Research on Properties of Woven Fabrics Treated by High Pressure Water Jet

The paper introduces a new technique for the treatment of the woven fabrics. Sprayed by high pressure water jet, the appearance, handle and stiffness of the fabric are improved. Other properties of the high pressure water treated fabrics like drape coefficient, air permeability, tenacity are also presented.     

Effect of Processing Conditions on the Interlaced Yarn

A new interlacer is used in this paper to investigate the effect of processing conditions on the properties of interlaced yarn. The experimental results show that number of tangles of interlaced yarn changes little with air pressure from 0.2 MPa to 0.5 MPa, and the number of tangles has a maximum value with yarn speed changing. For two yarn directions of entering and leaving yarn guide of interalcer, the yarn speed for the maximum number of tangles is 400 m/rain and 600 m/rain, respectively. The number of tangles changes with air pressure and yarn speed for two yarn directions is compared.     

A novel coupling configuration for thermoacoustically-driven pulse tube coolers： Acoustic amplifier

A thermoacoustically-driven pulse tube cooler has re-cently reached temperatures below 77 K[1] by modifying the resonance tube of the thermoacoustic engine and the hot end phase adjuster of the pulse tube cooler. Normally, the pulse tube cooler is directly connected with the ther-moacoustic engine so that pressure ratio available to the pulse tube cooler is limited by what the thermoacoustic engine can provide[1,2]. To obtain temperatures below 70 K, the high frequency pulse tube cooler genera…     

High pressure supramolecular chemistry

High pressure supramolecular chemistry is a developing interdisciplinary field. The use of high pressure for the study and fabrication of supramolecular systems has been explored only in the past few years. Such studies would shed light on the nature of the structures and functions of the complex supramolecular architectures. In this review, systematic progress made in this field is introduced based on the recent achievements. Special attention is paid to pressure-driven novel properties and functions of supramolecular assemblies resulting from the changes of molecular conformations, intermolecular interactions and supramolecular arrangements under high pressure.     

EXPERIMENTAL DEVICE OF THE HIGH HUMIDITY AIR ELECTROSTAT4C ELIMINATOR

As for electrostatic elimination there are many means. But the high humidity air electrostatic eliminator has simple, efficient, lightproof and fireproof etc. advantages. Thus it is of ten used in some industrial enterprises. The aim of this paper is to introduce an experimental device of high humidity air electrostatic eliminator and its principle and experimental data.     

Modeling the impact of Australian Plate drift on Southern Hemisphere climate and environment

Using a global atmosphere-ocean coupled model with the present-day and 14 MaB.P. oceanic topography respectively, two experiments are implemented to investigate the effect of different locations of Australian Plate on the atmospheric circulation in middle-high latitudes of the Southern Hemisphere. The results show that when Australian Plate lay south at 14 MaB.P., both anticyclone circulations in the subtropical oceans and cyclone circulation around 60°-70°S are strengthened. Subtropical highs and circumpolar low pressure appear stronger, which results in much stronger Antarctic Oscillation and shorter period of Antarctic Oscillation Index （AOI） at 14 MaB.P. The rainfall and the surface air temperature also change correspondingly.The precipitation decreases around 40°S and increases around 60°- 70°S, and the surface air temperature rises in high latitudes of the South Pacific and descends over the Weddell Sea and its north side. Besides, due to the changes of the temperatures and winds, Antarctic sea ice coverage also changes with its increasing in the Ross Sea and its west regions and decreasing in the Weddell Sea.     

The seasonal cycle of interhemispheric oscillations in mass field of the global atmosphere

Using the daily and monthly data of surface air pressure, meridional wind, radiation and water vapor from NCEP/NCAR reanalysis for the period of 1979―2006, we have examined the seasonal variations of the interhemispheric oscillations (IHO) in mass field of the global atmosphere. Our results have demonstrated that IHO as observed in surface air pressure field shows the distinct seasonal cycle. This seasonal cycle has an interhemispheric seesaw structure with comparable annual ranges of surface air pressure in the Southern and Northern Hemispheres. Mass of water vapor changes out-of-phase between the Southern and Northern Hemispheres, showing clearly a seasonal cycle with its annual range almost equivalent to annual range of the IHO seasonal cycle. Amazingly, the cross-equatorial flow is found to be induced by annual changes in water vapor mass as a response of the atmosphere to seasonal cycle of forcing from hemispheric net surface short- and long-wave radiations. The IHO seasonality exhibits its larger variations in magnitude in mid-latitudes other than in other regions of the globe. Additionally, our results also show that the global air mass is redistributed seasonally not only between the Northern and Southern Hemispheres but also between land and sea. This land-sea air mass redis- tribution induces a zonal pattern of surface air pressure in the Northern Hemisphere but the meridional pattern in the Southern Hemisphere.     

Characteristics and evolution of ore-forming fluids of the Chongjiang copper deposit in the Gangdise porphyry copper belt,Tibet

Petrography, microthermometry, and scanning electron microscope/energy dispersive spectrometer (SEM/EDS) studies were performed on the fluid inclusions in the ore-beating quartz veins and quartz phenocrysts in the porphyry of the Chongjiang porphyry copper deposit. The analyses of the fluid inclusions indicate that the ore-forming fluids were exsolved from magma. They are near-saturated, supercritical, rich in volatile constituents, and have the capture temperature of 362-389℃ and salinities of 17.7wt%- 18.9wt% NaC1 eq. With the decreasing of temperature and pressure, the supercritical fluids were separated into a low salinity vapor phase and a high salinity liquid phase. During quartz-sericitization, the high salinity fluid boiled and separated into a low salinity vapor phase and a high salinity liquid phase. The high salinity inclusions that formed in the boiling process had daughter mineral melting temperatures higher than the homogenization temperatures of the vapor and liquid phases. The late fluids that are responsible for argillization are of lower temperature and salinity.     

Development of Polymer Electrolyte Membranes for High Temperature PEFCs

1 Introduction During the last decades the research has been devoted to the development of non-perfluorinated polymers[1,2], as an alternative to commercial perfluorosulphonic membranes. There are several non-perfluorinated materials suitable for these systems that should have as a fundamental requirement a good thermal stability of the original polymer. The studied polymers consist of polyaromatic or polyetherocyclic repeat units like polyetheretherketone (PEEK). Many papers have been published about the properties of this class of polymers, especially for PEEK functionalisation by the insertion of sulphonic groups[3] and for the preparation of composite membranes[4], even if they generally show lower proton conductivity than Nafion at the requested operative temperatures.Polymer inorganic composite membranes are interesting because many of the inorganicadditives used are able to operate at much higher temperatures than pure polymers. Some of the possible advantages of incorporating inorganic compounds into composite membranes include, enhanced proton conductivity, water retention at hightemperatures, and mechanical resistance.     

Validating global hydrological models by ground and space gravimetry

The long-term continuous gravity observations obtained by the superconducting gravimeters (SG) at seven globally-distributed stations are comprehensively analyzed. After removing the signals related to the Earth’s tides and variations in the Earth’s rotation, the gravity residuals are used to describe the seasonal fluctuations in gravity field. Meanwhile, the gravity changes due to the air pressure loading are theoretically modeled from the measurements of the local air pressure, and those due to land water...     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.