半导体单晶硅的离子束蚀刻实验研究

离子束蚀刻是一种有超精细加工能力的微细加工技术,广泛应用于微电子、光子技术、表面科学等领域。硅及其化合物常用来制作大规模集成电路,在其表面蚀刻出具有一定几何布图尺寸的沟槽。其深度、宽度、边壁倾角及槽底形状等直接影响器件的性能。     

NiTi合金表面氧化对镍离子释放的影响

采用原子吸收分光光度计,分别测试经机械抛光和高温氧化后的NiTi合金样品在人体生理模拟液中镍离子的释放速度,结果表明NiTi合金表面氧化膜的形成可以有效地减少镍离子的溶出.     

连铸坯液芯轧制的模拟实验与计算

对连铸方坯带液芯轧制的工艺进行了计算机模拟实验的分析，指出了方坯带液芯轧制时的变形特点、应力、应变的变化趋势，以及液芯率的大小对轧制能耗和应力、应变及变形规律的影响．在有液芯存在时，轧件的上下表面向内凹陷，侧面易于形成单鼓变形，并且随液芯率的增大而增大；同时由于静不定的作用引起轧件角部的旋转．加上变形的作用，将导致边部应力大大增加，其表现出来的变化是先减小而后增大的趋势．     

INFLUENCE OF POLYMER CHARACTERISTICS AND MELT-SPINNING CONDITIONS ON THE PRODUCTION OF HIGH RANDOMNESS 60PHB/PET THERMOTROPIC LIQUID CRYSTAL COPOLYESTER FIBER

Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible 'H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2~ 10 s~(-1)), higher temperature melting (300℃ ), lower temperature spinning (280℃ ) and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.     

泡沫的持液量研究

泡沫的持液量（ｈ，ｍｇ／ｃｍ３）是泡沫的基本特性之一．本文对形成泡沫的起泡剂浓度、增粘剂浓度、气体流量和温度等因素对Ｈ的影响及变化规律作了研究，并对Ｈ与泡沫表观粘度和泡沫半衰期的相互关系作了描述，对泡沫的实际应用具有一定的指导意义．     

Abnormal dielectric characteristics of PMN-32%PT single crystal under dc bias

It has been reported that the single crystal of relaxor ferroelectrics (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-xPT) with the compositions near the morphotropic phase boundary (MPB, 0.28相似文献   

NSRL-XAFS光束线弧矢聚焦双晶单色器设计

针对XAFS光束线能量动态扫描的实验特点，介绍了弧矢聚焦双晶单色器的物理设计：包括晶体光学结构、性能参数计算、晶体热载分析和弧矢弯曲原理．弧矢缩比选择为1：4．88，水平接收角由原来的1mrad拓宽到3mrad，在不改变基本配置的情况下，获得了样品上束癍缩小、光子通量高达半个量级以上的增益．     

萃取浮选光度法测定微量钼的研究及应用

研究了用甲苯萃取浮选Mo(Ⅴ)—SCN~-—Kφ三元络合物的各种条件。在硫酸介质中,紫红色络合物最大吸收波长位于585nm,摩尔吸光系数为2.8×10~5l·mol~(-1)·cm~(-1),钼量在0—10μg/25ml范围内符合比耳定律。大量常见元素均不干扰,40倍的钨(Ⅵ)亦不干扰钼的测定,方法已应用于钨矿中微量钼的测定,其结果令人满意。     

硼铁矿高炉冶炼过程中铀的物化行为

硼铁矿中含有微量铀，采用液态核乳胶照相，铀的价态分析，Ｘ射线衍射分析，电子探针等手段，测定了矿石中的铀以晶质铀矿物形成存在。矿石经高炉冶炼大部分ＵＯ３被还原成ＵＯ２在渣中富集，渣中的铀仍以晶质铀矿物形式存在。铀与其它矿物镶嵌关系及颗粒度大小均发生了变化。     

Experimental Observables on Nuclear Liquid Gas Phase Transition

Progress on nuclear liquid gas phase transition （LGPT） or critical behavior has been simply reviewed and some signals of LGPT in heavy ion collisions, especially in NIMROD data, are focused. These signals include the power-law charge distribution, the largest fluctuation of the fragment observables, the nuclear Zipf law, caloric curve and critical exponent analysis etc.