B值随机变量序列部分和的矩的收敛速度

本文讨论2阶一致光滑空间及2型空间中随机变量序列部分和的矩的收敛速度问题,所得定理推广了Chow的结果。     

甲基萘转移甲基化合成2,6-二甲基萘

以β-甲基萘和混合甲基萘为原料,均四甲苯和偏三甲苯为烷基化剂,无水alCl3为催化剂,二氯甲烷为溶剂,进行转移甲基化反应合成2,6-二甲基萘.考察了反应温度、催化剂和烷基化剂的加入量以及烷基化剂种类对反应结果的影响.     

全球化知识经济潮流与两岸未来教育发展趋势（Ⅱ）——以指标评价为基础的检证观点

3．3评价结果 3．3．1多元尺度法 (1)评价对象 1)检定值 依据多元尺度法分析结果，采三维构面进行17个评价对象的空间配置，压力系数可达0．03769．R^2为0．98917，介于“非常好”与“好”之间；若采二维构面进行空间配置，则压力系数值为0．14148，介于“还可以”与“不好”之间(参表2)，R^2为0．89671．     

Resource Search in Unstructured Peer-to-Peer System Based on Multiple-Tree Overlay Structure

We propose a multiple-tree overlay structure for resource discovery in unstructured P2P systems. Peers that have similar interests or hold similar type of resources will be grouped into a tree-like cluster. We exploit the heterogeneity of peers in each cluster by connecting peers with more capacities closer to the root of the tree. The capacity of a peer can be defined in different ways （e.g. higher network bandwidth, larger disk space, more data items of a certain type etc.） according to different needs of users or applications.     

Joint Strength with Soldering of Al2O3 Ceramics After Ni-P Chemical Plating

Ni-P alloy was chemically plated on Al2O3 ceramics to produce uniform alloy coatings at temperatures below 70~C. Cu metal was electroplated onto the Ni-P coating to facilitate the soldering and shorten the chemical plating time. Then, the electroplated ceramic specimens were soldered with 60 wt.% Sn-40 wt.% Pb solder in active colophony. The highest shear strength was acquired after the heat treatment at 170℃ for 15 min. The joint fractures mostly propagated along the interface between the ceramics and the Ni-P coating, with some fracture in both the ceramics and the Ni-P coating near the interface and some along the interface between the Cu and Ni-P coatings. The results show that ceramic surface roughness and the chemical plating parameters influence the coating quality, and that suitable heat treatment before the soldering also improves the adhesion between the ceramics and Ni-P coatings, thus strengthening the joints.     

关于2-群的注记

通过对2-群的研究，得到了一类2-群的结构，进而给出了一类无限2-群有无限的阿贝尔子群的例子．     

2,3-二溴甲基-5,6-二氰基吡嗪的合成新方法

以2,3-二甲基-5,6-二氰基吡嗪为原料,在AIBN的引发下,用NBS进行自由基溴化反应,合成了标题产物,其结构经熔点,MS,1HNMR,UV等予以确证,从而为该物质的合成探索了一条新途径.     

数列{N(u,v)=2uv+u+v}的若干性质

本文得出了数列{N（u,v)=2uv u v}的一些性质，并提出了关于素数的一个猜想。     

硫酸钛水解制备TiO2纳米粒子载荷添加剂

以硫酸钛为前驱体，采用溶胶－凝胶－超临界干燥法制备TiO2纳米粒子润滑油载荷添加剂。采用红外光谱、BET氮容量吸附、透射电镜、热生－差热分析、X－射线衍射等手段对TiO2纳米粒子的特性进行了表征，分析了制备过程中的各种影响因素。结果表明，采用强烈搅拌、匀速滴加絮凝剂、控制反应终点的pH值以及用乙醇为介质进行超临界干燥的方法制备出的TiO2纳米粒子的平均粒径为15－20nm，比表面积约为100m%2/g，其结构为锐态型，表面有微量水和乙醇吸附。     

Turbo码译码深度δ对其译码性能的影响

介绍了两种新的译码算法：AL－1和AL－2，通过计算机仿真结果，讨论了该算法的译码深度对Turbo码性能的影响。