Effect of air ionization on blood serotonin in vitro

Summary The effect of negative and positive air ionisation on siliconized blood serotonin was studied in vitro. The experiments showed that within 10 min positive ionisation increased serotonin levels in total blood (+40%), plasma (+90%), erythrocytes (+50%) and thrombocytes (+200%). On the other hand, negative ionization (10 min) lowered the serotonin content of total blood (–30%), plasma (–42.5%), erythrocytes (–41.7%) and thrombocytes (–72.3%), thus confirming the Krueger Effect in vitro.This research was generously supported by a grant from the Joint Research Fund of the Hebrew University and Hadassah, and Dr. and Mrs.Leonard Appleby of Palmbeach, Florida.Acknowledgment: Our thanks are due to Mr.B. Shalita, Mrs.Zippora Adar and Mrs.Olga Fradkin for devoted technical assistance.     

Differential effects of the serotonin receptors on cultured rat cerebral cortical neurons

Effects of serotonin (5-HT) on cerebral cortical neurons were examined by patch clamp techniques. 5-HT produced a variety of responses such as outward (19/73 patches/neurons), slow inward (15/73 patches/neurons), fast inward (8/73 patches/neurons), and mixed currents (initially fast inward deflection followed by an outward response: 2/73 patches/neurons), with a latency of 12 sec, 15 sec, 0 sec, and 0 sec respectively, at a holding potential of −60 mV in whole-cell patches. The fast inward currents were again evoked by a selective 5-HT3 receptor agonist, 1-(m-chlorophenyl)-biguanide hydrochloride (CPBG). In the cell-attached patch clamp configuration, 5-HT inside the patch pipette elicited single channel currents with slope conductances of 42 pS and 132 pS (4/42 patches/neurons). CPBG inside the patch pipette evoked inward single channel currents with a lower slope conductance of 41 pS (3/23 patches/neurons). In contrast, application of 5-HT or a 5-HT₂ receptor agonist, α-methyl-5-hydroxytryptamine-maleate, outside the patch pipette induced outward single channel currents with a major slope conductance of 140 pS (8/30 patches/neurons) or 135 pS (6/20 patches/neurons), respectively. These results indicate that the outward and fast inward currents may be mediated respectively by the 5-HT₂ receptor, which is coupled to a G-protein, and by the 5-HT₃ receptor, which contains the non-selective cation channel, and that the mixed type may be caused by both the 5-HT₂ and 5-HT₃ receptors. Received 27 September 1996; received after revision 4 November 1996; accepted 7 November 1996     

正常赖默—悌曼反应研究:超声波辐射与相转移催化合成方法

系统研究了正常及反常赖政－悌曼反应（NormalorAbnormalReliner－TiemannReavction，NRYorART）；研究了相转移住化方法和超声波辐射技术及其在正常Reliner—Tiemann（NRT）反应中的应用，从而使反应条件温和，效率增加，对邻比大，时间缩短，取得较好收效。     

一种二氢苯并噻喃衍生物的新型合成法

介绍２－丁烯醛与苯硫酚之间的酸催化分子间一步成环反应，合成一种二氢苯并噻喃衍生物的新方法，产品收率高达８４％。     

用子波变换分析方法实时监测视觉诱发电位的潜伏期

诱发电位的实时监测在临床中有重要意义。本文提出利用多分辨率子波分析技术来实时监测视觉诱发电位的潜伏期。为克服随机噪声的影响，我们引入相邻响应的相关系数来修正所检测得的潜伏期的偏移，并应用前一次响应的波峰位置来决定当前的搜寻范围。实验表明，本方法能实时监测视觉诱发电位的潜伏期。     

江苏盐城沿海滩涂发展生态旅游的初步研究

通过分析江苏盐城沿海滩涂的自然概况、旅游发展现状和存在的问题,认为该区域发展生态旅游应遵循可持续发展的观点,不仅应保护自然环境,还应保护社会环境和经济环境.提出了该地区应侧重发展科考旅游、田园风光旅游、动物观赏旅游和休闲度假旅游,并对生态旅游项目、旅游线路规划、环境保护对策进行了设计.     

太平沟大桥曲线箱梁顶推施工设计概述

太平沟大桥该桥全长358．8m，平面位于R=1380．965m圆曲线及L5=300m的缓和曲线上，是国内曲线连续顶推桥长最长、跨径最大的一座桥。详细介绍了太平沟大桥曲线箱梁顶推设计特点及施工设计要点。     

机械合金化工艺对Fe-Ni合金显微结构的影响

对机械合金化制备的Fe-Ni粉体利用X射线衍射(XRD)进行分析，得到了不同Ni含量和不同球磨时间Fe-Ni纳米晶的XRD谱．实验表明，w(Ni)=10％和20％时，Ni溶入Fe晶格，分别在球磨20h和50h后形成单一的a(bcc)相；w(Ni)=50％时，其先后经历了γ(fcc)→←a(bcc)正逆转变，在球磨120h后最终形成单一γ(fcc)相．无论是a(bcc)相还是γ(fcc)相．它们的固溶度均比块体Fe-Ni合金显著提高．w(Ni)=35％时，则始终是两相共存．对试样的XRD谱采用3种不同的方法测定了Fe-Ni粉体的晶粒尺寸和显微畸变，发现经球磨20h后，不同Ni含量的粉体均呈纳米结构，并随球磨时间延长，Fe-Ni纳米晶的晶粒尺寸下降而显微畸变上升．     

A Theoretical Approach for Estimating Fracture Toughness of Ductile Metals

Fracture toughness is very important when applying Damage Tolerance Design and Assessment Techniques. The traditional testing approach for obtaining fracture toughness values is costly and time consuming. In order to estimate the fracture toughness of ductile metals, the fracture mechanics theory, materials plastic deformation theory and materials constructive relationships are employed here. A series of formulae and a theoretical approach are presented to calculate fracture toughness values of different materials in the plane stress and plane strain conditions. Compared with test results, evaluated values have a good agreement.