钴（Ⅱ）—氟哌酸络合物波的研究

氟哌酸（ＮＦＬＸ）在０．１ｍｏｌ·Ｌ＾－１ＮＨ３－ＮＨ４Ｃｌ（ｐＨ７．５）缓冲溶液中，与钴（Ⅱ）离子形成络合物，在单扫示波极谱仪上得一良好的络合物还原波，峰电位Ｅｐ＝－１．０９Ｖ（ｖｓ．ＳＣＥ），峰电流ｉｐ与钴（Ⅱ）浓度在０．０５０～２．５μｍｏｌ·Ｌ＾－１范围内成线性关系。用电化学手段研究了该体系的性质和反应机理，实验表明该波为不可逆吸附波。     

胆绿素的极谱分析研究

介绍了ＮａＯＨ溶液中（ｐＨ＞１１）利用胆绿素的阳极波的极谱分析方法，研究发现胆绿素在－０．４０Ｖ（ＶＳ．ＳＣＥ）左右产生一灵敏、稳定的极谱阳极波，该波的二阶导数与胆绿素溶液的浓发在２×ｌ０￣（－７）～１．８×ｌ０￣（－６）ｍｏｌ·Ｌ￣（－１）范围内成线性关系，其检测限为８×ｌ０（－８）ｍｏｌ·Ｌ￣（－１），并且在胆红素或０．０２ｍｇ·Ｌ￣（－１）白蛋白共存时无干扰，可用于胆绿素的测定，并对胆绿素的极谱阴极波和循环伏安图进行了研究，考察了胆绿素在－０．４０Ｖ（ＶＳ．ＳＣＥ）处的可逆波和－０．９８Ｖ（ＶＳ．ＳＣＥ）处的过氧化氢催化波的性质，对胆绿素的电化学反应提出了可能的机理。     

Ag（I）－QARH络合物在胶束溶液中的光度性质

在ｐＨ５．０的ＨＯＡｃ－ＮａＯＡｃ缓冲溶液中，当有０．１０％ＳＬＳ存在时，Ａｇ（Ｉ）与ＱＡＲＨ形成１：１络合物，λ＿（ｍａｘ）为５３５ｎｍ，ε为１．０５×１０￣５Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１），Ａｇ（Ｉ）含量在０．００５～１．００μｇ／ｍＬ范围内服从Ｂｅｅｒ定律，稳定常数为１．７８×１０￣（１５）．所提出的方法用于精铜矿中微量银的测定，结果满意     

溶菌酶的极谱催化氢波研究与应用

在０．３６ｍｏｌ／ＬＮＨ４Ｃｌ－０．０４ｍｏｌ／ＬＮＨ３Ｈ２Ｏ（ｐＨ８．３１）支持电解质中,溶菌酶（ＬＥ）产生一个极谱催化氢波,峰电位为－１．８０Ｖ（ｖｓ ＳＣＥ）．该极谱催化氢波二阶导数峰电流与ＬＥ浓度在 １．２ × １０－８－５．６ × １０－８ｍｏｌ／Ｌ范围内有线性关系．用于鸡蛋清中ＬＥ的测定,结果满意．     

Ag（I）—QARH络合物在胶束溶液中的光度性质

在ｐＨ５．０的ＨＯＡｃ－ＮａＯＡｃ缓冲溶液中，当有０．１０％ＳＬＳ存在时，Ａｇ（Ｉ）与ＱＡＲＨ形成１：１络合物，λｍａｘ为５３５ｎｍ，ε为１．０５×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，Ａｇ（Ｉ）含量在０．００５￣１．００μｇ／ｍＬ范围内服从Ｂｅｅｒ定律，稳定常数为１．７８×１０＾１５。所提出的方法用于精铜矿中微量银的测定，结果满意。     

吸附溶出伏安法测定水中痕量钴

介绍测定痕量钴的一种方法。在０．０１ｍｏｌ／Ｌ ＮＨ３·Ｈ２Ｏ－ＮＨ４Ｃｌ和１．０×１０＾－６ｍｏｌ／Ｌ酸性铬兰Ｋ（ＡＣＢＫ）溶液中，Ｃｏ（Ⅱ）产生很灵敏的还原波，其峰电位是－０．５２Ｖ（ｖｓ、ＳＣＥ）．Ｃｏ（Ⅱ）的浓度在２．０×１０＾－８￣５．０×１０＾－７ｍｏｌ／Ｌ的范围内与峰电流成直线关系，检测限是５．０×１０＾－９ｍｏｌ／Ｌ。这一方法用于测定水中痕量钴，结果令人满意。     

非有机溶剂萃取光度法测定铀的研究—PEG—Arsenazo Ⅱ—（NH_4）_2SO_4体系

本文研究了偶氮胂（Ⅲ）作萃取剂和显色剂，在ＰＥＧ－（ＮＨ４）２ＳＯ４－Ａｒｓｅｎａｚｏ（Ⅲ）体系中的非有机溶剂萃取光度法测定铀．将配合物从ｐＨ２．０（ＨＣｌ）溶液或ＨＣｌ—ＮａＡｃ缓冲溶液）水溶液中萃取至ＰＥＧ相，其最大吸收波长位于６５５ｎｍ，摩吸光系数为３．０×１０４Ｌ．ｍｏｌ－１．ｃｍ－１，Ｕ（ＶＩ）的线性范围为０－４．５μ／ｍｌ，轴与ＡｒｓｅｎａｚｏＣ（Ⅲ）的配位组成为１：１．将方法用于煤渣中铀的测定，获得了满意结果．     

新显色剂5－（4＇－氯－2＇羧基苯偶氮）绕丹宁与银的显色反应及其应用研究

在ＴｒｉｔｏｎＸ－１００存在下，ｐＨ＝５．０～５．５时，新试剂Ｃｌ－ＲＡＣＰ与银生成配合物，其最大吸收波长为５００ｎｍ，配合物的配位比为１：２，表观摩尔吸光系数为１．１×１０￣５·Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。Ａｇ（Ⅰ）的浓度在０～２．０μｇ·ｍｌ￣（－１）范围内符合比尔定律。该法用于阳极泥和废定影中银的测定，结果较满意，相对标准偏差为１％。     

304不锈钢焊缝在NaCl溶液中SCC的下限温度

本文用慢应变速率实验技术研究了３０４不锈钢焊接接头在ＮａＣｌ溶液中的应力腐蚀行为。结果发现：该体系发生应力腐蚀存在一个界限温度，ＮａＣｌ浓度低于１．０ｍｏｌ／Ｌ时，界限温度随ＮａＣｌ浓度的增加而下降；ＮａＣｌ浓度高于１．０ｍｏｌ／Ｌ时，ＳＣＣ的界限温度在很宽ＮａＣｌ浓度范围内变化不大。并给出了该体系发生ＳＣＣ的Ｔ°（Ｃ）－［Ｃｌ－］－ＳＣＣ图。焊接接头的应力腐蚀发生在焊缝区，应力腐蚀裂纹是沿着奥氏体枝晶间的δ－铁素体扩展的。     

非对称水溶性卟啉与钯（II）显色反应的光度法研究

研究了非对称性５，１０，１５－三（４－甲基－３－磺基苯）－２０－［４－（５－氟尿嘧啶）－３－磺基苯］卟啉（ＭＦｕＳＰＰ）测钯的显色条件，在表面活性剂十二烷基磺酸钠存在下，ｐＨ４．５￣６．０的弱酸性ＨＡｃ￣ＮａＡｃ缓冲介质中，用抗坏血酸催化，Ｐｄ（Ⅱ）与ＭＦｕＳＰＰ形成１：１配合物，最大吸收波长４１５ｎｍ，摩尔吸光系数ε＝１．８×１０＾５Ｌ·ｍｏｌ＾－１·ｃｍ＾－１，线性范围０￣２．０μｇ／１０ｍｌ     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.