各向异性的气体-颗粒介质内的二通量辐射传热模型

二通量模型是计算气体-颗粒平板内辐射热通量的简化方法. 在最初的二通量模型中, 辐射场被假设成在半球方向的各向同性. 但是对于燃烧领域的气体-颗粒混合介质, 颗粒的散射通常都是各向异性的, 这样, 原有的二通量模型就会由于忽略各向异性而产生严重的误差. 文中一个多层四通量模型被运用到包含气体-颗粒混合物的辐射热通量的计算. 给出了模型的解析求解过程, 定义了等价的平均交叉系数h和前向散射率z来描述整个平板散射的各向异性. 为了验证模型的准确性, 计算了一个无限大平板内的辐射传递过程, 并与解析结果进行了比较. 结果表明提出的模型能够得到准确的结果, 对原有的二通量模型具有较好的改进作用. 运用本模型计算含有飞灰/CO₂/H₂O的燃烧产物的辐射传递, 所得到的平板发射率与Goodwin的经典结果相吻合.     

Optimization of wear parameters of binary Al-25Zn and Al-3Cu alloys using design of experiments

Zinc-aluminum alloys have been used as bearing materials in the past. In recent years, binary Al-Zn alloys and Al-Zn-Cu alloys are being used as an alternative to the Zn-Al alloys for bearing applications. In this study, both binary Al-25Zn and Al-3Cu were prepared using stir casting process. Homogenization of the as-cast alloys was performed at 350℃ for 8 h and then, the alloys were furnace-cooled to 50℃. The homogenization led to the removal of the dendritic structure of the as-cast alloys. After homogenization, wear parameters optimization was carried out using Taguchi technique. For this purpose, L₉ orthogonal array was selected, and the control parameters selected are load, velocity, and sliding distance. The optimum parametric condition was obtained using signal-to-noise (S/N) ratio analysis, and specific wear rate (SWR) is the selected response. The "smaller-the-better" is the goal of the experiment for S/N ratio analysis. After the optimization, confirmation tests were carried out using analysis of variance (ANOVA) from the developed regression equation. Finally, wear mechanism studies were conducted using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) images.     

Preparation and characterization of doubly substituted microwave absorbing material by sol-gel technique for super high frequency applications

Rare earth Dy~(3+)and divalent Mn~(2+)elements substituting W-type hexagonal ferrites Ba_(1-x)Dy_xZn_2Fe_(16-y)Mn_yO_(27)(x=0,0.02,0.06,0.1 and y=0,0.1,0.3,0.5)were prepared by sol-gel method.The thermo-gravimetric analysis(TGA)and differential scanning calorimetry(DSC)was carried out to find the temperature at which single phase can be obtained.XRD patterns indicate the presence of the single phase for all the synthesized samples with the absence of any extra peak due to unreacted material and secondary phases.The occurrence of absorption bands at low wave numbers(563 and 446 cm~(-1)),can be assigned to the stretching vibration of metal and oxygen ions in FTIR spectra,which also confirms the single hexagonal phase for prepared material.The grains are of platelet like structure,which enhances the microwave absorption properties of hexagonal ferrites.The synthesized material exhibits the minimum reflection loss of-20.9 dB at 11.8 GHz frequency,which reflects the applications of this material in super high frequency devices.The microwave conductivity of the material increases with frequency.     

人类成懒虫

好逸人共性， 趋利本能同． 技术投所好， 密切不透风. 衣食召之来， 住行无费工， 虚拟填六欲， 人类成懒虫     

技术转移:企业资助的学术发明对创新的促进

<正>一般认为企业资助的学术研究对其他人来说是不太容易获取且用处不大的,布莱恩D.怀特及其同事提出的数据对这个看法提出了挑战。政府长期以来一直鼓励大学—企业之间的合作,以期对可以带来工作机会、强化投资并生产出改善生活质量产品的创新进行激励。同时,政府在科学上预算的收缩迫使大学通过其他途径寻求经费支持。根据美国国家科学基金会的统计,2012年由企业提供的科研经费只占到美国研究型大学年度科研经费的5%(大约32亿美元)。     

Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques

In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical (nanoindentation, compression, tensile) and thermal properties (co-efficient of thermal expansion- CTE) of the developed Al-SiC nanocomposites were studied. The SEM/EDS mapping images show a homogeneous distribution of SiC nanoparticles into the Al matrix. A significant increase in the strength (compressive and tensile) of the Al-SiC nanocomposites with the addition of SiC content is observed. However, it is noticed that the ductility of Al-SiC nanocomposites decreases with increasing volume fraction of SiC. The thermal analysis indicates that CTE of Al-SiC nanocomposites decreases with the progressive addition of hard SiC nanoparticles. Overall, hot extruded Al 1.5 vol% SiC nanocomposites exhibited the best mechanical and thermal performance as compared to the other developed Al-SiC nanocomposites.     

Sonochemical synthesis of nanostructured nickel hydroxide as an electrode material for improved electrochemical energy storage application

A facile and fast approach for the synthesis of a nanostructured nickel hydroxide(Ni(OH)_2) via sonochemical technique is reported in the present study. The X-ray diffraction results confirmed that the synthesized Ni(OH)_2 was oriented in β-phase of hexagonal brucite structure. The nanostructured Ni(OH)_2 electrode exhibited the maximum specific capacitance of 1256 F/g at a current density of 200 mA/g in 1 M KOH_((aq)). Ni(OH)_2 electrodes exhibited the pseudocapacitive behavior due to the presence of redox reaction. It also exhibited long-term cyclic stability of 85% after 2000 cycles, suggesting that the nanostructured Ni(OH)_2 electrode will play a promising role for high performance supercapacitor application.     

泛代数上的Groebner-Shirshov基理论

综述了域上或交换代数上的线性（-）代数的相应的簇（范畴）的 Groebner-Shirshov 基理论的新成果，如:结合代数（包括群（半群）代数），自由代数的张量积，李代数，Di-代数，pre-李代数，Rota-Baxter代数，metabelian李代数，L-代数，半环代数，范畴代数，等．以上结果包含了许多应用，尤其是给出了一些著名结论的新的证明．     

青藏铁路西藏段沿线高影响天气预报服务研究

利用1982~2011年间对青藏铁路西藏段150个自动站的降水、积雪、沙尘、霜冻、冰雹、最高温度、最低温度和雷暴等气象要素的观测和统计数据,得出了每个台站多年月平均的统计结果,对每种灾害的多年月均值进行空间制图和说明。在此基础上结合西藏气候背景和特点,建立了不同区域和不同等级下灾害性天气类型和指标的确定方法,以及预报服务方法。     

多轮撬杠的应用

多轮撬杠是在普通撬杠基础上进行改进,使其具备旋转移动功能的一种新工具,可以实现定向旋转、降低人力消耗。本文介绍了多轮撬杠的设计和实际应用,多轮撬杠对于机械设备移动有帮助。