一个计算金属半径的近似公式

本文提出一个计算金属原子半径新的近似公式，并计算了５８种金属的原子半径，其结果与实验测定值非常接近。     

东莞理工学院图书馆现状及发展对策

文章在分析了东莞理工学院图书馆在藏书、人员以及文献保障能力等现状的基础上，提出了具体的应对措施。     

具有半导体导电特性的腈纶研究

研究了由二价铜盐、还原剂和硫化剂浴液处理法制备导电性腈纶的影响因素、实施方法、导电性腈纶的结构和性能，确定了适宜的工艺条件。研究表明：一浴法和二浴法处理的反应历程和处理结果基本相同，但还原剂、硫化剂的匹配及用量不同；导电化处理后腈给大分子排列的规整性略有下降，宏观形态及物理机械性能无明显变化；当纤维中Ｃｕ９Ｓ５含量达１２．５％时，质量比电阻下降至１０－１Ω·ｇ／ｃｍ２以下。纤维具有明显的半导体导电特性。     

凝胶萃取过程中的溶质分配和凝胶滞胀

在Flory理论的基础上,用凝胶网络弹性自由能的标度关系推导分析了滞胀度和分配系数的表达式及其影响因素。结果表明很多情况下不能用凝胶在纯溶剂中的平衡溶胀度来估计凝胶萃取的浓缩能力。理论上还预示进入凝胶网络中的溶质量随凝胶致密程度的增加和溶质分子尺寸的增加而减小,这表明凝胶网络对大分子溶质的排斥是一种热力学效应。     

乙醇对小白鼠胚胎的毒性和维生素的解毒作用

乙醇对小白鼠有致畸效应,尤其是对中枢神经系统(CNS)和骨骼系统.适量的维生素B_1和烟酰胺能解除由乙醇引起的小白鼠胎鼠毒害作用.     

层流液柱吸收法测定气体在液相中的扩散系数

采用射流吸收的简捷方法，通过测定由Ｓｈｏｕｔｈｗｅｌｌ型孔板所产生的截面速度均匀的层流喷射液柱所吸收的气体量，由渗透理论所导出的模型，可计算出一定温度、压力下的微溶气体在液相中的分子扩散系数Ｄ。在温度为３０～４５℃的范围，测试结果与文献值吻合良好．     

超氧物歧化酶对糖尿病模型大鼠血液和晶状体中自由基及其清除剂的影响

本工作发现糖尿病大鼠晶状体和血液中的ＬＰＯ、ＭＤＡ水平高于正常大鼠，而Ｔ－ＳＯＤ、Ｃｕ·Ｚｎ－ＳＯＤ水平降低（Ｐ＜Ｏ．０１）．观察用不同剂量ＳＯＤ及不同时间的治疗方案，结果大剂量比小剂量，长时间比短时间更能改善自由基和清除剂的状况，提示糖尿病患者晶状体中自由基代谢异常，这可能和糖尿病性白内障有关；表明ＳＯＤ可能是防治糖尿病性白内障的良药．     

产芽孢细菌B130（BACILLUS SPP）培养条件的初步研究

本文就产芽孢细菌B130(Bacillus spp.)培养条件进行了初步研究,筛选出产菌量较高且来源方便,价格低廉的培养基成分(％w/v):豆饼粉3,麸皮4,玉米粉3,最适pH:6.5或8.0,确定了最佳培养时间区间为平衡期末期。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

设计走向科学化的重要途径——设计方法学研究的崛起及其成就

本文从当代设计所面临的严峻挑战出发,回顾设计方法学的崛起,综述了在设计及设计方法学研究方面,主要发达国家采取的措施及主要专家、学者的贡献和成就。指出:设计必须科学化,而设计方法学研究是设计走向科学化的重要一步;必须加强对设计本身的研究;计算机技术在设计领域中的应用及其与设计理论研究的结合,对设计的发展及科学化将具有特别重要的意义。