Influence of B,Al and Nb addition on the glass forming ability and stability of mechanically alloyed Zr-Ni amorphous alloys

We investigated the influence of minor additions of B,Al and Nb that have representative atomic sizes on the glass forming ability (GFA) and stability of Zr-Ni amorphous alloys during mechanical alloying. The results show that the minor addition of B,Al or Nb does not shorten the initial time of the full amorphization reaction or improve the glass forming ability of the Zr-Ni alloys at a low rotation speed. However,B addition can effectively improve the mechanical stability of the amorphous phase against me...     

Rolling-induced microstructure change in Zr_(65)Al_(7.5)Ni_(10)Cu_(12.5)Ag_5 bulk metallic glass

The microstructures and free-volume evolutions of as-cast and pre-annealed Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glasses during rolling deformation have been investigated. No phase transformation is detected in the as-cast/rolled specimen. However,the structural stability of the glass against plastic deformation is worse after pre-annealing,indicated by nanocrystallization in preannealed/rolled specimens with large deformation degrees. Moreover,with increasing deformation degree,the free-volume content in a ...     

Rolling-induced microstructure change in Zr_（65）Al_（7.5）Ni_（10）Cu_（12.5）Ag_5 bulk metallic glass

The microstructures and free-volume evolutions of as-cast and pre-annealed Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glasses during rolling deformation have been investigated. No phase transformation is detected in the as-cast/rolled specimen. However,the structural stability of the glass against plastic deformation is worse after pre-annealing,indicated by nanocrystallization in preannealed/rolled specimens with large deformation degrees. Moreover,with increasing deformation degree,the free-volume content in a pre-annealed/rolled specimen increases at a lower average rate than that in an as-cast/rolled specimen.     

点支式玻璃建筑中铸铝支承件承载性能

为了研究点支式玻璃建筑中铸铝支承件的承载性能,对3种典型铸铝支承件进行了足尺模型试验研究。按照实际工程中支承件的形式与尺寸制造模具,采用ZL105-T1和ZL111-T6这种铝合金材料铸造成足尺模型试件,借助万能试验机对试件进行加载试验,得出了试件的屈服荷载与极限荷载。根据试件的实际几何尺寸与材料属性,建立有限元模型对试验过程进行数值模拟。有限元分析结果与试验数据吻合良好,验证了有限元模型的可靠性。试验研究与有限元分析表明铸铝支承件的承载力较高,可以在实际工程中应用。     

深基坑出碴方案比选

深基坑出碴在一些情况下会成为制约工期的关键因素,尤其是复杂地形条件下,在首先满足工期的前提下,还要综合考虑现有机械情况、技术条件和经济效益以及其他作业干扰,这使得深基坑出碴变得更加复杂。文章通过准朔铁路黄河特大桥工程特点,对几种深基坑出碴方案进行了分析对比,综合考虑后选择了履带吊出碴方案。     

Effect of Ni addition on the glass-forming ability and soft-magnetic properties of FeNiBPNb metallic glasses

The effect of Ni addition on the glass-forming ability (GFA) and soft-magnetic properties of an (Fe1-xNix)75.5B14.5P7Nb3 (x=0-0.6) alloy system were investigated. We found that the addition of Ni was effective in allowing the alloy to approach a eutectic point as well as increasing the thermal stability of the supercooled liquid. By increasing the amount of Ni,the supercooled liquid region (ΔTx),the reduced glass transition temperature Trg (Tg/Tl) and the Y parameter [Tx/(Tg+Tl)] increased from 49 to 75 K,0...     

微磨具磨削钠钙玻璃的磨损机理实验研究

建立了微磨削过程中单颗磨粒的磨损数学模型,通过观测微磨具磨削前后直径变化、表面形貌变化及加工前后试件的表面质量,分析了微磨削过程中不同阶段磨粒的磨损情况.利用粒度500~#微磨具对钠钙玻璃进行单因素磨损实验,研究不同的磨削影响因素对微磨具磨损的影响规律.实验结果表明:随着磨削速度和进给速度增大,磨粒的磨损和破碎现象加剧;随着去除材料体积的增加,微磨具直径先是急剧减小,而后呈线性减小趋势;加工表面的粗糙度随着去除工件体积的增加总体呈下降趋势.研究结果为提高微磨具的使用寿命和加工性能提供了理论参考和实验依据.     

玻璃结构的几种研究方法

介绍了玻璃的物理性能（热膨胀性能、密度、玻璃转化温度和软化温度、玻璃的化学稳定性）在玻璃结构研究中的应用,概述了如何使用现代测试手段（核磁共振、X射线吸收精细结构谱、红外-拉曼光谱、X光电子能谱、X射线衍射分析）获取玻璃结构的一些参数。     

TiO2对粉煤灰及石英砂制备微晶玻璃组织转变的影响

利用粉煤灰与石英砂制备微晶玻璃，并对其进行不同工艺的热处理．通过对热处理后的试样研究发现：当粉煤灰质量分数为30％，未加TiO2时，试样在780℃加热时首先析出过渡相Ca2SiO。，在随后的高温晶化过程中，过渡相溶解消失，析出更稳定的平衡相钙长石；当TiO2质量分数为0—15％时，随着TiO2含量的增加，在780℃加热时由析出梭形的Ca2SiO。微晶转变为析出粒状的钙长石微晶；当粉煤灰质量分数增加到40％，TiO2质量分数为3．5％时试样中出现网状微晶组织，而加入的形核剂TiO2质量分数达到5％时试样中无网状微晶组织出现，说明TiO2对网状组织的析出具有明显抑制作用．     

Atomic packing and short-to-medium range order evolution of Zr-Pd metallic glass

A larger-scale Zr₇₀Pd₃₀ alloy system has been simulated using molecular dynamics (MD) to investigate structure evolution in Zr₇₀Pd₃₀ metallic glass. The simulated pair distribution function of Zr₇₀Pd₃₀ metallic glass agrees well with the experimental results. Voronoi polyhedron analysis indicates that the icosahedra are not randomly distributed in space, but form characteristic intercrossed icosahedral clusters with medium-range order. Intercrossed icosahedral clusters are the dominant local configurations in Zr₇₀Pd₃₀ metallic glass and probably cause the quasicrystalline phase discovered in Zr₇₀Pd₃₀ metallic glass.