Cu-11Fe-4Cr原位复合材料在HSO-3和/或Cl-介质中的耐蚀性

采用选择腐蚀技术,提取了Cu-11Fe-4Cr原位复合材料中Fe-Cr纤维,并测定了其电极电位。通过间歇式盐水喷雾实验和极化曲线测定,研究了Cu-11Fe-4Cr原位复合材料在HSO3-和/或Cl-介质中的腐蚀行为。用扫描电镜对腐蚀产物和腐蚀表面进行分析。结果表明,Cu-11Fe-4Cr原位复合材料中,E(Cu)相似文献   

Ou-40Ni-20Cr合金在含Cl^-介质中的电化学腐蚀行为研究

利用动电位扫描法和交流阻抗技术研究了传统电弧熔炼制备的Cu-40Ni-20Cr合金在不同Cl^-浓度的腐蚀介质中的电化学腐蚀行为．结果表明：合金在单一Na2SO4介质中具有较低的腐蚀电流，腐蚀速度较慢，腐蚀过程由电化学控制腐蚀，电化学阻抗谱呈单容抗弧特征．在含Cl^-腐蚀介质中，随着Cl^-浓度的增加，自腐蚀电位不同程度负移，腐蚀电流增大，腐蚀速度加快．Cl^-浓度大于0.02mol·L^-1时，出现Warburg阻抗特征，腐蚀过程由电化学控制转为扩散控制；加入Cl^-后，极化电阻减小，腐蚀过程中存在一定弥散效应．     

喷射沉积Al-Si-Fe-Mn-Cu-Mg合金的析出强化行为

利用热分析（DSC）,显微硬度测定和透射电子显微分析等手段研究了喷射沉积Al-20Si-5Fe-3Cu-1Mg合金的时效过程,结果表明,两种沉淀强化相S－Al2CuMg和σ-Al5Cu6Mg2从合金基体中析出,有效地提高了合金的室温强度和高温（300度）强度。     

Cu-60Fe-12Cr合金在含Cl-介质中的电化学腐蚀行为

利用动电位扫描法,结合电化学交流阻抗技术研究了用粉末冶金(PM)技术制备的Cu-60FFe-12Cr合金在含Cl-腐蚀介质中的电化学腐蚀行为.结果表明合金在单一Na2SO4介质中具有较低的腐蚀电流,腐蚀速度较慢,而在含Cl-腐蚀介质中,自腐蚀电位不同程度负移,膜电阻减小,腐蚀速度加快;合金在含Cl-介质中腐蚀电化学阻抗谱在呈单容抗弧特征,没有出现Warburg阻抗的性质,腐蚀过程由电化学反应控制;加入Cl-后,极化电阻减小;腐蚀过程中存在一定弥散效应.     

Cu-40Ni-20Cr合金在含Cl-介质中的电化学腐蚀行为研究

利用动电位扫描法和交流阻抗技术研究了传统电弧熔炼制备的Cu-40Ni-20Cr合金在不同Cl-浓度的腐蚀介质中的电化学腐蚀行为.结果表明:合金在单一Na2SO4介质中具有较低的腐蚀电流,腐蚀速度较慢,腐蚀过程由电化学控制腐蚀,电化学阻抗谱呈单容抗弧特征.在含Cl-腐蚀介质中,随着Cl-浓度的增加,自腐蚀电位不同程度负移,腐蚀电流增大,腐蚀速度加快.Cl-浓度大于0.02 mol.L-1时,出现Warburg阻抗特征,腐蚀过程由电化学控制转为扩散控制;加入Cl-后,极化电阻减小,腐蚀过程中存在一定弥散效应.     

Cu-50Cr合金在含Cl-介质中的腐蚀电化学行为研究

利用动电位扫描法,结合电化学交流阻抗技术研究了用传统电弧熔炼制备的Cu-50Cr合金在不同Cl-浓度介质中的腐蚀电化学行为.结果表明:随Cl-浓度的增加,自腐蚀电位均出现不同程度的负移,腐蚀电流增大,腐蚀速度加快;Cu-50Cr合金在中性Na2SO4溶液中未出现钝化现象,加入Cl-后,出现了钝化现象,但钝化区间很窄.从交流阻抗谱及拟合结果分析得知:在0.05mol/LNa2SO4和0.05mol/LNa2SO4 0.02mol/LNaCl腐蚀介质中交流阻抗谱呈单容抗弧特征,没有出现Warburg阻抗,表明电极表面的腐蚀受电化学反应控制,随Cl-浓度增加,开始出现Warburg阻抗,表明腐蚀过程由电化学反应控制转化为扩散控制.随Cl-浓度的增加,容抗弧减小,电荷传递电阻减小,腐蚀速度加快.     

Cr在Fe-Cr合金中扩散过程的原子尺度模拟研究

该文通过计算机模拟方法研究Cr在Fe-Cr合金中的扩散。用2BM(two band model)势函数模型计算了Fe的空位形成能以及Fe-Cr合金中Cr与空位V之间的结合能、空位迁移能。按照固体中杂质扩散的五频率模型,结合纯铁的分子动力学模拟,计算了合金中Cr原子的扩散系数。此外,在不同的温度和空位浓度条件下,对Fe-1%Cr合金直接进行了分子动力学模拟计算,获得了合金中Cr原子的扩散系数,结果与五频率模型计算结果较为一致。     

Cu-50Cr合金在含Cl^-介质中的腐蚀电化学行为研究

利用动电位扫描法，结合电化学交流阻抗技术研究了用传统电弧熔炼制备的Cu^-50Cr合金在不同Cl^-浓度介质中的腐蚀电化学行为．结果表明：随Cl^-浓度的增加，自腐蚀电位均出现不同程度的负移，腐蚀电流增大，腐蚀速度加快；Cu-50Cr合金在中性Na2S04溶液中未出现钝化现象，加入Cl^-后，出现了钝化现象，但钝化区间很窄．从交流阻抗谱及拟合结果分析得知：在0．05mol／LNa28O4和0．05mol／L Na2SO4＋0．02mol／L NaCl腐蚀介质中交流阻抗谱呈单容抗弧特征，没有出现Warburg阻抗，表明电极表面的腐蚀受电化学反应控制，随Cl^-浓度增加，开始出现Warburg阻抗，表明腐蚀过程由电化学反应控制转化为扩散控制．随Cl^-浓度的增加，容抗弧减小，电荷传递电阻减小，腐蚀速度加快．     

晶粒细化对Cu-20Ag-30Cr合金在HCl溶液中腐蚀电化学行为的影响

采用机械合金化通过控制球磨时间制备不同晶粒尺寸的三元合金粉末,然后分别以真空热压工艺制备常规晶粒尺寸和纳米晶粒尺寸的Cu-20Ag-30Cr合金块状合金。并且利用PARM273A和M5210电化学综合测试系统对两种合金进行电化学腐蚀测试,通过测定电化学极化曲线和交流阻抗谱研究了常规晶粒尺寸和纳米晶粒尺寸的Cu-20Ag-30Cr合金在不同浓度HCl溶液中的腐蚀电化学行为。结果表明随着HCl浓度的增加,腐蚀电流密度随之持续增大,自腐蚀电位持续负移,传递电阻持续减小,表明合金的腐蚀程度加剧,合金的耐腐蚀性能减弱;在相同浓度的HCl溶液中,纳米晶粒尺寸的Cu-20Ag-30Cr合金的腐蚀电流密度明显高于高于Cu-20Ag-30Cr合金,表明经过晶粒细化合金腐蚀速度加快,其耐腐蚀性能下降。     

Ni-Cr-Mo-Cu合金介质腐蚀和电化学腐蚀的性能

在Cr、Mo成分一定的情况下,通过改变Cu的质量分数(1%～5%),研究新型Ni-Cr-Mo-Cu高镍耐蚀合金在氧化性介质、还原性介质、氧化-还原性介质和质量分数6%的FeCl3中的耐蚀性能及其在H2SO4、HCl和FeCl3中的电化学行为.实验结果表明,w(Cu)=1%～5%的Ni-Cr-Mo-Cu合金具有优良的耐介质腐蚀、电化学腐蚀性能,在质量分数80%的H2SO4中钝化明显,在质量分数30%的HCl中自腐蚀电流低,在质量分数6%的FeCl3中有钝化区且未发生点蚀.4种实验材料中w(Cu)=3%的合金综合耐蚀性能最好,在质量分数80%的 H2SO4中有更宽的钝化平台和更低的维钝电流.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.     

Tracking data management using topology of moving object database system for moving object constrained trajectory in LBS application

Advances in wireless technologies and positioning technologies and spread of wireless devices, an interest in LBS (Location Based Service) is arising. To provide location based service, tracking data should have been stored in moving object database management system (called MODBMS) with proper policies and managed efficiently. So the methods which acquire the location information at regular time intervals then, store and manage have been studied. In this paper, we suggest tracking data management techniques using topology that is corresponding to the moving path of moving object. In our techniques, we update the MODBMS when moving object arrived at a street intersection or a curved road which is represented as the node in topology and predict the location at past and future with attribute of topology and linear function. In this technique, location data that are corresponding to the node in topology are stored, thus reduce the number of update and amount of data. Also in case predicting the location,because topology are used as well as existing location information, accuracy for prediction is increased than applying linear function or spline function.