基于ULS、TLS和超声测高仪的天然次生林中不同林冠层树高估测

【目的】应用不同数据源分析不同林冠层中探测提取树高的异同,探索适用于中国北方天然次生林树高估测的方法。【方法】以东北林业大学帽儿山实验林场中林施业区0.25 hm²样地为研究区域,基于无人机激光雷达(unmanned aerial vehicle laser scanning, ULS)、地基激光雷达(terrestrial laser scanning,TLS)和Vertex IV超声测高仪实测单木树高,根据冠层高度分布(canopy height distribution, CHD)对林冠层进行分层,对不同林冠层(上层和下层)、不同树木类型(针叶树和阔叶树)探测提取的树高进行对比与分析。【结果】由CHD计算得到的冠层分层阈值为8.5 m。树高的离群值大多产生在林冠上层,阔叶树比针叶树更容易产生离群值,ULS比TLS更容易产生离群值。在林冠上层,ULS比TLS估测树高的相对均方根误差(rRMSE)低2.56%,ULS提取针叶树树高的rRMSE比阔叶树低2.68%;在林冠下层,ULS仅能探测到少量树木,ULS比TLS探测提取树高的 rRMSE高6.31%,TLS提取针叶树树高的rRMSE比阔叶树低1.16%。【结论】针叶树的树高估测精度普遍高于阔叶树;当TLS和ULS均能对单木进行完全扫描时,具有准确提取树高的潜力;树高离群值多由冠型不规则或相互交叉的阔叶树产生,而大部分针叶树,由于具有规则的冠型,所以产生的离群值较少;基于CHD对林冠层进行划分能够较好地反映不同数据源估测树高的适用范围,具有一定的推广意义。     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

凋亡抑制蛋白与肿瘤关系的研究

凋亡抑制蛋白(inhibitor of apoptosis proteins,IAPs)可以作为癌症诊断和治疗的靶点,在肿瘤研究方面备受关注,就凋亡抑制蛋白的结构、功能、在肿瘤中的表达与肿瘤的关系等研究进展作一综述,为凋亡抑制蛋白的研究提供信息和思路.     

不良地质条件下管道基础处理与施工

管道输送是一种较为安全的运输手段，但在不同的地质条件下的管道设计与施工有着不同的技术要求。文章介绍了在湿陷性黄土地区基处理的几种方法以及灰土及砂垫层处理方法。     

Pilot Study on Nanofiltration Combined with Ozonation and GAC for Advanced Drinking Water Treatment

IntroductionThe conventional process for surface water treatment,which consists of flocculation, sedimentation and filtrationcurrently, had been applied inproducingdrinkingwater formany years. Although this process can remove turbidityand bacteria in surface water effectively, only about from20% to 30% of natural organic matter ( NOM) can beeliminated. When the purified water is disinfected bychlorination, these NOMs may react with chlorine. As aresult some dis…     

建筑物地基处理的设计与施工探讨

以具体工程为例，介绍了建筑物地基处理的设计、施工中遵循的原则，施工中遇到特殊情况时采取的处理方法和必要的检测方法，对几种桩基的设计要求、施工工艺及过程、质量控制等情况进行了简单阐述。     

给水处理系统高效经济运行的生产性评价

研究给水处理系统的高效经济运行技术 ,是保证水厂高效、安全、经济供水的重要措施 .生产运行实践证明 ,采用高效经济方式运行的确可以节约可变费用 .尤其是在冬季低温低浊水的净化中 ,可变费用的节约程度最高可达 2 0 %以上     

传染病医院污水处理工艺选择案例

文章通过对临汾市传染病医院拟建的传染病区污水的来源、排放量、污染物的分析,结合污水处理原则,提出了具体的污水处理工艺。并根据污染物去除率预测了污染物浓度,与污染物排放标准进行对比分析,结果表明所选工艺处理后的污染物浓度能够达标,污水处理工艺是可行的。     

40Cr大轴断裂分析

对冶金矿山某产品的40Cr材料制作的大轴热处理后发生断裂现象，进行了理化检验及综合分析，找出了造成大轴断裂原因－首先是由于存在淬火应力，而未得到及时回火，其次是原材料中存在严重的冶金缺陷。     

卡介苗素治疗慢性支气管炎的临床观察

目的　研究卡介苗素对慢性支气管炎的预防及治疗作用 .方法　对 90例慢性支气管炎患者给予控制感染、对症治疗 .除常规给予止咳、化痰药外 ,同时肌注卡介苗素 2mL/次 ,每周 3次 ,3个月为 1个疗程 ,并与常规治疗对比 .结果　经治疗后卡介苗素组血清IgG(免疫球蛋白G)和IgE(免疫球蛋白E)明显下降 ,其抗复发的显效率、有效率分别为 4 7.8%、34.4 % ,总有效率为 82 .2 % ,显著优于对照治疗组 .结论　卡介苗素能明显改善机体免疫功能 ,对IgE有一定的调节作用 .