最终范数连续半群的一些性质

主要讨论了Banach空间中当t＞t0（t0≥0）时，最终范数连续半群{T（t）│t≥0}的性质，给出了最终范数连续半群无穷小生成元的一个谱分布性质．主要定理如下：设{T（t）lt≥0}是Banach空间X上的C0半群，A是其无穷小生成元，ω0=inft＞0（1/t1n‖T（t）‖）．若T（t）关于t＞α≥0是最终范数连续的，则存在一个减函数φ：（0，∞）→R，满足φ（M）→-∞（M→∞）且S={λ∈C│Reλ≥φ（│Imλ│） }lReA≥P（1ImAl）}包括于ρ（A），其中ρ（A）为A的预解集．     

一类时滞方程的适定性

通过设立半群的方法，研究了形如：x＇（t）=A0x（t）＋∑i=1^pAix（t—hi），t≥0的一类时滞方程的解的适定性，其中A0是Banach空间X上解析半群{e^A0t，t≥0}的无穷小生成元，Ai（i=1，2，…，p）均为（γ—A0）^α-相对有界线性算子，其中0〈α〈1，γ〉ω0（A0）为解析半群{e^A0t，t≥0}的增长界。     

n阶α次积分C半群的逼近

借助算子半群逼近的相关理论及经典算子理论的研究方法,对算子A,An分别次生成的n阶α次积分C半群{T(t)}t≥0和{Tn(t)}t≥0,在一定条件下,当Tn(t)x逼近于T(t)x,则有Rc(λ,An)x逼近于Rc(λ,A)x,反之也成立.从而丰富了n阶α次积分C半群的研究内容.     

观测泛函的无限时p-容许性

引入无界观测泛函的无限时p-容许性概念，讨论了相关性质，当C0-半群{T(f)}t≥0指数稳定的，证明了无限时p-容许性与p-容许性是等价的．最后用具体的例子给出了一个无界观测泛函的无限时p-容许性。     

指数有界双连续n阶α次积分C半群的逼近

利用经典算子半群理论中的研究方法，基于双连续n阶α次积分C半群的生成定理，讨论了指数有界双连续n阶α次积分C半群的逼近定理。{T(t)}_t≥0，{Tn(t)}_t≥0分别是由A、A_n次生成的指数有界双连续n阶α次积分C半群，在一定条件下，可以得到Ra(λ，A_n) x→Ra(λ，A) x与T_n(t)x→T (t)x等价。研究结果推广了n阶α次积分C半群相关的逼近定理。     

一类线性算子族范数连续的刻划条件

设A和B分别生长C1-正则半群{(St)}t≥0和C2-正则半群{(Tt)}t≥0,令△(t)=T(t)-S(t),在Hilbert空间下,本文给出了用生成元A和B的预解式来判定算子族△(t)范数连续的判定定理。     

Boo1e代数与双格半群

指出Boole代数类是双格半群类的真子类；有限Boole代数类是F-格半群类的真子类；当格群是Boole代数时，该格群一定是平凡的，同时给出一个双格半群(S， ，≤)是Boole代数的充要条件是：1．存在0∈S，任意x∈S，0≤x，0 x=x 0=x；2．任意x，y∈S，(x⊙y) x=x；3．任意x∈S，存在x′∈S，x⊙x′=x；4．任意x，y,x∈S，x xy=x xz，x⊙y推出x=y.     

(C0)类等度连续半群的无穷小生成元的特征

主要讨论在局部凸线性拓扑空间上的(C0)类等度连续半群{T(t):t≥0}诱导的C0-半群拓扑意义下,{T(t):t≥0}的一些基本性质,以及(C0)类等度连续半群{T(t):t≥0}在C0-半群拓扑意义下以及原拓扑意义下的无穷小生成元之间的关系.     

关于最终一致连续半群特征的一个注

设{T(t)}是Hilbert空间H上的一个有界线性算子C0半群,A是其无穷小母元,α0满足α0＞limt→+∞||T(t)||/t.本文证明了在上述条件下,当t＞t0(t0≥0)时T(t)按一致算子拓扑连续的充分必要条件是,对任意的δ＞0,lim u→+∞ x∈H,sup||x||=1,t＞t0+δ||∫|τ|≥αeitτR(α0+iτ,A)xdτ||=0.     

可微C0-半群的谱

利用可微C0-半群的若干性质给出了可微C0-半群{T(t):t≥0}的生成元A的谱与AT(t)的谱之间的关系.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to     

《Chinese Science Bulletin》SUBJECT INDEX TO VOLUME 59(2014)

正~~     

An on-line scaling method for improving scalability of a database cluster

The explosive growth of the Internet and database applications has driven database to be more scalable and available, and able to support on-line scaling without interrupting service. To support more client's queries without downtime and degrading the response time, more nodes have to be scaled up while the database is running. This paper presents the overview of scalable and available database that satisfies the above characteristics. And we propose a novel on-line scaling method. Our method improves the existing on-line scaling method for fast response time and higher throughputs. Our proposed method reduces unnecessary network use, i.e. , we decrease the number of data copy by reusing the backup data. Also, our on-line scaling operation can be processed parallel by selecting adequate nodes as new node. Our performance study shows that our method results in significant reduction in data copy time.     

An improved R-tree based on childnode''s probability

R-Tree is a good structure for spatial searching. But in this indexing structure,either the sequence of nodes in the same level or sequence of traveling these nodes when queries are made is random. Since the possibility that the object appears in different MBR which have the same parents node is different, if we make the subnode who has the most possibility be traveled first, the time cost will be decreased in most of the cases. In some case, the possibility of a point belong to a rectangle will shows direct proportion with the size of the rectangle. But this conclusion is based on an assumption that the objects are symmetrically distributing in the area and this assumption is not always coming into existence. Now we found a more direct parameter to scale the possibility and made a little change on the structure of R-tree, to increase the possibility of founding the satisfying answer in the front sub trees. We names this structure probability based arranged R-tree (PBAR-tree).     

Integrating GIS Web services based on mediating architecture

The geographic information service is enabled by the advancements in general Web service technology and the focused efforts of the OGC in defining XML-based Web GIS service. Based on these models, this paper addresses the issue of services chaining,the process of combining or pipelining results from several interoperable GIS Web Services to create a customized solution. This paper presents a mediated chaining architecture in which a specific service takes responsibility for performing the process that describes a service chain. We designed the Spatial Information Process Language (SIPL) for dynamic modeling and describing the service chain, also a prototype of the Spatial Information Process Execution Engine (SIPEE) is implemented for executing processes written in SIPL. Discussion of measures to improve the functionality and performance of such system will be included.