NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reduction by coupling combustion with recycling flue gas in iron ore sintering process

A new process called ‘NO _x reduction by coupling combustion with recycling flue gas (RCCRF)’ was proposed to decrease NO _x emission during the iron ore sintering process. The simulation test of NO _x reduction was performed over sintered ore and in the process of coke combustion. Experimentally, NO _x reduction was also carried out by sintering pot test. For sintered ore, the amount of NO _x emission is reduced by 15wt%–25wt% at 400–550°C using 2.0vol% H₂ or 2.0vol% CO, or reduced by 10wt%–30wt% at 560–720°C using 0.15vol% NH₃. NO _x reduction is around 10wt% by coupling combustion of pyrolysis gas and coke, or around 16wt% by recycling flue gas into coke combustion. By RCCRF, the maximum NO _x reduction ratio is about 23wt% in coke combustion experiment and over 40wt% in sintering pot test.     

Effect of Ag addition on the thermal stability and glass-forming ability of Zr<Subscript>35</Subscript>Ti<Subscript>30</Subscript>Cu<Subscript>7.5</Subscript>Be<Subscript>27.5</Subscript> bulk metallic glass

The thermal stability and glass forming ability (GFA) of Zr35-xTi30Cu7.5Be27.5Agx (x = 0-10) alloys were studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and ultrasonic techniques. We found that the addition of 1 at.% Ag can considerably enhance the GFA as indicated by an increase in the critical glass dimension from 15 mm in the Zr35Ti30Cu7.5Be27.5 alloy to 20 mm in the Zr34Ti30Cu7.5Be27.5Ag1 alloy. However, with the addition of more Ag the supercooled liquid region (△Tx) and y parameter (defined as Tx/(Tg+Tl)) drastically decreased from 155 K and 0.436 to 76 K and 0.363, respectively, resulting in a decrease in the GFA. Additionally, the elastic constant (the ratio of shear modulus to bulk modulus or Poisson’s ratio) was also used as a gauge to evaluate the GFA in Zr35-xTi30Cu7.5Be27.5Agx alloys.     

Effect of Co on the martensitic transformation,crystal structure and magnetization of Ni<Subscript>52.5</Subscript>Mn<Subscript>23.5</Subscript>Ga<Subscript>24</Subscript> based ferromagnetic shape memory alloys

Five(Ni52.5Mn23.5Ga24)100-xCox(x = 0,2,4,6,8) alloys were prepared by arc melting,and the effects of Co addition on the martensitic phase transformation,crystal structure and magnetization were investigated.The phase transformation temperatures Ms,Mf,As and Af are proportional to the content of Co in the(Ni52.5Mn23.5Ga24)100-xCox alloys,which appears to be due to the variation in the valance electron concentration.The Curie temperature is sensitive to the composition of the alloy.As the amount of Co changes,both the Co-Mn exchange interaction and the distance between Mn atoms change.These,in turn,affect the Curie temperature and magnetization behavior of the alloy.The martensite phases in all the alloys are domained in three different orientations,the domain boundary was determined to belong to the family of {112} lattice planes.     

Nd<Subscript>2</Subscript>Fe<Subscript>17</Subscript> nanograins effect on the coercivity of HDDR NdFeB magnets with low boron content

Relationships between the coercivity of hydrogenation disproportionation desorption recombination (HDDR) Nd_12.5Fe_81.5−x Co₆B _x bonded magnets and boron content were investigated. Nd₂Fe₁₇ phase with planar magnetic anisotropy is present in the microstructure when x= 4at%–5.88at%, which does not reduce the coercivity of the bonded magnets. High-resolution transmission electron microscopy (TEM) images show that Nd₂Fe₁₇ phase exists in the form of nanocrystals in the Nd2Fe14B matrix. There is an exchange-coupling interaction between the two phases so that the coercivity of HDDR Nd_12.5Fe_81.5−x Co₆B _x bonded magnets is hardly reduced with a decrease in boron content.     

Preparation and luminescence characteristics of Sr3SiO5：Eu^2＋ phosphor for white LED

The Sr3SiO5：Eu^2＋ phosphor was synthesized by high temperature solid-state reaction. The emission spectrum of Sr3SiO5：Eu^2＋ shows two bands centered at 487 and 575 nm, which well agree with the theoretic values of emission spectrum. The excitation spectrum for 575 nm emission center has several excitation bands at 365, 418, 458 and 473 nm. And the results show that the emission spectrum of Sr3SiO5：Eu^2＋ is influenced by the Eu^2＋ concentration. The relative emission spectra of the white-emitting InGaN-based YAG：Ce^3＋ LED and Sr3SiO5：Eu^2＋ LED were investigated. The results show that the color development of InGaN-based Sr3SiO5：Eu^2＋ is better than that of InGaN-based YAG：Ce^3＋, and the CIE chromaticity of InGaN-based Sr3SiO5：Eu^2＋ is （x=0.348, y=0.326）.     

He-H2 mixture and Er3NiHx packing for the refrigeration enhancement of pulse tube refrigerator

The computation with the theory of modified Brayton Cycle indicates that higher cooling power and coefficient of performance for a pulse tube refrigerator can be achieved with He-H2 mixture as working gas than those with pure He in the temperature region of 30 K. In addition, it is found that Er3Ni, a regenerative material, is able to absorb H2 and produces Er3NiHx. The computation presents that the regenerative performance of Er3NiHx is better than that of Er3Ni due to its higher volume specific heat. Experimental results show that the pulse tube refrigeration performance in 30 K temperature region is enhanced greatly with He-H2 mixture and Er3NiHx packing.     

Near-infrared to visible up-conversion emissions of Er^3＋ doped Al2O3 powders derived from the sol-gel method

The Er3 doped Al2O3 powders were prepared by the sol-gel method using the aluminium isopropoxide [Al(OC3H7)3]-derived Al2O3 sols with addition of the erbium nitrate [Er(NO3)3.5H2O]. The different phase structure, including three crystalline types of (Al,Er)2O3 phases, γ, θ, α, and two Er-Al-O phases, ErAlO3 and Al10Er6O24, was obtained with the 1 mol% Er3 doped Al2O3 powders at the different sintering temperatures of 600―1200℃. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the 2H11/2, 4S3/2→4I15/2 and 4F9/2→4I15/2 transitions of Er3 , were detected by a 978 nm semiconductor laser diodes excitation. The phase structure and OH content had evident influence on the up-conversion emissions intensity. The maximum intensities of both the green and red emissions were obtained respectively for the Er3 doped Al2O3 powders sintered at 1200 ℃, which was composed mainly of α-(Al,Er)2O3, less of ErAlO3 and Al10Er6O24 phases, and with the least OH content. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er3 doped Al2O3 powders.     

Giant magneto-optical faraday effect of nanometer Fe-In<Subscript>2</Subscript>O<Subscript>3</Subscript> granular films

The giant magneto-optical Faraday effect of nanometer ferromagnetic metal-semiconductor matrix Fe-ln2O3 granular films prepared by the radio frequency sputtering are studied. The result shows that the Faraday rotation angle θF value of the granular film samples with Fe volume fraction x = 35% is of the order of 10^5（°）/cm at room temperature. Temperature dependence of the Faraday rotation angle θF of Fe0.35（In2O3）0.65 granular films shows that θF value below 10 K increases rapidly with the decrease of the temperature, and when T= 4.2 K, θF value is 106（°）/cm. Through the study of the dependence of low field susceptibility on temperature and the hysteresis loops at different temperatures, it has been found that when the temperature decreases to a critical point Tp = 10 K, the transformation of state from ferro-agnetic to spin-glass-like occurs in Fe0.35（In2O3）0.65 granular films. The remarkable increase of the Faraday rotation angle θF value of Fe0.35（In2O3）0.65 granular films below 10 K seems to arise from the sp-d exchange interaction of the granular film samples in the spin-glass-like state.     

Change of NO<Subscript>2</Subscript> column density over Beijing from satellite measurement during the Beijing 2008 Olympic Games

The effect of the air quality ensuring measures for the Beijing 2008 Olympic Games in reducing air pollution during the game period is assessed using the tropospheric NO₂ column density retrieved from Ozone Monitoring Instrument onboard AURA satellite. The basic method of the assessment is the comparison of the NO₂ column densities during the game period with that during the corresponding period of 2005−2007 for the Beijing area, and the comparison among Beijing and neighbouring cities Tianjin and Tangshan, which are of similar situation in air pollution of NO₂ in recent years. The images of tropospheric NO₂ column densities over Northern China during the Beijing 2008 Olympic Games show the remarkable effect of the air quality ensuring measures in reducing NO₂ pollution: the tropospheric NO₂ column density in Beijing is much lower than that in Tianjin and Tangshan, while there were very similar values in the three large cities during the same period of the last three years. About 40% reduction in tropospheric NO₂ column density over the Beijing area is obtained from the assessment during July to August, 2008, a key period of air quality ensuring measures for the Beijing 2008 Olympic Games.     

Dissolution of Al<Subscript>2</Subscript>TiO<Subscript>5</Subscript> inclusions in CaO-SiO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> slags at 1823 K

Al-Ti-O inclusions always clog submerged nozzles in Ti-bearing Al-killed steel. A typical synthesized Al₂TiO₅ inclusion was immersed in a CaO-SiO₂-Al₂O₃ molten slag for different durations at 1823 K. The Al₂TiO₅ dissolution paths and mechanism were revealed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Decreased amounts of Ti and Al and increased amounts of Si and Ca at the dissolution boundary prove that inclusion dissolution and slag penetration simultaneously occur. SiO₂ diffuses or penetrates the inclusion more quickly than CaO, as indicated by the w(CaO)/w(SiO₂) value in the reaction region. A liquid product (containing 0.7–1.2 w(CaO)/w(SiO₂), 15wt%–20wt% Al₂O₃, and 5wt%–15wt% TiO₂) forms on the inclusion surface when Al₂TiO₅ is dissolved in the slag. Al₂TiO₅ initially dissolves faster than the diffusion rate of the liquid product toward the bulk slag. With increasing reaction time, the boundary reaches its largest distance, the Al₂TiO₅ dissolution rate equals the liquid product diffusion rate, and the dissolution process remains stable until the inclusion is completely dissolved.     

Glass-forming ability,microhardness, corrosion resistance,and dealloying treatment of Mg60-xCu40Ndx alloy ribbons

The influence of Nd addition on the glass-forming ability (GFA), microhardness, and corrosion resistance of Mg_60-xCu₄₀Nd_x (x=5, 10, 15, 20, and 25, at%) alloys were investigated by differential scanning calorimetry, Vickers-type hardness tests, and electrochemical methods. The results suggest that the GFA and microhardness of the amorphous alloys increase until the Nd content reaches 20at%. The corrosion potential and corrosion current density obtained from the Tafel curves indicate that the Mg₃₅Cu₄₀Nd₂₅ ternary alloy exhibits the best corrosion resistance among the investigated alloys. Notably, nanoporous copper (NPC) was synthesized through a single-step dealloying of Mg_60-xCu₄₀Nd_x (x=5, 10, 15, 20, and 25) ternary alloys in 0.04 mol·L-1 H₂SO₄ solution under free corrosion conditions. The influence of dealloying process parameters, such as dealloying time and temperature, on the microstructure of the ribbons was also studied using the surface diffusivity theory. The formation mechanism of dealloyed samples with a multilayered structure was also discussed.     

The impact of HS radicals on the measured rate constant of H<Subscript>2</Subscript>S with OH radicals

The rate constant for the reaction of OH radicals and hydrogen sulfide (H₂S) was studied in different bath gases (including N₂, air, O₂ and He) by using relative technique at 298 K. The small difference of the measured rate constants between N₂ and those with the presence of O₂ suggested possible influence of HS self reaction. Further experiments with NO_x presence for scavenging HS demonstrated this assumption. The rate constant of (5.48±0.12) ×10^–12 cm³ molecule^–1 s^–1 obtained with 4.09 ×10^–4 mol m₃ NO presence may be accurate for estimating the atmospheric lifetime of H2S. The results provided circumstantial evidence that the rapid reaction of HS with N₂O is suspected.     

Synthesis, Characterization and Calorimetry of Ni（C4H8N2O3）2Cl2

A coordination complex was synthesized from NiCl2 and dipeptide glycylglycine（GG）. It was characterized by element analysis, NMR and TG methods, and then was determined to be Ni（C4HsN2O3）2Cl2. Using an isoperibolic reaction calorimeter, the standard molar enthalpy of formation of Ni（GG）2Cl2（solid） has been determined to be -（1 674.66±2.02） kJ · mol^-1 at 298.15 K.     

Compression behavior and equation of state of Ni77P23 amorphous alloy

The compression behavior of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using insitu high pressure energy dispersive X-ray diffraction with a syn- chrotron radiation source. The equation of state is determined by fitting the experimental data accord- ing to Birch-Murnaghan equation: -ΔV/V0=0.08606P-3.2×10-4P2 5.7×10-6P3. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa.     

Temperature effect on the corrosion and passivation characterization of Ni<Subscript>82.3</Subscript>Cr<Subscript>7</Subscript>Fe<Subscript>3</Subscript>Si<Subscript>4.5</Subscript>B<Subscript>3.2</Subscript> alloy in acidic media

The effects of temperature on corrosion and the electrochemical behavior of Ni_82.3Cr₇Fe₃Si_4.5B_3.2 glassy alloy in HCl, H₂SO₄, and H₃PO₄ acids were studied using AC and DC techniques. Impedance data reveal that the susceptibility to localized corrosion increases with increasing temperature. Potentiodynamic polarization curves reveal that the bulk glassy alloy is spontaneously passivated at all the investigated temperature in H₂SO₄ and H₃PO₄ solutions. A localized corrosion effect in HCl solution is clearly observed. The apparent activation energies in the regions of Tafel, active, and passive, as well as the enthalpies and entropies of the dissolution process were determined and discussed. The high apparent activation energy (E_a) value for H₃PO₄ solution in Tafel region is explained by the low aggressivity of PO₄3- ions.     

Composition dependence of viscosity for Al（1-x）Mgx（0≤x≤0. 10） alloys

Viscosities of molten Al（1-x）Mgx（0≤x≤0. 10 alloys have been measured in the temperature range of 973 K--1173 K by a torsional oscillation cup method. The viscosity dependence on temperature for Al（1-x）Mgx（0≤x≤0. 10 melts obeys Arrhenius equation. The viscosity increases with increasing magnesium concentration in the investigated system. There is an important relationship between viscosity and its glass-forming ability for metallic melt.     

Preparation of Al<Subscript>72</Subscript>Ni<Subscript>8</Subscript>Ti<Subscript>8</Subscript>Zr<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Y<Subscript>3</Subscript> amorphous powders and bulk materials

Amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were successfully fabricated by mechanical alloying. The microstructure, glass-forming ability, and crystallization behavior of amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). The isothermal crystallization kinetics was analyzed by the Johnson–Mehl–Avrami equation. In the results, the supercooled liquid region of the amorphous alloy is as high as 81 K, as determined by non-isothermal DSC curves. The activation energy for crystallization is as high as 312.6 kJ·mol?1 obtained by Kissinger and Ozawa analyses. The values of Avrami exponent (n) imply that the crystallization is dominated by interface-controlled three-dimensional growth in the early stage and the end stage and by diffusion-controlled two- or three-dimensional growth in the middle stage. In addition, the amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were sintered under 2 GPa at temperatures of 673 K and 723 K. The results show that the Vickers hardness of the compacted powders is as high as Hv 1215.     

Comparative analysis of the dissolution kinetics of galena in binary solutions of HCl/FeCl<Subscript>3</Subscript> and HCl/H<Subscript>2</Subscript>O<Subscript>2</Subscript>

A comparative study of the dissolution kinetics of galena ore in binary solutions of FeCl₃/HCl and H₂O₂/HCl has been undertaken. The dissolution kinetics of the galena was found to depend on leachant concentration, reaction temperature, stirring speed, solid-to-liquid ratio, and particle diameter. The dissolution rate of galena ore increases with the increase of leachant concentration, reaction temperature, and stirring speed, while it decreases with the increase of solid-to-liquid ratio and particle diameter. The activation energy (E _a) of 26.5 kJ/mol was obtained for galena ore dissolution in 0.3 M FeCl₃/8.06 M HCl, and it suggests the surface diffusion model for the leaching reaction, while the E _a value of 40.6 kJ/mol was obtained for its dissolution in 8.06 M H₂O₂/8.06 M HCl, which suggests the surface chemical reaction model for the leaching reaction. Furthermore, the linear relationship between rate constants and the reciprocal of particle radius supports the fact that dissolution is controlled by the surface reaction in the two cases. Finally, the rate of reaction based on the reaction-controlled process has been described by a semiempirical mathematical model. The Arrhenius and reaction constants of 11.023 s⁻¹, 1.25×10⁴ and 3.65×10² s⁻¹, 8.02×10⁶ were calculated for the 0.3 M FeCl₃/8.06 M HCl and 8.06 M H₂O₂/8.06 M HCl binary solutions, respectively.     

Chemical quenching and inhibition of positronium in Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

The pore structure of Cr2O3/Al2O3 catalysts and the surface chemical properties of these pores were characterized by positron lifetime and coincidence Doppler broadening (CDB) measurements. Four lifetime components could be resolved from the positron lifetime spectrum, with two long lifetime components and two short lifetime components. The two long lifetimes τ4 and τ3 are attributed to ortho-positronium (o-Ps) annihilation in large pores and microvoids, respectively. With increasing Cr2O3 content, both τ4 and its intensity I4 show sharp decrease, while τ3 and its intensity I3 keep nearly unchanged. The Doppler broadening S parameters also show sharp decrease with increasing Cr2O3 content. Detailed analysis of the CDB spectrum reveals that the parapositronium (p-Ps) intensity also decreases with increasing Cr2O3 content. This indicates that the change of o-Ps lifetime τ4 is due to the chemical quenching by Cr2O3 but not spin-conversion of positronium. The decrease of o-Ps intensity I4 indicates that Cr2O3 also inhibits positronium formation.     

Synthesis and characterization of Pt-MoO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>-TiO<Subscript>2</Subscript> electrodes for direct ethanol fuel cells

To enhance the CO-tolerance performance of anode catalysts for direct ethanol fuel cells, carbon nanotubes were modified by titanium dioxide (donated as CNTs@TiO₂) and subsequently served as the support for the preparation of Pt/CNTs@TiO₂ and Pt-Mo/CNTs@TiO₂ electrocatalysts via a UV-photoreduction method. The physicochemical characterizations of the catalysts were carried out by using X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy of adsorbed probe ammonia molecules. The electrocatalytic properties of the catalysts for methanol oxidation were investigated by the cyclic voltammetry technique. The results show that Pt-Mo/CNTs@TiO₂ electrode exhibits the highest performance in all the electrodes. It is explained that, the structure, the oxidation states, and the acid-base properties of the catalysts are influenced due to the strong interaction between Ti and Mo species by adding TiO₂ and MoO _x to the Pt-based catalysts.