PI/TiO2纳米复合膜的H2/CH4和H2/N2分离性能

以可溶性聚酰亚胺为基质 ,经乙酸修饰后的钛酸丁酯为TiO2 溶胶前体 ,NMP为共溶剂 ,采用溶胶凝胶法可制得PI/TiO2 纳米复合膜。采用XPS、TEM和气体透气性能测试等手段 ,对复合膜的结构和H2 分离性能进行了表征。结果表明 ,复合膜中钛酸丁酯已转化为TiO2 ,PI与TiO2 两相结合完好。TiO2 以颗粒状均匀分布在PI基质中 ,其颗粒粒径约为 1 0nm。复合膜的H2 ,N2 和CH4 透气系数随着TiO2 含量的增加而明显增加。当TiO2 含量为2 2 3 %时 ,对H2 的透气系数为 1 4 .1Barrer,对H2 /N2 和H2 /CH4 的分离系数分别为 1 87.5和 1 4 3 .2 ,因此 ,该复合膜是一种较为理想的H2 分离和回收膜材料     

基于扩展Kalman滤波的声阵列定位数据融合算法

利用各阵元和目标相对于一中心阵元的几何关系建立目标运动方程，坐标变换方程和声阵列测量方程，并以此建立了声阵列目标定位模型。在此基础上提出了基于扩展Kalman滤波算法的目标定位数据融合算法。通过地面目标和空中目标的计算机仿真表明，本算法能够有效地克服由于智能雷布阵的随机性给智能雷定位数据估计带来的困难，对声阵列定位数据也能进行较好的融合，对提高定位精度有一定效果。     

溶胶—凝胶法制备α—TiO2气凝胶

以无机盐TiCl4为前躯体，采用容胶—凝胶法结合超临界干燥技术制各超细TiO2气凝胶，并采用XRD和TEM技术进行表征。结果表明，采用该法，可制得流动性好的白色球形α—TiO2气凝胶颗粒，其平均粒径约为20nm。     

硫酸浓度对纳米级SO4^2-／TiO2固体超强酸的影响

用锐钛型纳米TiO2制备了纳米级SO4^2-／TiO2固体超强酸，分析了硫酸浓度不同时其比表面积、失重率、红外光谱及催化活性的不同。当硫酸浓度为1．0mol／L时，它在450～900℃的失重率为3．3％，比表面积为105．2m^2／g，对乙酸和丁醇酯化反应的酯化率达到98．4％。玻璃球负载纳米级SO4^2-／TiO2固体超强酸的重复使用性能好，在乙酸和丁醇的酯化反应中重复使用9次后的酯化率才由初次的99．3％变为84．9％。     

SiGe合金氧化层中的纳米结构

我们在硅锗合金衬底上采用氧化等制膜方式生成零维和三维的纳米结构样品,用高精度椭偏仪(HPE)、卢瑟福背散射谱仪(RBS)和高分辨率扫描透射电子显微镜(HR-STEM)测量样品的纳米结构,并采用美国威思康新州立大学开发的Rump模拟软件对卢瑟福背散射谱(RBS)中的CHANNEL谱和RANDOM谱分别进行精细结构模拟,计算且测量出纳米氧化层与锗的纳米薄膜结构分布,并且反馈控制加工过程,优化硅锗半导体材料纳米结构样品的加工条件.我们在硅锗合金的氧化层表面中首次发现纳米锗量子点和量子层结构,我们首次提出的生成硅锗纳米结构的优化加工条件的氧化时间和氧化温度的匹配公式和理论模型与实验结果拟合得很好.     

镍—纳米A12O3复合电镀的工艺研究

文章研究了镍—纳米氧化铝复合电镀的配方和工艺条件，考察了纳米微粒的用量、分散剂、分散方法、pH、电流密度、施镀条件等因素对施镀工艺和镀层外观的影响。通过正交设计法获得最佳工艺条件为：pH＝4．5，t＝60℃，电流密度J≈3.2A/dm^2。     

用MATLAB设计鲁捧PID压力控制器系统

利用可重复执行的交互式MATLAB软件，给出了鲁棒PID压力控制器的设计方法。研究结果表明、所设计的PID压力控制器的调节时间T≤0．5s，当输入为阶跃信号时，系统能达到ITAE最优。仿真结果表明，通过串联一个增益放大器，当C。在0．1—10范围内变化时，所设计的PID压力控制器具有很强的鲁棒性。     

Matched field noise suppression： Principle with application to towed hydrophone line array

Discrete noise source suppression in underwater acoustic channel has attracted great attention in recent years. The paper proposes a new principle for dealing with the problem. This new principle is called matched field noise suppression (MFNS). Based on a previous work of the authors group, a full understanding about how a discrete noise source shows effects on the performance of a towed hydrophone line array has been obtained. In light of that finding,MFNS is proposed, which explores and utilizes the characteristics of the noise transmission channel to achieve much greater suppression of the noise in comparison with existing approaches. MFNS combines the concept of matched field processing (MFP) and optimal sensor array processing (OSAP) together to suppress the discrete noise source and to maintain an optimal beam for receiving far-field wanted plane wave signals. A MFNS beam-former is deduced in constraint with signal plane-wave response being unit and noise matched field response being zero. A dosed-form solution of the weight vector for the beam-former is given. Computer simulation results agree well to the theoretical analysis.     

Nanoengineering of Flux Pinning Sites in High－Tc Superconductors

Volume pinning forces were determined for a variety of bulk high-Tc superconductors of the 123-type from magnetization measurements. By means of scaling of the pinning forces, the acting pinning mechanisms in various temperature ranges were identified. The Nd-based superconductors and some YBCO crystals exhibited a dominating pinning of the δTc-type (i.e., small, superconducting pinning sites). In contrast to this, the addition of insulating 211 particles provided pinning of the δl-type; providing effective pinning in the entire temperature range acting as a “background” pinning mechanism for the peak effect. Due to the small coherence lengths of the high-Tc compounds, effective pinning sites are defects or particles of nanometer size relative to ε^3. Integral magnetic measurements of the magnetization as a function of temperature in large applied magnetic fields (up to 7 T) revealed that practically all high-Tccompounds were spatially inhomogeneous, which could becaused by oxygen deficiency (YBCO), solid solutions of Nd/Ba (NdBCO and other light rare earth compounds), intergrowths (Bi-based superconductors), and doping by pair-breaking dopants like Zn, Pr. This implies that the superconducting sample consists of stronger and weaker superconducting areas, coupled together. In large applied fields, this coupling gets broken and the magnetization versus temperature curves revealed more than one superconducting transition. In contrast, irradiation experiments by neutrons, protons,and heavy-ions enabled the artificial introduction of very effective pinning sites into the high-Tc superconductors, thus creating a large variety of different observations using magnetic data. From all these observations, we construct a pinning diagram for bulk high-Tc superconductors explaining many featuresobserved in high-Tc samples.     

感应测井信号处理及应用研究

综合论述了感应测井信号处理方面的成果 .重点涉及感应测井信号处理理论、信号处理中几何因子选择、滤波器最优化设计、实际非线性测量信号处理的实现 .总结了常用几何因子的应用局限性 ;提出了利用相关技术、软约束技术等方法解决最优化滤波器设计中的问题 ;采用真分辨率合成与分辨率匹配技术相结合的信号处理思想 ,极大地减小了井眼附近的影响 ;实现了非线性信号自适应处理算法 .研究成果分别在双感应测井、高分辨率感应测井、阵列感应成像测井和高分辨率阵列感应测井中得到了应用