与非金属原子所决定，并且在常温常压下构型1^（3）、2^（3）和3^（3）可以稳定存在，是大部分异构化反应的最终产物。因此，在实际材料的开发中，不仅需要注意金属原子与非金属原子之间的作用力以确保构型的稳定性，还应首先考虑对稳定构型1^（3）、2^（3）和3^（3）进行相关研究。     

The Development of Materials for the Production of Hydrogen from Bio-ethanol

1 Results There is an increased interest in the hydrogen production from renewable sources. In this context, recently, numerous studies which use ethanol for hydrogen production have appeared. Ethanol is easily handled, non-toxic, and it can be obtained from biomass. The steam-reforming of bioethanol has been shown to beeffective for hydrogen production:C2H5OH 3 H2O  6 H2 2 CO2. Six moles of hydrogen can be yielded for each mole of ethanol reacted. However, depending on the catalyst used, other und...     

Co2+离子在CsMgCl3晶体中的g因子和超精细结构常数研究

用基团模型的3d^7离子在三角对称下的高阶微扰公式计算了CsMgCl3晶体中Co^2＋杂质中心的g因子g∥,g⊥和超精细结构常数A∥和A⊥。计算中，不仅考虑了基态和激发态间的组态相互作用效应，而且考虑了3d^7离子d轨道与配体p轨道之间的共价效应，与这两种效应相关的参数可由所研究晶体的光谱和结构数据得到。在考虑了键长与键角的微弱畸变后，理论计算值与实验观测值符合较好。     

电荷掺杂和杂原子掺杂聚硅烷的比较性理论研究

本文利用GAUSSIAN 03程序包中的密度泛函理论,在B3LYP/6-31G(d)水平下,对聚21硅烷、电荷掺杂的聚21硅烷以及杂原子(硼和磷)掺杂的聚21硅烷进行几何全优化,并对它们的几何结构和自旋密度进行了比较性理论研究.结果表明,电荷掺杂能使聚硅烷的Si—Si键长增长,其极子分布几乎遍及了聚21硅烷的整个链;而杂原子(B、P)的掺杂对聚硅烷的影响主要集中在与B、P原子相邻的Si原子上,极子分布仅局域在B、P原子附近的3~5个原子上.     

Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

结构不对称杀虫剂丙硫磷复配制剂的研制与应用

测定不同配比的氟氰菊酯与丙硫磷复配制剂（简称氯丙制剂）对褐棘蛾和马尾松毛虫幼虫的触杀毒力、共毒系数和增效配比,加工成不同比例的氯丙复合乳油,对两种供试昆虫进行了防治效果检验。结果表明,以有效成分间１：７的比例配制的氯丙复剂增效明显,成本较低,具有较理想的防治效果。     

PPV导电高分子膜可充电电池的特性研究

对导电高分子—聚对苯撑乙烯基ｐｏｌｙ－（ｐａｒａ－ｐｈｅｎｙｌｅｎｅｖｉｎｙｌｅｎｅ）（简称ＰＰＶ）膜电极和锂电极所组成的超薄型可充电电池的安装及反应机理进行研究,并对此电池特性作了深入的探讨．     

Co修饰活性炭作为超级电容器的电极材料

为提高碳电容器的容量,采用Co2 真空浸渍、碱化处理的方法对活性炭电极进行了修饰.采用循环伏安、恒流充放电、寿命试验及漏电流测量等方法对Co修饰后的电极及电容器的性能进行了测试,结果表明,Co修饰后的活性炭电极的比容量比未修饰的活性炭电极提高26.8%,组成电容器后经1000次循环,电容量仍保持在91%以上,且该电容器漏电流较小.     

Co2+: CaAl2S4吸收光谱的理论解释

MgAl2Sd，CaAl2S4，CO^2 MgAl2S4和Co^2 CaAl2S4晶体是典型的三重复合半导体材料，由化学输运反应的方法可以成功制备而得出，具有宽的能隙结构，因而在光电方面有着非常重要的应用而备受广泛的关注．采用Sugano-Tallabe强场近似理论，引入平均共价因子Ⅳ，利用经典晶场能量矩阵公式，在D2对称模型下计算出的结果较好符合了实验事实，从而纠正了S．K．Oh等人对Co^2 ：CaAl2S4吸收光谱的不合理解释。     

GaAs/AlAs异型异质结导带研究

利用泊松方程分析了异质结导带形状，通过数值模拟研究了GaAs/AlAs异型异质结在不同掺杂浓度下的导带图，确定了导带尖峰出现的位置和耗尽区宽度。