锰酸锂动力锂离子二次电池中主要化学元素的回收研究

介绍了锰酸锂废旧锂离子电池经放电处理后,再对其进行拆解→活性物质剥离→酸溶→沉淀回收Mn、Li等工艺处理,有效地回收了其中的锰和锂。实验结果表明:用2mol·L-1的HNO3 1mol·L-1的H2O2体系,在固液比为65g·L-1的情况下对经过600℃处理的锰酸锂进行酸溶效果最佳,LiMn2O4的溶解率为100%,锰的回收率达98%,所得Li2CO3沉淀纯度可达97%以上。     

Fluoro-Compounds in Electrolytes for Energy Storage Devices

1 Results Electrochemical energy storage devices such as lithium-ion batteries[1-2] and double-layer capacitors[3-4] have attracted a great deal of attention because of their potential application to electric hybrid vehicles. They utilize nonaqueous electrolyte solutions comprising from organic solvents and lithium or quaternary ammonium salts with fluorine-containing anions. This is because the relatively large anions with electron-withdrawing atoms enable ionic dissociation in dipolar aprotic solvents...     

起动用铅酸蓄电池试验需注意的几个问题

本文主要讨论了起动用铅酸蓄电池试验时的几个注意点以及对检验结果造成的影响。     

电动汽车动力蓄电池快速充电关键技术探究

以动力蓄电池为能源的电动汽车被认为是２１世纪的绿色工程,而快速充电技术是电动汽车推广的一个关键．本文深入分析了铅酸蓄电池的微观与宏观充电特性,在一个蓄电池的四阶动态模型的基础上,提出了一种能够按马斯定律对蓄电池快速无伤害充电的智能充电算法．并提出了模型的动态修正和充电电流在线实时调整的方法     

掺杂LaNiO3型双功能氧电极的研究--溶胶-凝胶制备方法

为了得到高性能的双效氧电极，研究了钙钛矿型掺杂LaNiO3电催化剂的溶胶-凝胶制备方法，通过热重-差热分析、红外分析、XRD分析以及催化剂的粒径分布分析等手段，探讨了pH值、柠檬酸用量以及焙烧制度对催化剂制备的影响。结果表明，制备LaNiO3的溶胶-凝胶法的最佳工艺条件是：柠檬酸的用量为金属离子总物质的量的1．5倍；pH值调节为9；焙烧制度为在750℃下焙烧2h。     

再生铅低锑合金的工艺及应用

提出了精炼净化再生铅的工艺及原理，经处理过的再生铅可以用来配制蓄电池用低锑合金。对高锑合金、普通低锑合金、再生铅低锑合金进行了对比试验与讨论。结果表明再生铅低锑合金充分利用了Ｓｂ、Ｃｕ、Ｂｉ等有用元素，具有较好的铸造性能、耐蚀性能、抗拉强度及电性能，且成本较低。     

锂电池复合型聚合物电解质材料研究进展

综述了近年来国内外在锂离子电池复合型固态聚合物电解质和复合型凝胶聚合物电解质材料的研究进展。     

锂离子电池用无纺布支撑聚合物复合膜的制备

采用γ射线辐射接枝的方法在无纺布纤维表面接枝苯乙烯。将接枝改性后的无纺布浸渍于丁酮/PVDF-HFP/丁醇混合液中,真空干燥后制得多孔的无纺布支撑聚合物电解质复合膜。以其为隔膜组装了聚合物锂离子电池(LiMn2O4/无纺布聚合物复合膜/Li),进行充放电测试。研究结果表明,无纺布聚合物复合膜具有合适的厚度,一定的机械强度。辐射接枝提高了无纺布与聚合物混合液的结合力,在电池的充放电循环过程中不易发生短路,电池的容量和循环性能得到显著提高。     

Preparation and properties of antimony thin film anode materials

Metallic antimony thin films were deposited by magnetron sputtering and electrodeposition. Electrochemical properties of the thin film as anode materials for lithium-ion batteries were investigated and compared with those of antimony powder. It was found that both magnetron sputtering and electrodeposition are easily controllable processes to deposit antimony films with flat charge/discharge potential plateaus. The electrochemical performances of antimony thin films, especially those prepared with magnetron sputtering, are better than those of antimony powder. The reversible capacities of the magnetron sputtered antimony thin film are above 400 mA h g^-1 in the first 15 cycles.     

MgFeSiO_4 prepared via a molten salt method as a new cathode material for rechargeable magnesium batteries

Well-crystallized MgFeSiO4 microparticles were synthesized at different temperatures by a simple molten salt method using KCl flux. As a new cathode for rechargeable magnesium batteries,the material shows a reversible Mg2+ intercalation-deintercalation process. In 0.25 mol/L Mg(AlCl2EtBu) 2/THF electrolyte,MgFeSiO4 synthesized at 900°C can deliver a 125.1 mAh/g initial dis-charge capacity and a 91.4% capacity retention on the 20th cycle at a rate of 0.1C(about 15.6 mA/g) . The results show that MgFeSiO4 cou...