窄带滤光片精确波长激光器高频调制特性研究

采用窄带滤光片作为选频元件对精确波长激光器高频调制特性进行了小信号分析.优化设计了外腔长度,兼顾了激光器的阈值特性和工作稳定性;给出了适用于外腔情况的光子寿命表达式;讨论了外腔反射率、管芯与外腔耦合效率以及外腔长度对光子寿命的影响.数值分析结果表明该类型激光器的调制响应特性主要取决于等效光子寿命,受偏置电流影响不大.当外腔反射率为72%,管芯与外腔耦合效率为80%,等效外腔长度为9.7 mm时,光子寿命为100 ps,激光器的调制带宽约为2 GHz,适合于以太网无源光网络中波分多址技术应用的需要.     

光接收机调谐前端的分析

为了设计高性能的谐振式光接收机，应用场效应管模型和多种调谐网络的拓扑形式，提出了一个统一的光接收机调谐前端分析方法。推导出了对多种调谐网络通用的计算公式，用以计算谐振频率、传输函数和等效输入噪声电流密度，便于应用计算机优化光接收机的电路拓扑形式。使用该方法，编制计算机辅助程序模拟了各种不同型式的电感谐振式光接收机的特性，对于光接收机前端设计具有指导作用。     

Analyzing Nonstationary Random Response of a SDOF System under the Evolutionary Random Excitation by Wavelet Transform

For evolutionary random excitations, a general method of analyzing nonstationary random responses of systems was presented in this paper. Firstly, for the evolutionary random excitation model, the evolutionary power spectrum density function （EPSD） of a random excitation was given by wavelet transform. Based on the EPSD, the nonstationary responses of a SDOF system subjected to evolutionary random excitations were studied. The application and validity of presented method were illustrated by numerical examples. In numerical examples, the recently developed stochastic models for El Centro （1934） and Mexico City （1985） earthquakes which preserve the nonstationary evolutions of amplitude and frequency content of ground accelerations were used as excitations. The nonstationary random mean-square responses of a SDOF system under these two excitations were evaluated and compared with simulated results.     

基于去冲激响应的UWB雷达目标识别

提出了基于去冲激响应的UWB雷达目标识别方法，在理论上对该识别方法进行了详细地推导，并给出了该方法中所用到的窄脉冲的选取准则；最后，通过计算机模拟，给出了两种飞机模型不同姿态下的近似冲激响应数学模型，在此基础上对这两种飞机模型进行了识别仿真。从仿真结果来看，此识别方法效果良好。     

Optimization of Multi-Criteria Experiments with Fuzzy Results

Introduction To reach a best quality product, experiments and an op- timized design of experiments are required in an inte- grated quality management system. The best quality level of a manufacturing process or product is defined not only by one, but by m…     

Synthesis and photocurrent response of porphyrin-containing conjugated polymers

In recent years conjugated polymers have attracted considerable attention because of their potential appli- cations in the fields of light emitting diodes, photo- voltaic devices, and sensors[1―7]. In the fabrication of semiconductor photovoltaic devices…     

Climate change and hydrologic process response in the Tarim River Basin over the past 50 years

Climate change and hydrologic process response in the Tarim River Basin over the past 50 years are the focus of more and more researchers＇ attention. In this paper, both temperature and precipitation time series were found to present a monotonic increasing trend using nonparametric tests. Noticeably, a significant step change in both temperature and precipitation time series occurred in 1986. By contrasting the trends of natural water process in headstream and mainstream, we found that it was anthropogenic activities not climate change that caused the river dried up and vegetation degenerated in the lower reaches of Tarim River. The results of gray correlation analysis show that the runoff of higher latitude distributing river is more closely associated with winter snow stocking, while that of lower latitude is more closely related to summer temperature. Runoff in the headstream is more sensitive to precipitation, while that in the mainstream is more sensitive to evaporation. The strong evaporation caused by increasing temperature weakened runoff to some extent in spite of the fact that precipitation increased over the past 50 years.     

共射-共基电路的高频响应

频率响应是放大电路的一个重要参数，也是选择电路组态的一个重要依据．该文对常用的共射-共基放大电路进行了高频响应的详细分析，给出了此电路的上限截止频率与共基放大电路上限截止频率的关系，并分析了此电路的特点．     

自适应无限冲激响应陷波器抑制窄带干扰的误差补偿算法

考虑到直接序列扩频(DS-SS)系统中无限深度格型陷波器在去除窄带干扰的同时对扩频信号的损伤,在无限深度格型陷波器上添加一自适应横向滤波器,其输出作为对受损扩频信号的误差补偿.仿真结果证实,新设计的误差补偿滤波器改善了无限深度格型陷波器的性能,而系统计算复杂度只有少量增加.     

网格中数据并行流水线的任务指派优化

为了缩短网格中数据并行流水线在吞吐率受限下的延迟,提出了一种优化任务指派的算法.在一个流水线中,每个任务都可以是一个数据并行程序.当多个任务被指派到同一个并行系统时,假设每个任务排他地使用一组处理机.根据优化目的,优化过程可分成连续的两个阶段,即提高吞吐率和缩短吞吐率受限下的延迟.对不同的优化阶段,用不同的启发式算法确定一个并行系统中每个任务的处理机数.改派任一任务都会使流水线的性能发生变化,性能提高的幅度被称为任务优先级.通过重复改派优先级最高的任务,流水线的性能可迅速提高,这在仿真实验中已得到了证实.