Evolution of magma-poor continental margins from rifting to seafloor spreading

The rifting of continents involves faulting (tectonism) and magmatism, which reflect the strain-rate and temperature dependent processes of solid-state deformation and decompression melting within the Earth. Most models of this rifting have treated tectonism and magmatism separately, and few numerical simulations have attempted to include continental break-up and melting, let alone describe how continental rifting evolves into seafloor spreading. Models of this evolution conventionally juxtapose continental and oceanic crust. Here we present observations that support the existence of a zone of exhumed continental mantle, several tens of kilometres wide, between oceanic and continental crust on continental margins where magma-poor rifting has taken place. We present geophysical and geological observations from the west Iberia margin, and geological mapping of margins of the former Tethys ocean now exposed in the Alps. We use these complementary findings to propose a conceptual model that focuses on the final stage of continental extension and break-up, and the creation of a zone of exhumed continental mantle that evolves oceanward into seafloor spreading. We conclude that the evolving stress and thermal fields are constrained by a rising and narrowing ridge of asthenospheric mantle, and that magmatism and rates of extension systematically increase oceanward.     

Lower-crustal intrusion on the North Atlantic continental margin

When continents break apart, the rifting is sometimes accompanied by the production of large volumes of molten rock. The total melt volume, however, is uncertain, because only part of it has erupted at the surface. Furthermore, the cause of the magmatism is still disputed-specifically, whether or not it is due to increased mantle temperatures. We recorded deep-penetration normal-incidence and wide-angle seismic profiles across the Faroe and Hatton Bank volcanic margins in the northeast Atlantic. Here we show that near the Faroe Islands, for every 1 km along strike, 360-400 km(3) of basalt is extruded, while 540-600 km(3) is intruded into the continent-ocean transition. We find that lower-crustal intrusions are focused mainly into a narrow zone approximately 50 km wide on the transition, although extruded basalts flow more than 100 km from the rift. Seismic profiles show that the melt is intruded into the lower crust as sills, which cross-cut the continental fabric, rather than as an 'underplate' of 100 per cent melt, as has often been assumed. Evidence from the measured seismic velocities and from igneous thicknesses are consistent with the dominant control on melt production being increased mantle temperatures, with no requirement for either significant active small-scale mantle convection under the rift or the presence of fertile mantle at the time of continental break-up, as has previously been suggested for the North Atlantic Ocean.     

Magma-maintained rift segmentation at continental rupture in the 2005 Afar dyking episode

Seafloor spreading centres show a regular along-axis segmentation thought to be produced by a segmented magma supply in the passively upwelling mantle. On the other hand, continental rifts are segmented by large offset normal faults, and many lack magmatism. It is unclear how, when and where the ubiquitous segmented melt zones are emplaced during the continental rupture process. Between 14 September and 4 October 2005, 163 earthquakes (magnitudes greater than 3.9) and a volcanic eruption occurred within the approximately 60-km-long Dabbahu magmatic segment of the Afar rift, a nascent seafloor spreading centre in stretched continental lithosphere. Here we present a three-dimensional deformation field for the Dabbahu rifting episode derived from satellite radar data, which shows that the entire segment ruptured, making it the largest to have occurred on land in the era of satellite geodesy. Simple elastic modelling shows that the magmatic segment opened by up to 8 m, yet seismic rupture can account for only 8 per cent of the observed deformation. Magma was injected along a dyke between depths of 2 and 9 km, corresponding to a total intrusion volume of approximately 2.5 km3. Much of the magma appears to have originated from shallow chambers beneath Dabbahu and Gabho volcanoes at the northern end of the segment, where an explosive fissural eruption occurred on 26 September 2005. Although comparable in magnitude to the ten year (1975-84) Krafla events in Iceland, seismic data suggest that most of the Dabbahu dyke intrusion occurred in less than a week. Thus, magma intrusion via dyking, rather than segmented normal faulting, maintains and probably initiated the along-axis segmentation along this sector of the Nubia-Arabia plate boundary.     

A mechanism to thin the continental lithosphere at magma-poor margins

Where continental plates break apart, slip along multiple normal faults provides the required space for the Earth's crust to thin and subside. After initial rifting, however, the displacement on normal faults observed at the sea floor seems not to match the inferred extension. Here we show that crustal thinning can be accomplished in such extensional environments by a system of conjugate concave downward faults instead of multiple normal faults. Our model predicts that these concave faults accumulate large amounts of extension and form a very thin crust (< 10 km) by exhumation of mid-crustal and mantle material. This transitional crust is capped by sub-horizontal detachment surfaces over distances exceeding 100 km with little visible deformation. Our rift model is based on numerical experiments constrained by geological and geophysical observations from the Alpine Tethys and Iberia/Newfoundland margins. Furthermore, we suggest that the observed transition from broadly distributed and symmetric extension to localized and asymmetric rifting is directly controlled by the existence of a strong gabbroic lower crust. The presence of such lower crustal gabbros is well constrained for the Alpine Tethys system. Initial decoupling of upper crustal deformation from lower crustal and mantle deformation by progressive weakening of the middle crust is an essential requirement to reproduce the observed rift evolution. This is achieved in our models by the formation of weak ductile shear zones.     

Sequential faulting explains the asymmetry and extension discrepancy of conjugate margins

During early extension, cold continental lithosphere thins and subsides, creating rift basins. If extension continues to final break-up, the split and greatly thinned plates subside deep below sea level to form a conjugate pair of rifted margins. Although basins and margins are ubiquitous structures, the deformation processes leading from moderately extended basins to highly stretched margins are unclear, as studies consistently report that crustal thinning is greater than extension caused by brittle faulting. This extension discrepancy might arise from differential stretching of brittle and ductile crustal layers, but that does not readily explain the typical asymmetric structure of conjugate margins-in cross-section, one margin displays gradual thinning accompanied by large faults, and the conjugate margin displays abrupt thinning but smaller-scale faulting. Whole-crust detachments, active from early in the rifting, could in theory create both thinning and asymmetry, but are mechanically problematical. Furthermore, the extension discrepancy occurs at both conjugate margins, leading to the apparent contradiction that both seem to be upper plates to a detachment fault. Alternative models propose that much brittle extension is undetected because of seismic imaging limitations caused either by subseismic-resolution faulting, invisible deformation along top-basement 100-km-scale detachments or the structural complexity of cross-cutting arrays of faults. Here we use depth-migrated seismic images to accurately measure fault extension and compare it with crustal thinning. The observations are used to create a balanced kinematic model of rifting that resolves the extension discrepancy by producing both fault-controlled crustal thinning which progresses from a rift basin to the asymmetric structure, and extreme thinning of conjugate rifted margins. Contrary to current wisdom, the observations support the idea that thinning is to a first degree explained by simple Andersonian faulting that is unambiguously visible in seismic data.     

Lithospheric structure of the Rio Grande rift

A high-resolution, regional passive seismic experiment in the Rio Grande rift region of the southwestern United States has produced new images of upper-mantle velocity structure and crust-mantle topography. Synthesizing these results with geochemical and other geophysical evidence reveals highly symmetric lower-crustal and upper-mantle lithosphere extensional deformation, suggesting a pure-shear rifting mechanism for the Rio Grande rift. Extension in the lower crust is distributed over a region four times the width of the rift's surface expression. Here we propose that the laterally distributed, pure shear extension is a combined effect of low strain rate and a regionally elevated geotherm, possibly abetted by pre-existing lithospheric structures, at the time of rift initiation. Distributed extension in the lower crust and mantle has induced less concentrated vertical mantle upwelling and less vigorous small-scale convection than would have arisen from more localized deformation. This lack of highly focused mantle upwelling may explain a deficit of rift-related volcanics in the Rio Grande rift compared to other major rift systems such as the Kenya rift.     

南海成因：岩石圈破裂与俯冲带相互作用新认识

 南海深部计划与国际大洋钻探航次取得了一系列创新进展与重大突破：1）发现南海陆缘岩石圈减薄之初未出现地幔蛇纹岩出露，且岩浆迅速出现；2）新提出南海不是“小大西洋”，而是“板缘张裂”盆地，与经典的大西洋型“板内张裂”陆缘模式不同；3）揭示南海受到俯冲带的强烈控制，提出俯冲诱发地幔上涌并影响南海岩浆活动。     

东北地区白垩纪断陷盆地群形成模式及其油气地质意义

东北地区白垩系断陷盆地群是在古生代褶皱造山带的基础上发展起来的早白垩世宽范围火山断陷盆地群,经历了一个完整的拉张断陷到挤压回返的构造旋回,伸展作用强烈,坳陷广泛发育,具有构造样式复杂、垒堑相间、断超结构的特点。郯庐断裂带北段在早白垩世发生的左旋走滑运动控制了断裂带两侧盆地的发育。中生代断陷盆地群是在较新的地壳上发展起来的,中酸性火山活动强烈,在松辽盆地和海拉尔盆地存在两个岩石圈减薄区。断陷盆地群具有相似的构造特点,火山断陷作用强烈。在前人研究的基础上,证实了松辽盆地存在裂前隆起。本文从裂谷成盆模式模式入手,认为断陷盆地群东部是窄裂谷成盆模式,西部及中部是宽裂谷成盆模式,认为东北断陷盆地群是在幔隆过程中形成。     

Mantle compensation of active metamorphic core complexes at Woodlark rift in Papua New Guinea

In many highly extended rifts on the Earth, tectonic removal of the upper crust exhumes mid-crustal rocks, producing metamorphic core complexes. These structures allow the upper continental crust to accommodate tens of kilometres of extension, but it is not clear how the lower crust and underlying mantle respond. Also, despite removal of the upper crust, such core complexes remain both topographically high and in isostatic equilibrium. Because many core complexes in the western United States are underlain by a flat Moho discontinuity, it has been widely assumed that their elevation is supported by flow in the lower crust or by magmatic underplating. These processes should decouple upper-crust extension from that in the mantle. In contrast, here we present seismic observations of metamorphic core complexes of the western Woodlark rift that show the overall crust to be thinned beneath regions of greatest surface extension. These core complexes are actively being exhumed at a rate of 5-10 km Myr(-1), and the thinning of the underlying crust appears to be compensated by mantle rocks of anomalously low density, as indicated by low seismic velocities. We conclude that, at least in this case, the development of metamorphic core complexes and the accommodation of high extension is not purely a crustal phenomenon, but must involve mantle extension.     

Magma-assisted rifting in Ethiopia

The rifting of continents and evolution of ocean basins is a fundamental component of plate tectonics, yet the process of continental break-up remains controversial. Plate driving forces have been estimated to be as much as an order of magnitude smaller than those required to rupture thick continental lithosphere. However, Buck has proposed that lithospheric heating by mantle upwelling and related magma production could promote lithospheric rupture at much lower stresses. Such models of mechanical versus magma-assisted extension can be tested, because they predict different temporal and spatial patterns of crustal and upper-mantle structure. Changes in plate deformation produce strain-enhanced crystal alignment and increased melt production within the upper mantle, both of which can cause seismic anisotropy. The Northern Ethiopian Rift is an ideal place to test break-up models because it formed in cratonic lithosphere with minor far-field plate stresses. Here we present evidence of seismic anisotropy in the upper mantle of this rift zone using observations of shear-wave splitting. Our observations, together with recent geological data, indicate a strong component of melt-induced anisotropy with only minor crustal stretching, supporting the magma-assisted rifting model in this area of initially cold, thick continental lithosphere.     

The role of fluids in lower-crustal earthquakes near continental rifts

The occurrence of earthquakes in the lower crust near continental rifts has long been puzzling, as the lower crust is generally thought to be too hot for brittle failure to occur. Such anomalous events have usually been explained in terms of the lower crust being cooler than normal. But if the lower crust is indeed cold enough to produce earthquakes, then the uppermost mantle beneath it should also be cold enough, and yet uppermost mantle earthquakes are not observed. Numerous lower-crustal earthquakes occur near the southwestern termination of the Taupo Volcanic Zone (TVZ), an active continental rift in New Zealand. Here we present three-dimensional tomographic imaging of seismic velocities and seismic attenuation in this region using data from a dense seismograph deployment. We find that crustal earthquakes accurately relocated with our three-dimensional seismic velocity model form a continuous band along the rift, deepening from mostly less than 10 km in the central TVZ to depths of 30-40 km in the lower crust, 30 km southwest of the termination of the volcanic zone. These earthquakes often occur in swarms, suggesting fluid movement in critically loaded fault zones. Seismic velocities within the band are also consistent with the presence of fluids, and the deepening seismicity parallels the boundary between high seismic attenuation (interpreted as partial melt) within the central TVZ and low seismic attenuation in the crust to the southwest. This linking of upper and lower-crustal seismicity and crustal structure allows us to propose a common explanation for all the seismicity, involving the weakening of faults on the periphery of an otherwise dry, mafic crust by hot fluids, including those exsolved from underlying melt. Such fluids may generally be an important driver of lower-crustal seismicity near continental rifts.     

Depth-dependent extension, two-stage breakup and cratonic underplating at rifted margins

Uniform lithospheric extension predicts basic properties of non-volcanic rifted margins but fails to explain other important characteristics. Significant discrepancies are observed at 'type I' margins (such as the Iberia-Newfoundland conjugates), where large tracts of continental mantle lithosphere are exposed at the sea floor, and 'type II' margins (such as some ultrawide central South Atlantic margins), where thin continental crust spans wide regions below which continental lower crust and mantle lithosphere have apparently been removed. Neither corresponds to uniform extension. Instead, either crust or mantle lithosphere has been preferentially removed. Using dynamical models, we demonstrate that these margins are opposite end members: in type I, depth-dependent extension results in crustal-necking breakup before mantle-lithosphere breakup and in type II, the converse is true. These two-layer, two-stage breakup behaviours explain the discrepancies and have implications for the styles of the associated sedimentary basins. Laterally flowing lower-mantle cratonic lithosphere may underplate some type II margins, thereby contributing to their anomalous characteristics.     

塔里木盆地深部构造与震旦纪裂谷

塔里木盆地是一个发育在塔里木反块中部的大型克拉通盆地，它位于一近东西向展布的地幔隆起之上，其地壳厚度为４１～５０ｋｍ。盆地基底结构复杂，由太古界—下元古界深变质岩系和中上元古界浅变质岩系经８００Ｍａ前的热构造事件拼合固结而成。基底四周被深大断裂切割，控制和影响着盆地的形成与演化。震旦纪，岩石圈伸展分裂，塔里木盆地南北缘均为被动大陆边缘，其裂谷作用具有北强南弱东强西弱的特点。因此，在盆地部形成夭折裂谷，盆地西南则表现为克拉通内坳陷     

The influence of ridge migration on the magmatic segmentation of mid-ocean ridges

The Earth's mid-ocean ridges display systematic changes in depth and shape, which subdivide the ridges into discrete spreading segments bounded by transform faults and smaller non-transform offsets of the axis. These morphological changes have been attributed to spatial variations in the supply of magma from the mantle, although the origin of the variations is poorly understood. Here we show that magmatic segmentation of ridges with fast and intermediate spreading rates is directly related to the migration velocity of the spreading axis over the mantle. For over 9,500 km of mid-ocean ridge examined, leading ridge segments in the 'hotspot' reference frame coincide with the shallow magmatically robust segments across 86 per cent of all transform faults and 73 per cent of all second-order discontinuities. We attribute this relationship to asymmetric mantle upwelling and melt production due to ridge migration, with focusing of melt towards ridge segments across discontinuities. The model is consistent with variations in crustal structure across discontinuities of the East Pacific Rise, and may explain variations in depth of melting and the distribution of enriched lavas.     

黄骅拗陷构造运动程式探讨

黄骅拗陷是勃中三叉裂谷系中的一支裂谷,其有地幔隆起,高热流和火山活动频繁有等特征。拗陷中发育着四套构造地层组合,对应着三个构造层次。裂谷盆地的演化经历了三个阶段不同方向的构造运动程式：(1)前裂谷阶段经受印支运动近南北向的挤压作用、燕山早期运动北西—南东向的挤压作用及燕山晚期运动北西西—南东东向的挤压作用等;(2)裂谷阶段经受两期裂陷作用,为北西—南东向和近南北向的引张作用;(3)压裂谷阶段裂谷萎缩引起的垂向下陷运动。     

Mesozoic basin development and its indication of collisional orogeny in the Dabie orogen

The Dabie orogen underwent deep continental subduction, rapid exhumation, and the huge amount of erosion during the Mesozoic. Its tectonic evolution, especially how its evolution was recorded by sedimentary basins at the flanks of the Dabie orogen is one of the most important issues of the world’s attention. These years, newly studies of basin sedimentology, combined with structural geology, have shown a fundamental progress. The overall distribution of different basin types in the orogen indicates that shortening and thrusting at the margins of the orogen from the Late Triassic to the Early Cretaceous controlled the foreland basins, and extension, doming and rifting were initiated in the core of the orogen from the Jurassic to the Early Cretaceous and were expanded to the whole orogen after the Late Cretaceous. Therefore, The Dabie orogen records gradual transition from overall shortening and thrusting to dominantly extension and rift basin formation expanded from its core to its margins, although these shortening and extension overlapped in time from the Jurassic through Early Cretaceous at crustal levels. The unroofing ages of the ultra-high pressure (UHP) metamorphic rocks in the Dabie orogen change from Early Jurassic to Late Jurassic westward. The depth of exhumation increases eastwards. The sediment sources for the Hefei basin are mostly composed of the deeply exhumed, axial Dabie metamorphic complex, and the sediment sources for the Middle Yangtze basin are mostly from cover strata in the southern orogen and related strata with subjacent (i.e. subsequently overthrusted) Mianlue suture belt. Geodynamic analysis represents that continental collision between the North China Block and the South China Block along the Shangdan and Mianlue sutures, subsequently northwestward progradation of the Jiangnan fold and thrust belt, and the underthrusting of the North China Block along the Northern Boundary Fault of Qinling Range led to crustal thickening, gravitational spreading and balanced rebound of the resultant thick crustal welt, and multi-episodic exhumation of the HP/UHP metamorphic rocks. The future studies by the methods of tracing the Dabie orogeny through deposition in the marginal basins should focus on eastward extension of the Mianlue suture, thrust and overlap of the Dabie HP/UHP metamorphic block on different lithotectonic zones and basins along the northern South China Block, the structural framework of the source area of the basins in the syn-depositional stage, the basin lateral extension, huge amount of erosion and sediment transportation from the Dabie blanket and basement rocks, and recovery of subducted and re- moved structural units within the Dabie orogen, etc.     

Spreading rate dependence of gravity anomalies along oceanic transform faults

Mid-ocean ridge morphology and crustal accretion are known to depend on the spreading rate of the ridge. Slow-spreading mid-ocean-ridge segments exhibit significant crustal thinning towards transform and non-transform offsets, which is thought to arise from a three-dimensional process of buoyant mantle upwelling and melt migration focused beneath the centres of ridge segments. In contrast, fast-spreading mid-ocean ridges are characterized by smaller, segment-scale variations in crustal thickness, which reflect more uniform mantle upwelling beneath the ridge axis. Here we present a systematic study of the residual mantle Bouguer gravity anomaly of 19 oceanic transform faults that reveals a strong correlation between gravity signature and spreading rate. Previous studies have shown that slow-slipping transform faults are marked by more positive gravity anomalies than their adjacent ridge segments, but our analysis reveals that intermediate and fast-slipping transform faults exhibit more negative gravity anomalies than their adjacent ridge segments. This finding indicates that there is a mass deficit at intermediate- and fast-slipping transform faults, which could reflect increased rock porosity, serpentinization of mantle peridotite, and/or crustal thickening. The most negative anomalies correspond to topographic highs flanking the transform faults, rather than to transform troughs (where deformation is probably focused and porosity and alteration are expected to be greatest), indicating that crustal thickening could be an important contributor to the negative gravity anomalies observed. This finding in turn suggests that three-dimensional magma accretion may occur near intermediate- and fast-slipping transform faults.     

试论峨眉山玄武岩喷发构造环境——微量元素地球化学证据

本文讨论了峨眉山玄武岩微量元素地球化学和锶、钕同位素特征,并与不同构造环境火成岩进行了对比。研究表明,峨眉山玄武岩显示了次大陆地幔富集的特征和地幔部分熔融、分异结晶的成因特点,喷发在大陆边缘裂谷构造环境。这一结论与其他地质研究成果的一致性,说明微量元素地球化学特征可以提供基性岩浆喷发构造环境的重要信息。本文还提出了玄武岩浆喷发、裂谷作用可能的动力机制。     

Eruptions arising from tidally controlled periodic openings of rifts on Enceladus

In 2005, plumes were detected near the south polar region of Enceladus, a small icy satellite of Saturn. Observations of the south pole revealed large rifts in the crust, informally called 'tiger stripes', which exhibit higher temperatures than the surrounding terrain and are probably sources of the observed eruptions. Models of the ultimate interior source for the eruptions are under consideration. Other models of an expanding plume require eruptions from discrete sources, as well as less voluminous eruptions from a more extended source, to match the observations. No physical mechanism that matches the observations has been identified to control these eruptions. Here we report a mechanism in which temporal variations in tidal stress open and close the tiger-stripe rifts, governing the timing of eruptions. During each orbit, every portion of each tiger stripe rift spends about half the time in tension, which allows the rift to open, exposing volatiles, and allowing eruptions. In a complementary process, periodic shear stress along the rifts also generates heat along their lengths, which has the capacity to enhance eruptions. Plume activity is expected to vary periodically, affecting the injection of material into Saturn's E ring and its formation, evolution and structure. Moreover, the stresses controlling eruptions imply that Enceladus' icy shell behaves as a thin elastic layer, perhaps only a few tens of kilometres thick.     

稳健性结构设计的广义有效性

该文用基于实验设计法的稳健性结构设计方法,对结构进行了广义和狭义的稳健性设计。用2水平值描述不确定参量的变化幅,设计变量则设定为3水平值,以利用实验设计法。通过变化稳健性设计的目标函数中权重系数值,实现广义和狭义的稳健性设计。以典型的三桁架超静定结构问题为算例,结果表明广义的稳健性设计目标下结构的稳健性与蒙特卡罗拟法所得可靠性结果是一致的,而狭义的稳健性结构设计则得不到这种有效性。