Preparation and properties of antimony thin film anode materials

Metallic antimony thin films were deposited by magnetron sputtering and electrodeposition. Electrochemical properties of the thin film as anode materials for lithium-ion batteries were investigated and compared with those of antimony powder. It was found that both magnetron sputtering and electrodeposition are easily controllable processes to deposit antimony films with flat charge/discharge potential plateaus. The electrochemical performances of antimony thin films, especially those prepared with magnetron sputtering, are better than those of antimony powder. The reversible capacities of the magnetron sputtered antimony thin film are above 400 mA h g^-1 in the first 15 cycles.     

中间相沥青基介孔炭的表征及其用作锂离子电池负极材料的电化学性能

以中间相沥青为碳源、CaCO_3为模板,制备中间相沥青基介孔炭(MPMC)。采用XRD、SEM、TEM等手段表征所制介孔炭的结构和形貌,并将其用作锂离子电池的负极材料,测试电化学性能。结果表明,所制MPMC具有丰富的介孔结构和较大的比表面积及孔体积,随着CaCO_3质量分数的增加,MPMC的比表面积和孔体积先增加后减小,当CaCO_3的质量分数为70%时,所制MPMC的比表面积和孔体积最大;MPMC用作锂离子电池负极材料具有良好的电化学性能,能有效提高锂离子电池的可逆比容量,具有良好的循环稳定性和倍率性能。     

粘结剂对石墨电极的制备及影响

采用循环伏安法研究了醋酸纤维素、丙基甲基纤维素(HPMC)、壳聚糖3种粘结剂对石墨电极性能的影响.结果表明,壳聚糖为粘结剂制备的石墨电极的性能最好,该电极在1mmol/L亚铁氰化钾溶液和1mmol/L的对苯二酚溶液中的氧化还原峰的对称性和可逆性均较好,其氧化峰电流与扫描速度υ1/2成线性关系,表明电极表面的氧化还原过程受扩散过程控制.     

基于高通量测序技术的阳极生物膜群落结构

利用高通量测序技术对阳极生物膜的微生物群落结构进行了分析.实验结果表明,高通量测序能够高效地获取电化学生物膜的群落结构信息,产电模式菌Geobacter属在生物膜中占据着优势地位,其数量比例达到30%左右,其次的主要菌属为Thermovirga,Thauera和Syntrophorhabdus.对比电化学活性丧失前后的生物膜发现,虽然Geobacter菌属在丧失了电化学活性的生物膜中仍然占据统治地位,但是放线菌门的细菌增长显著,其数量比例远高于正常阳极生物膜的0.5%,有可能是抑制生物膜电化学活性的因素之一.     

聚苯胺修饰石墨烯纳米片的分散行为

针对氧化石墨(GO)用化学方法还原为石墨烯纳米片(GN)后极易再配列为类似石墨结构层状物的问题,本工作在GO还原过程中用聚苯胺(PANI)修饰石墨烯纳米片(P-GN),发现即使干燥后,P-GN仍可在N,N-二甲基甲酰胺(DMF)中呈分散状态稳定存在.     

重新堆积和钴离子掺杂的MoS2负极材料的合成与性能研究

以原料MoS2为前驱体,经正丁基锂剥离和水热处理,制备出重新堆积的MoS2和钴离子掺杂的MoS2.利用XRD、TEM、SEM和EDS等分析手段对样品的形貌和化学组成进行表征.结果表明:重新堆积的MoS2和钴离子掺杂的MoS2的晶型均为2H-MoS2,但结晶度都比原料的差.重新堆积的样品的组成仍为MoS2,Co2+掺杂的...     

Low temperature synthesis of NiO/Co3O4 composite nanosheets as high performance Li-ion battery anode materials

NiO/Co3O4 composite nanosheets have been synthesized via a facile method at low temperature for the first time.The as prepared materials were characterized by X-ray powder diffraction(XRD) and transmission electron microscopy(TEM),and the performance of Li-ion batteries(LIBs) as anode materials were also studied.By controlling the atom ratio of Ni:Co,not only the size of the nanosheets can be controlled,the electrode’s conductivity and stability could also be greatly improved.The composite material showed a stable capacity retention during cycling(87% of the second capacity was retained after 15 cycles) even at a relatively large current rate(400 mA/g).The NiO/Co3O4 nanosheet might be promising candidate anode materials in high performance Li-ion batteries.     

Mechanochemical synthesis and high-capacity performances of transition-metal borides as aqueous anode materials

Transition-metal borides MB0.5(M = Co,Mo,V) were synthesized by high-speed mechanical ball-milling of the corresponding elemental metals and boron,and investigated as aqueous anode materials.The as-synthesized borides can achieve an excellent discharge capacity,about twice that of their parent transition metals.The metal boride electrodes also exhibit polarizations about 100-300 mV lower than those of their parent metals.The galvanostatic discharge curve of CoB0.5 shows a single discharge voltage plateau as a result of simultaneous electro-oxidation of elemental cobalt and/or amorphous cobalt boride.Both MoB0.5 and VB0.5 show two well-defined voltage plateaus,corresponding to the electro-oxidation of the corresponding metal and boride.These results show that the coexisting transition metal and boride in the metal borides co-activate each other in the ball-milling process,thereby significantly enhancing their electrochemical performances.     

接镉作业人员发镉的石墨炉原子吸收法测定

用石墨炉原子吸收法测定了从事镉化工、镉熔炼作业人员的发镉，证实其污染严重，含量达９．３～２５．２μｇ／ｇ，为正常人的１００～４００倍。样品用ＨＮＯ３和ＨＣｌＯ４消解；加１％ＮＨ４Ｈ２ＰＯ４以改进基体，更好地进行灰化；用加钙标准曲线修正基体干扰。以此法测定人发标准样ＢＢＷ０９１０１，测定值为０．０９８±０．００４，与标准值０．０９５±０．０１２μｇ／ｇ相符，误差＜４％。     

一种新型铸造用砂──无定形石墨砂特性研究

研究了天然无定形石墨砂的化学组成、耐碾性、通氧和缺氧条件下的氧化特性，同时研究了水分及粘土含量对石墨砂型湿压强度和透气性的影响。结果表明，无定形石墨砂具有良好的耐碾性及抗氧化特性，是一种具有实用价值的新型铸造用砂。