Detecting myocardial ischemia with 2-D CVIB imaging method--an in vivo animal experiment study

A 2-D cyclic variation of integrated backscatter (CVIB) imaging method was established for detecting myocardial ischemia. To demonstrate the feasibility and validity of this method, animal experiments were conducted. Acute myocardial ischemia was induced by occluding left anterior descending coronary artery in 10 anesthetized open-chest dogs. While scanning the normal hearts and the ischemic hearts with a B scanner, digital radiofrequency data were acquired by a real-time acquisition system in synchronism. The offline analysis to the radio-frequency signal with the 2-D CVIB imaging method was performed to verify the consistency between the imaging result and the design of the experiment. In addition, 4 dogs in experiment were treated with the heart pacemaker in order to investigate the influence of changing in heart rate on the detection of ischemic myocardium with the proposed method. The experimental result showed that the 2-D CVIB imaging method succeeded in detecting the ischemic myocardium and is a new non-invasive way for the cardiologists to both quantitatively and visually evaluate the contractile performance of the myocardium.     

Ruin Probability with Variable Premium Rate and Disturbed by Diffusion in a Markovian Environment

We consider a risk model with a premium rate which varies with the level of free reserves. In this model, the occurrence of claims is described by a Cox process with Markov intensity process, and the influence of stochastic factors is considered by adding a diffusion process. The integro-differential equation for the ruin probability is derived by a infinitesimal method.     

冷轧压下率分配对IF钢深冲性能的影响

冷轧压下率对IF钢的深冲性能有重要的影响。采用两次冷轧，在总压下率一定的情况下，两次冷轧压下率的分配是影响IF钢深冲性能的关键。通过冷轧实验，得出在总压下率一定时，两次冷轧比一次冷轧的塑性应变比r值要高；总压下率一定，一次冷轧压下率较小，两次冷轧压下率较大时，可使r值提高；同时，冷轧总压下率提高，也可使r值提高。     

结构可靠性设计中尺寸变差系数的确定方法

提出了在结构可靠性设计中,根据现有加工条件和设计要求确定几何尺寸变差系数的思想,并给出了当已知精度等级时,直接加工尺寸和组合尺寸变差系数的计算方法和程序。采用该方法使可靠性设计更切合实际。     

排球跳发球的"质""量"分析

从跳发球的“质”“量”入手，运用生物学原理及观察、统计等方法，结合中外排球大赛的实况，对跳发球和站发球等技术在比赛实战中的效果进行对比分析．结果显示，跳发球力量大、过网点低、球速快、攻击性强、得分率高，在比赛中显示出较大的威力，我国应加强跳发球技术的推广和应用。     

四硫代钼酸铵与四硫代钨酸铵合成方法改进的研究

对钼酸铵与硫化氢反应合成四硫代钼酸铵、钨酸与硫化氢反应合成四硫代钨酸铵的方法进行了改进。结果表明，采用改进后的方法，反应时间分别为７小时和１１小时。比文献值￣［１１］缩短了许多。产率分别为９１．１％和５２．１％，均高于文献值￣［１］。     

泡沫的持液量研究

泡沫的持液量（ｈ，ｍｇ／ｃｍ３）是泡沫的基本特性之一．本文对形成泡沫的起泡剂浓度、增粘剂浓度、气体流量和温度等因素对Ｈ的影响及变化规律作了研究，并对Ｈ与泡沫表观粘度和泡沫半衰期的相互关系作了描述，对泡沫的实际应用具有一定的指导意义．     

取值于Banach空间中的（E1）囿变函数

引入取值Ｂａｎａｃｈ空间中的（Ｅ１）囿变函数的概念，并讨论它与强、弱囿变函数之间的关系．     

半导体激光器行波速率方程的研究

考虑了ＩｎＧａＡｓＰ半导体激光器的俄歇效应后，对描述稳态运行的半导体激光器的行波速率方程组进行了修正，求得了隐函形式的解析解，并以此对激光器的一些重要持性进行了讨论。