Development of Fe(III)-containing ether-functionalized imidazolium ionic liquids for aryl Grignard cross-coupling of alkyl halides

A series of Fe(Ⅲ)-containing imidazolium-based ionic liquids containing ether substituents,including[C3OMim][FeCl4](1,[C3OMim]=1-(2-methoxyethyl)-3-methylimidazolium),[C3OiPim][FeCl4](2,[C3OiPim]=1-isopropyl-3-(2-methoxyethyl)imidazolium),[C3OBim][FeCl4](3,[C3OBim]=1-butyl-3-(2-methoxyethyl)imidazolium),[(C3O)2im][FeCl4](4,[(C3O)2im]=1,3-bis(2-methoxyethyl)imidazolium),[C3OMim][FeBr4](5)and[(C3O)2im][FeBr4](6),were prepared and characterized by elemental analysis,Raman spectroscopy and electrospray ionization mass spectrometry.The catalytic performances of 1–6 and related Fe(III)-based catalysts in the cross-coupling of aryl Grignard reagents with alkyl halides bearing-hydrogens were studied,revealing that mono(ether)functionality improves the catalytic activity and that bis(ether)functionality improves the reusability.After simply decanting the product contained in the ethereal layer,complex 4,which containing bis(ether)-functionalized imidazolium cation,could be successfully recycled seven times.     

Synthesis, structure of iron(III)-containing imidazolium salts and their catalytic activity in the alkylation of aryl Grignard reagents

A series of iron(III)-containing imidazolium salts of the general formula [DRim][FeX₄] (R = 2,6-diisopropylphenyl, IPr, X = Cl, 1; R = IPr, X = Br, 2; R = tertbutyl, ^t Bu, X = Cl, 3; R = isopropyl, ⁱ Pr, X = Cl, 4; R = benzyl, Bn, X = Cl, 5; R = Bn, X = Br, 6) have been prepared in high yields via reactions of anhydrous ferric halides with equivalent of the corresponding N,N-dihydrocarby-limidazolium halides, where 2–6 are novel ones. All of the complexes were characterized by elemental analysis, Raman spectroscopy, electrospray ionization mass spectroscopy, and X-ray crystallography for 1 and 2. All of them were non-hygroscopic and air-stable, with four of them existing as solids (1–4) and two as liquids (5 and 6) at room temperature. A preliminary catalytic study on the coupling of 4-tolylmagnesium bromide with cyclohexyl bromide revealed that 1 and 3 possessed the highest activity. In comparison, 2, 4 and 5 exhibited moderate activity and the least active complex was 6.     

Synthesis and characterization of carbon-bridged bis(phenolate) lanthanum alkoxides and their catalytic behavior for the polymerization of L-lactide

Four lanthanum alkoxides stabilized by a carbon-bridged bis(phenolate) ligand were synthesized and their catalytic behavior for the ring-opening polymerization of L-lactide was explored. Reactions of [(MBMP)LaCp(THF) 2 ] (MBMP 2 = 2,2′-methylene-bis(6-tert-butyl-4-methyl phenoxo)) with HOCH 2 Ph, HOCH 2 CF 3 , HOCH(CH 3 ) 2 , and HOCH 2 CH 2 N(CH 3 ) 2 , respectively, in a 1:1 molar ratio in THF gave the dimeric lanthanum alkoxo complexes [(MBMP)Ln(μ-OR)(THF) 2 ] 2 (OR = OCH 2 Ph(1), OCH 2 CF 3 (2), OCH(CH 3 ) 2 (3), OCH 2 CH 2 N(CH 3 ) 2 (4)]. These complexes were well characterized, and the definitive molecular structure of complex 1 was determined. It was found that complexes 1 to 4 are efficient initiators for the ring-opening polymerization of L-lactide. The structure of the alkoxo groups has a significant effect on the catalytic behavior, and complex 2 can initiate L-lactide polymerization in a controlled manner.     

Synthesis, structure, optoelectronic properties of novel zinc Schiff-base complexes

Two novel zinc Schiff-base complexes, bis-(N-(2-hydroxybenzidene)-p-aminodimethylaniline)zinc(II) (2) and bis-(N-(2-hydroxy-1-naphthidene)-p-aminodimethylaniline)zinc(II) (4) were designed and synthesized. Both the complexes exhibit good solubility in organic solvents and excellent thermal stabilities. A single crystal of 2 was grown and its crystalline structure was determined from X-ray diffraction data. Analysis of the electronic structures of both the zinc complexes calculated by density functional theory reveals a localization of orbital. The UV-Vis absorption and photoluminescence profiles of 4 in thin film are similar to those of 2, but the emission for 4 is red-shifted compared to 2. Three-layered devices with a configuration of ITO/NPB/2/Alq 3 /LiF/Al and ITO/NPB/4/Alq 3 /LiF/Al show a yellow and red emission, respectively.     

4-Formyl-2-（2H-benzotriazol-2-yl）-phenol： an ESIPT chromophore

In the present work, excited state intramolecular proton transfer （ESIPT） emission properties of a new benzotriazole derivative 4-formyl-2-（2H-benzotriazol-2-yl）- phenol （C1） were studied. 4-Formyl-2-（2H-benzotriazol-2- yl）-methoxy-benzene （C2）, 4-formyl-2-（2H-benzotriazol-2- yl）-phenyl acetate （C3） and 4-methyl-2-（2H-benzotriazol- 2-yl）-phenol （C4） were used as the reference molecules. ^1H NMR chemical shift of hydroxy group in C1 was located at more down field than that of C4 or p-hydroxy-benzaldehyde （C5）, respectively. C1 showed two absorption bands in the range of 260-400 nm zones in various solvents, while C2 and C3 exhibited single absorption band. The equal molar mixtures of C2/C5 or C3/C5 showed single absorption band. C2 and C3 displayed single fluorescence emission band in various solvents, while C1 exhibited dual emission bands in some strong polar solvents. Furthermore, the second emission band in these strong polar solvents showed the large Stokes shift. The results show that the second emission band of C1 was produced by ESIPT. C2 and C3 could not undergo ESIPT due to no hydroxy group. The geometry optimization calculation of enol and keto forms in the ground and excited states of C1 provided tough theoretical evidences of ESIPT.     

New terpenoids from the roots of Jatropha curcas

Two new sesquiterpenoids,(1S,2R)-dihydroxycycloax-4(15)-ene(1),14-dehydroxyl daucucarotol(2),and one new rhamnofalane diterpenoid,2-hydroxy-3-dehydroxycaniojane(3),together with two known compounds,curcusone D(4) and curcusone C(5),were isolated from the roots of Jatropha curcas.The chemical structures of these compounds were established by chemical methods and extensive 1D-and 2D-NMR spectroscopic data analyses.     

Ionic iron（III） complex of aryloxo-linked bis（imidazolium） cations： efficient and recyclable catalyst for aryl Grignard cross-coupling of alkyl chlorides

A novel phenol-linked bis（imidazolium） salt, H3LCl2 （L = O-4-C（CH3）3-C6H2-2,6-di[CH2{C（NCHCH- NAr）}]2, Ar = 2,6-diisopropylphenyl, 1）, was designed and used to prepare an ionic iron（III） complex [H2L][FeCl4] （2）. Complex 2 was a highly efficient catalyst for aryl Grignard cross-coupling of alkyl chlorides bearing β-hydrogens. Furthermore, complex 2 was reusable and could be reused in at least eight times without significant loss in catalytic activity.     

An operator on ascent sequences

We solve two problems about ascent sequences: how to get the ascent sequence of the reflection of A with respect to its antidiagonal for a matrix A∈ Intn and its ascent sequences, and how to determine the ascent sequence of A+B for k×k matrices A∈ Intn and B∈ Intm. We give the other definition of ascent sequence and get M-sequence. For the first question, we define M-sequence of A and rewrite the ascent sequences as another form.We build the bijection between M-sequences and ascent sequences and prove that our bijection is well-defined. For the second question, we define an operation on M-sequences. On the basis of the operation and the bijections, we get the ascent sequences of the sum of two matrices.     

A practical process for the synthesis of translocator protein 18kDa imidazopyridine ligand

In this article, an effective feasible method to synthesize translocator protein 18kDa （TSPO） imidazopyridine ligand 7 is discussed. A new procedure for the synthesis of the key intermediate 17 has been developed in four steps （condensation, diazo reaction, hydrolysis, amidation） from 2-aminopyridine 18. The overall yield was increased from 18% to 31.6%. One of the key steps is using activated copper powder as a catalyst in several cycles. Finally, reduction of 17 with Zn dust completed the synthesis of TSPO imidazopyridine ligand 7 in 86% yield.     

Texture evolution of commercial pure Ti during cold rolling and recrystallization annealing

X-ray diffraction (XRD) was employed to analyze the texture evolution of commercial pure (CP) Ti during cold rolling and recrystallization annealing. The texture components were measured by electron backscattered diffraction (EBSD) after recrystallization annealing. The CP Ti tends to form a texture with the basal pole tilted 30°-40° away from the normal direction toward the transverse direction. The texture of the initial hot-rolled plate can be classified into three kinds, i.e., the pyramid texture (1013)[5230] and (2021)[1015], the basal plane texture (0001)[2110], and the stronger prism texture (1120)[0001]. After cold rolling and annealing (700℃, 60 min), the main texture components are the cold-rolled texture (1125)[1123] and the recrystallized texture (1013)[5230]. The texture (2021)[1015] is inherited from the texture of the initial hot-rolled plate with the decrease of orientation density gradually. The volume contents of the cold-rolled texture {2115} <0110> and the recrystallized texture {1013} <1210> are calculated by EBSD. After recrystallization annealing, the specimen is rich in the recrystallized texture and inherits some of texture components from the cold-rolled texture. When the annealing time is prolonged, the anisotropic value decreases.     

Identification of Markovian open system dynamics for qubit systems

We discuss the problem of identification of the dynamical generators for open two-level quantum systems in a Markovian environment.Based on Bloch sphere representation,the identification problem is converted to the estimation of a 3-dimensional real process matrix A and an inhomogeneous term c.The parameter identifiability and sufficient conditions for completely identification of A and c are obtained.Further discussion shows that the obtained sufficient conditions are not always necessary.The approach can be generalized to finite-level open quantum systems in an arbitary Markovian environment.     

Synthesis, spectra, structure and quantum chemistry study on two novel oxovanadium complexes with hydrotris （pyrazolyl） borate ligands

Vanadium is a trace element in lives. Though vana- dium was investigated in life science from 1876, the importance of vanadium in lives was not recognized until 1971[1,2]. Since bromoperoxidase and nitrogenase were found and proved that vanadium plays an …     

A new second-order Mehrotra-type predictor-corrector algorithm for SDO

In Zhang's recent works,a second-order Mehrotra-type predictor-corrector algorithm for linear optimization was extended to semidefinite optimization and derived that the algorithm for semidefinite optimization had O(n~(3/2)log(X~0)~T·S~0/ε) iteration complexity based on the NT direction as Newton search direction. In this paper, we extend the second-order Mehrotra-type predictor-corrector algorithm for linear optimization to semidefinite optimization and discuss the polynomial convergence of the algorithm by modifying the corrector direction and new iterates. It is proved that the iteration complexity is reduced to O(n~(3/2)log(X~0)~T·S~0/ε), which coincides with the currently best iteration bound of Mehrotra-type predictor-corrector algorithm for semidefinite optimization.     

硫脲基和席夫碱基取代的硫杂杯[4]芳烃的设计与合成

对叔丁基硫杂杯[4]芳烃-1,3-二醛基衍生物与苯基氨基硫脲发生"1 2"缩合反应,合成了含硫脲基和席夫碱基的新型硫杂杯[4]芳烃衍生物,后处理简单,产率达85%.新化合物的结构经元素分析、1H NMR和ESI-MS等表征证实.     

Molecular dynamics simulation of nanoscale contact and sliding processes for probes with different tip radius of curvature

Three-dimensional simulations were carried out molecular dynamics （MD） to study the contact and sliding processes between diamond points with different tip radius of curvature and surfaces of single crystal copper. The material deformation, abrasion mechanism, lattice defects, the force of contact process, and the sliding friction process were investigated. The simulation results show that the contact force, dislocations, and stacking fault defects, increase during the contact process with increasing contact depth or tip radius of curvature. The dislocations emit along the [10i-] and [i-01] direction and then a glide band is formed. It was also found that a greater tip radius of cur- vature results in a larger groove and more material defor- mation. The normal force and friction increase with increasing tip radius of curvature, but the coefficient of friction decreases. The stacking faults spread along the sliding direction and increase with increasing tip radius of curvature. In addition, the number of upheaval atoms increases as the radius of tip curvature or sliding distance increases.     

A wide neighborhood arc-search interior-point algorithm for convex quadratic programming

In this paper, we propose an arc-search interior-point algorithm for convex quadratic programming with a wide neighborhood of the central path, which searches the optimizers along the ellipses that approximate the entire central path. The favorable polynomial complexity bound of the algorithm is obtained, namely O(nlog(( x~0)~TS~0/ε)) which is as good as the linear programming analogue. Finally, the numerical experiments show that the proposed algorithm is efficient.     

Bridging of Calixarenes with N, N＇-Bis（Chloroacetyl） Propylenediamine

A new bridging reagent, N, N‘-bis (chloroacetyl) propylenediamine was used to explore the relativeactivity and bridging pattern of p-ten-bury lcalix [4] arene, p-tert-butylcalix [6] arene and butylcalix [8] arene. It wasfound that the bridging reaction is selectively, at least, preferably at 1, 3-position for p-tert-butylcalix [4] arene and p-tert-butylcalix [6] arene, 1,5-position for p-tert-butylcalix [8] arene. Taking the yield of bridged calixarene as a compar-sion standard, the activity decreases with the increasing of the number of phenolic units in calixarene.     

The loop effects on the chargino decays ～χ±1→～χ0 1ff ′in the MSSM

The lighter chargino three body decays ～χ±1→～χ0 1ff ′ via the W^± boson and the charged Higgs boson H^± were studied in the R-parity conserved Minimal Supersymmetric Standard Model （MSSM）. We treat ～χ±1 decays as production and decay of W^± and H^± i.e.,～χ±1→～χ01W^±（H^±） → χ0 1ff ′. Both higgsino- like and wino-like ～χ±1 decays were well investigated. These decays are calculated at 1-loop level and the loop corrections are found to be less than three percent. The signal of the charged Higgs H^± production from ～χ±1 decays is discussed. It will offer important information about the chargino and neutralino sector, as well as the charged Higgs sector in the MSSM.     

Design, synthesis and nonlinear optical properties of “dendronized hyperbranched polymers”

A new type of dendritic polymer, named dendronized hyperbranched polymer (DHP), was prepared successfully by the macro-monomer approach. Thanks to the perfect 3D isolation effects, DHPG1 exhibited good NLO property with d 33 value of 133 pm/V, higher than its analogues of dendronized polymer and dendrimer, and its stability of NLO effect was also enhanced.     

Super-Edge-Connectivity of G(k,d,s)(s≥k/2)

A graph G is super-edge-connected,for short super-λ,if every minimum edge-cut consists of edges adjacent to a vertex of minimum degree.Alphabet overlap graph G(k,d,s)is undirected,simple graph with vertex set V={v|v=1()kv…v;vi∈{1,2,…,d},i=1,…,k}.Two vertices u=(u1…uk)and v=(v1…vk)are adjacent if and only if us+i=vi or vs+i=ui(i=1,…,k-s).In particular G(k,d,1)is just an undirected de Bruijn graph.In this paper,we show that the diameter of G(k,d,s)is k s,the girth is 3.Finally,we prove that G(k,d,s)(s≥k/2)is super-λ.