镍与锌试剂体系的吸附伏安法研究

用线性扫描吸附安法研究了镍(Ⅱ)与锌试剂络合物在悬汞电极上的伏安特性及反应机理.发现电极反应为吸附在电极表面的Ni(Ⅱ)L的不可逆还原.在0.05mol/LNH3-0.06mol/LNH4l介质中,络合物峰电流与Ni(Ⅱ)浓度在1×10-10-1×10-1范围内呈线性,并将此法用于中草药中镍的测定.     

吸附伏安法同时测定中草药中痕量的镍和钴

提出一种有效的测定痕量镍和钻的吸附伏安法。利用悬汞电极作为工作电极,在0.005mol/L NH_3～0.06 mol/L NH_4Cl—3.0×10~(-6)mol/L锌试剂的最佳底液中,测定镍和钴的线性范围分别为1×10~(-10)～8×10~(-8)mol/L和1×10~(-10)～1×10~(-7)mol/L,检测下限均为5×10~(-11)mol/L。在工作中探讨了镍、钻和锌试剂配合物的吸附伏安行为及其在电极表面上的电化学反应机理。研究证明,该方法灵敏、可靠、省时,特别适用于中草药中痕量镍和钴的定量分析。     

铜(Ⅱ)-2-(2,3,5-三氮唑偶氮)-5-二甲氨基苯甲酸络合物吸附波的研究及应用

研究了新试剂 2 (2 ,3,5 三氮唑偶氮 ) 5 二甲氨基苯甲酸 (TZAMB)与铜 (Ⅱ )的络合物极谱行为 .在 0 .0lmol/LKHP HNO3 0 .1mol/LKNO3 底液中 ,络合物Cu(Ⅱ ) TZAMB在 - 0 .0 9V (Vs.SCE)产生灵敏的阴极化二阶导数波 ,峰电流与Cu(Ⅱ )的浓度在 2 .0× 10 -7～ 2 .0× 10 -6mol/L范围内呈线性关系 ,检测限达 1.0× 10 -8mol/L .该法成功检测出食品中铜的含量 ,结果满意     

钴-亚硝基R盐体系的电化学研究

钴(Ⅱ)与亚硝基红盐(NRS)、氯代十四烷基吡啶(TPC)所形成的三元络合物在示波器极谱仪上产生一灵敏的二阶导数极谱波,比没有TPC存在时,峰高增加近20倍.在7.0×10-10～6.0×10-6mol/L的范围内,钴(Ⅱ)的浓度与峰电流有良好的线性关系,检出限为1.4×10-10 mol/L(8.0 ng/L).研究了络合物的电化学行为,经计算得到Co(Ⅲ)-NRS-TPC三元络合物的配比为136,稳定常数为6.5×1037,三元络合物在电极表面的吸附符合福兰克林方程,吸附系数(β)为1.21×105 L/mol,饱和吸附量(Гs)为9.8×10-10 mol/cm2,吸引因子(v)为0.96.     

谷胱甘肽-铜极谱络合吸附波的研究

在铜离子存在下,谷胱甘肽(GSH)在0.2mol/LNaAc-HAc(pH4.7)缓冲溶液中,与铜离子反应得到谷胱甘肽(GSH)与一价铜离子络合物,在单扫示波极谱上产生一灵敏的络合吸附波,峰电位在-0.59V处(vs.SCE),导数波高与谷胱甘肽浓度在4.0×10-8mol/L～1.0×10-5mol/L范围内分段成线性关系,检测限为1.0×10-8mol/L,相对标准偏差3.3%。研究了极谱波的性质,测得络合物组成为GSH:Cu(Ⅰ)=1:1,表观稳定常数为5.1×1019。     

纯铝中痕量镓的测定及机理研究

研究了纯铝中痕量镓示波极谱的直接测定方法.在醋酸缓冲溶液中,溴邻苯三酚红(BPR)与镓形成具有电活性的红色络合物,该络合物在滴汞电极上于-1.15V产生一灵敏的极谱还原波,峰电流与镓浓度在2.0×10-7mol/L～1.0×10-5mol/L范围内呈良好线性关系,检测限达1×10-7mol/L.该方法应用于纯铝中痕量镓的直接测定,简便快速,灵敏度高,结果准确.此外,还研究了电极反应的动力学参数.     

铅（Ⅱ）—Tiron络合物极谱吸附波研究

在0.56mol/L NaAc—0.04%Tiron 溶液中,铅(Ⅱ)与 Tiron 产生的络合物,在单扫描示波仪上可观察到一灵敏的极谱导数波,其峰电位为-0.49V(vs.SCE),峰电流与铅浓度在7.7×10~(-6)—6.8×10~(-6)mol/L 范围内成线性关系,检测限为3.8×10~(-(?))mol/L.应用该波测定了铜合金中的微量铅,结果良好,精密度和准确度均较满意,本文研究了形成铅-Tiron 络合物吸附波的条件,探讨了波的性质,用极谱法测定出其络合比为1:1.     

吸附溶出催化伏安法测定痕量锗的研究

提出了吸附溶出催化伏安法测定痕量锗的方法。该方法最佳体系为0.15 mol/L KCl+1.0×10~(-3) mol/L 3,4-二羟基苯甲醛(DHB)+2.0×10~(-3)mol/L EDTA+3.0×10~(-3)mol/L V(Ⅳ),pH2.15。其线性范围为1.2×10~(-10)～6.O×10~(-8)mol/L,最低检出浓度为3.6×10~(-11)mol/L Ge(Ⅳ)。     

铁(Ⅲ)-钙镁试剂络合物吸附波的研究

在pH4.3的HAc-NaAc水溶液中,铁(Ⅲ)-钙镁试剂在滴汞电极上,于-0.56 V(vs.SCE)处有一良好的极谱波,其二阶导数峰电流与铁(Ⅲ)浓度在9.1×10-8~2.2×10-6mol/L(r=0.999,n=10)范围内有良好的线性关系,检测限为7.3×10-8mol/L.研究了络合物的组成和极谱波的性质.该方法已用于生物样品中铁的测定.     

Ru(phen)32+-SO32--Ce(Ⅳ)体系化学发光法测定葡萄酒中的亚硫酸盐总量

提出了Ru(phen)32+-SO32+-Ce(Ⅳ)体系化学发光法测定溶液中亚硫酸盐的方法.SO32-浓度与化学发光强度在1.0×10-7～1.0×10-4mol/L范围内成正比,检出限为1.97×10-7mol/L(S/N=3),1.0×10-4mol/LSO32溶液重复6次测定结果的相对标准偏差为4.9%.该方法用于测定白葡萄酒中亚硫酸盐总含量为4.006×10-5mol/L,加标回收结果令人满意.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.