数显温控精确测量金属丝的温度系数

在传统金属导体温度系数测量中对于金属丝的加热通常采用了水浴加热法或油浸加热法。这两种方法存在着短路、产生不良气体污染、温度测量不精确等缺点。首次使用了数显温度可控的功率电阻作为金属丝的加热源,在测量中采用了双臂电桥、金属丝的四端电阻接线方式,不仅实现了金属丝的温度可控性和实时测量性,而且将测量精度提高到3%以内。     

回收碘的研究

主要介绍了磷化工厂含碘烟气中碘元素通过富集，沉淀回收的方法。对碘的回收的影响因素很多，主要讨论温度、pH值、沉淀剂的种类与碘回收的关系，并且通过实验找出最佳的工艺参数并确定经济合理、适用性广的工艺流程。     

高精度步进压印机热误差的建模分析

为了消除由紫外光曝光所引起的步进压印机的热误差，以提高压印机的套刻对准精度，运用逐步回归分析法选取了压印机上温度测量点的数量，将压印机上布置的温度传感器从15个减少到6个，并建立了压印机温度测量关键点处的温度与压头在x、z方向热误差关系的数学模型．实验结果与模型计算结果的对比分析表明，模型的热误差预测精度在x方向可以达到899／6，而在z方向可以达到939／6．应用表明，该方法是一种在压印机热误差建模中选择温度测量关键点的有效方法，可避免热误差建模过程中的变量耦合问题，从而提高了模型的精确性．     

智能化44点啤酒发酵温度巡测仪

本文将八十年代最新研制的集成温度传感器ＡＤ５９０、８０９０单片机，可编程逻辑器件ＧＡＬ－１６Ｖ８Ａ等新器件及智能化新技术，集中应用于啤酒发酵过程的温度检测。与传统人工测温相比，具有测温精度高、稳定性好、反应快、可远距离自动检测、定时打印，减轻工人劳动强度、调节啤酒发酵温度的响应速度快等特点。     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

The induction of secondary seed dormancy by oxygen deficiency in a barnyard grassEchinochloa crus-galli

At 25°C, secondary dormancy was induced in seeds ofE. crus-galli exposed for 100 days to oxygen deficiency. By contrast, hypoxia did not induce dormancy at 15°C or prevent dormancy termination at 7°C. Secondary dormancy was terminated after 2 months stratification at 7°C. Oxygen deficiency may increase the proportion of dormant seeds in the soil, and affect the dynamics of the barnyard-grass soil seed bank.We thank Miss Jitka Králová for her excellent technical assistance.     

Internal interactions within the human circadian system: the masking effect

Summary In the realm of human circadian rhythms, the masking effect is defined as the change in the course of deep body temperature induced by changes in the degree of physical activity, or by the alteration between sleep and wake. This effect is particularly obvious during internal desynchronization where the rhythms of deep body temperature, and the sleep-wake sleep-wake sleep cycle — i.e. one of the masking factors — run with different periods.Every sleep onset is accompanied by a rapid drop, and wake onset by a rapid rise in deep body temperature, each one with an overshoot of about 50% of the steady state variations. When rhythms are calculated, with the dominant temperature period as the screening period, exclusively from data obtained during sleep episodes, on the one hand, and from those obtained exclusively during wake, on the other, two average cycles emerge: the sleep temperature curve and the wake temperature curve. Both run in parallel but are separated by the masking effcct. As derived from many experiments, the mean masking effect amounts to 0.28±0.06°C. The masking effect also depends to some extent on the phase of the temperature rhtthm; it is larger than average around the temperature maximum and during the descending phase of the temperature cycle, where the alertness commonly is highest and the probability to sleep, in general, and the REM sleep propensity, in particular, are smaller than average. This also can be interpreted to indicate that the sleep temperature curve is phase advanced relative to the wake temperature curve; this, on the average, by 0.9±0.3 h.If the individually determined amount of masking is added to the temperature data obtained during sleep, or substracted from the temperature data obtained during wake, a temperature curve emerges that can be though of as being purified of the masking effect. Analyses of this artificial curve allow estimation of that part of the internal interactions uninfluenced by the masking effect. On the average, about half of the amount of interaction between the rhythm of sleep-wake and that of deep body temperature is explained by the masking effect, whereas the other half is oscillatory interaction. Both types of interaction are inherent and inseparable parts of the circadian clock mechanism, as can be deduced from model considerations.     

钢坯磨削温度的若干试验研究

通过使用“可磨式”人工热电偶进行的不同条件下的磨削温度测量试验研究了钢坯磨削工件表层温度,结果表明钢坯被磨削表层温度分布与热强呈三角形分布时的理论分析结果相同,表层峰值温度随磨削压力及磨削功率增大而提高,且随工件进给速度提高而略有降低,峰值温度还随磨削角度减小而提高,90°磨削的峰值温度比0°磨削要低250℃左右,砂轮种类也对峰值温度有重要影响,使用锆刚玉砂轮时磨削温度低于棕刚玉砂轮,试验结果表明高效钢坯磨削的磨削区温度远比普通磨削为高,可达1200℃左右,还从不同方面探讨了磨削高温对钢坯磨削的影响,认为尽管磨削高温有若干不利影响,但对高效钢坯磨削却是重要条件,上述讨论,从一个方面揭示了钢坯磨削机理,并验证了关于钢坯磨削温度的理论分析结果。     

Photoperiodic summation is temperature-dependent inPyrrhocoris apterus (L.) (Heteroptera)

Summary InPyrrhocoris apterus, a low temperature, 15°C, prevented the termination of diapause by long days and, unexpectedly, also the induction of diapause by short days. Both responses were enabled at a higher temperature, 26°C. In contrast to current concepts, it was proved that the summation of photoperiodic signals was temperature-dependent, since the morphogenetic development was prevented by starvation.     

涂层对热电偶热电性能及大气中寿命的影响

在难熔金属热电偶表而施加涂层的目的,旨在使原仅限和真空、中性及还原气氛中测量的热电偶能在大气中使用.本文讨论涂层对难熔金属热电偶在氧化气氛的"热电势—温度","热电势—时间"的关系及其寿命的影响.具有涂层的W/M.热电偶在氧化气氛(常压下1500℃取得263小时±1%t的最高记录,而W-Re热电偶存1500℃试验的前70小时偏差也在1%t内.而没有涂层的热电偶仅支持数分钟便破坏.