反相乳液聚合法合成聚丙烯酸铵的研究

以煤油为连续相,水为分散相,氨水中和的丙烯酸为单体,采用Span-80类复配乳化剂,以(NH42)S2O8为引发剂,用反相乳液聚合法合成新型絮凝剂聚丙烯酸铵.研究了乳化剂种类及用量、引发剂种类及用量p、H值、单体浓度、油相种类及用量、反应温度等因素对产物性能的影响,利用FTIR对产品进行了表征,确定了最佳实验条件。     

Na2SO3/H2O体系引发MMA聚合

实现了亚硫酸钠水溶液可以引发甲基丙烯酸甲酯(MMA)的聚合,并进一步研究了各种因素对聚合速率和聚合物分子量的影响.结果表明:亚硫酸钠水溶液可以有效引发甲基丙烯酸甲酯聚合;聚合动力学方程为Rp=kp[MMA]1.6[Na2SO3]0.44,聚合反应的总的活化能为81.7kJ/mol,所得到的聚合物分子量可达1.36x105,单体转化率高达86.7%.初步讨论了该引发体系可能的机理.     

Enolate chelating N-heterocyclic carbene complexes of Fe(II): Synthesis, structure and their catalytic activity for ring-opening polymerization of ε-caprolactone

The reaction of anhydrous FeBr2 with two equivalents of anionic N-heterocyclic carbene (NaL1 and NaL2), which are generated in situ by the reaction of the corresponding salt [4-R-C6H4COCH2{CH- (NCHCHNiPr)}Br] (R = OCH3, H2L1Br, 1; R = F, H2L2Br, 2) with two equivalents of NaN(SiMe3)2, affords bis-ligand Fe(II) complexes of L12Fe (3) and L22Fe (4) in high yield, respectively. Attempt to synthesize mono-ligand Fe(II) bromide by the 1:1 molar ratio of NaL to FeBr2 is unsuccessful, and the same com- plexes of 3 and 4 were obtained. Both 3 and 4 have been depicted by elemental analysis and X-ray structure determination. Preliminary studies show that both 3 and 4 can be used as single-component catalyst for the ring-opening polymerization of ε-caprolactone, and the catalytic activity of 3 is higher than that of 4.     

Design and Application of Novel Dispersants for Coatings and Other System

1 Results Dispersants are defined as liquids or gases that can be added to a mixture to promote dispersion or to maintain dispersed particles in suspension. A good dispersant not only helps to provide good dispersion, but also good performance, stability and rheological properties. Therefore, dispersants are widely used in many applications such as coating, ink, electronic materials, plastics, and so on[1]. There are different ways to categorize the many dispersants available on the market. From a molec...     

光接枝聚合制备双极膜的影响因素研究

以丙烯酸(AA)为接枝单体,二苯甲酮(BP)为主引发剂,二乙烯基苯(DVB)、新戊二醇二丙烯酸酯(NPGDA)为交联剂,在均相阴离子交换膜表面,通过光接枝聚合得到聚丙烯酸型阳离子交换层,形成单片型双极膜结构.考察了光照时间、交联剂用量、引发剂浓度等对光接枝聚合反应的影响.不加交联剂时,单纯以BP为引发剂,接枝程度随反应时间延长而增加,但接枝程度低;交联剂的加入可明显的提高接枝程度,在反应时间为60s左右,接枝程度最大;NPGDA做交联剂时,接枝程度高于二乙烯基苯;以2,4,6-三甲苯甲酰基-二苯基氧化膦(TPO)为共引发剂,NPGDA用量为单体量的2.5%时,接枝程度最高,为30.1%.采用均聚型引发剂与接枝型引发剂(BP)复配,可提高接枝程度,但在浓度相同时接枝程度最低.     

Preparation of polypropylene/montmorillonite nanocomposites by intercalative polymerization： Effect of in situ polymer matrix functionalization on the stability of the nanocomposite structure

The copolymerization of propylene and 5-hexenyl-9-borabicyclo[3.3.1]nonane (5-hexenyl-9-BBN) has been conducted with an MgCl2/TiCl4 catalyst intercalated in an organically modified montmorillonite (OMMT) with triethylaluminum (AlEt3) cocatalyst and diphenyldimethoxysilane (DDS) external donor. This polymerization process simultaneously results in both the exfoliation of MMT layers to realize the preparation of polypropylene (PP)/MMT nanocomposites and the implantation of reactive borane groups in the formed PP matrix. The polymer-borne borane groups have been able to undergo an effi-cient hydrolysis process under very mild reaction conditions (40℃, 3 h, in THF), introducing hydroxy groups into PP without sacrificing the polymerization-formed nanocomposite structure (the exfoliation of MMT). The resultant hydroxyl-functionalized PP/MMT nanocomposites exhibit enhanced structural stability against processing compared with those based on unfunctionalized PP matrix.     

Investigation of adsorption of surfactant at the air-water interface with quantum chemistry method

Density functional theory （DFT） of quantum chemistry was used to optimize the configuration of the anionic surfactant complexes CH3（CH2）7OSO3^- （H2O）n （n=0-6） and calculate their molecular frequencies at the B3LYP/6-311＋G^＊ level. The interaction of CH3（CH2）7OSO3^- with 1 to 6 water molecules was investigated at the air-water interface with DFT. The results revealed that the hydration shell was formed in the form of H-bond between the hydrophilic group of CH3（CH2）7OSO3^- and 6 waters. The strength of H-bonds belongs to medium. Binding free energy revealed that the hydration shell was stable. The increase of the number of water molecules will cause increases of the total charge of hydrophilic group and S10-O9-C8 bond angle, but decreases of the alkyl chain length and the bond lengths of S10-O11, S10-O12 as well as S10-O13, respectively.     

电泳显示双层微胶囊的制备

以尿素-甲醛原位聚合法与明胶-阿拉伯胶复凝聚法相结合制备了电泳显示双层微胶囊．考察了系统调节剂、搅拌速度、pH值和加醛方式对单层微胶囊粒径分布及表面形貌的影响，以及双层微胶囊与单层脲醛树脂微胶囊在干燥过程中的破损率．实验结果表明，以明胶为系统调节剂，pH值为3．0—3．5，采用滴加方式加入甲醛制备的单层脲醛树脂微胶囊，囊壁透明、光滑、球形度好；单层脲醛树脂微胶囊包覆明胶后制备的双层微胶囊壁材强度和韧性有显著提高．     

纳米碳酸钙/聚苯乙烯复合粒子的制备与表征

通过无皂乳液聚合制备了纳米碳酸钙/聚苯乙烯复合粒子,研究了单体用量对单体转化率和包覆率的影响。利用TGA、TEM、SEM、分光光度计等仪器分析了复合粒子的包覆率、结构形态及其在甲苯中的分散性和稳定性。结果表明:在适当的单体用量下,苯乙烯能以较高转化率聚合并包覆于纳米CaCO3表面;改性后的纳米CaCO3复合粒子在甲苯中的分散性和稳定性良好。将复合粒子分散于苯乙烯中原位合成纳米碳酸钙/聚苯乙烯复合材料,该复合材料的冲击性能比纯聚苯乙烯明显提高。     

新型丙烯酸酯抑尘剂的合成及应用性能

以丙烯酸丁酯（BA）、甲基丙烯酸甲酯（MMA）为主要单体，采用传统的乳液聚合方法合成了稳定的聚丙烯酸酯水溶性抑尘剂乳液，考察了单体配比、引发剂和乳化剂用量对乳液性能的影响。此外，还采用黏度、IR、TG、SEM等方法对乳液进行了表征，研究了其作为固沙抑尘剂时的固沙抑尘效果。结果表明MMA质量含量25%、引发剂占单体质量0.8%、乳化剂质量含量3%时，所得产品作为固沙抑尘剂使用效果好，热稳定性和黏度等满足室外抑尘的需要。