超大径圆钢机械连接接头试验研究

介绍超大径圆钢(Φ75/45A)机械连接接头试验方法和特点,本试验组研制的大吨位加力装置,解决了超大径圆钢机械连接接头变形性能单向拉伸试验的难题,填补了国内该项试验的空白.对试验测取的数据进行对比分析,其机械连接接头抗拉性能指标满足<钢筋机械连接技术规程>JGJ 107(2007年征求意见稿)的相关技术要求.     

Ф75 圆钢机械连接接头型式检验研究

对Ф75 mm圆钢机械连接接头进行了型式检验.目前我国还没有出台大直径圆钢机械连接接头型式检验技术规程,参照<钢筋机械连接通用技术规程>JGJ 107-2003,对试验过程和方法进行了有意义的尝试和探索,成功地完成了圆钢机械连接接头型式检验各单项内容,由于该圆钢直径特别大,在某种意义上填补了国内该项试验的空白.     

管桩-塔脚机械型连接接头及其轴向性能分析

为解决传统桩-塔脚现浇型连接接头存在的受拉性能差、施工周期长等问题，提出一种新型预应力混凝土高强管桩（Precast high-strength concrete pile，PHC） 管桩-塔脚机械型连接接头。先通过理论分析对新型连接接头中的圆筒和腹板最小厚度进行确定，再利用ABAQUS对其进行轴向性能有限元分析，并将其与传统现浇型连接接头进行对比。研究结果表明：当圆筒厚度为10 mm、腹板厚度为10 mm时，其能满足单项承载力要求、整体承载力要求及经济性要求。在受压荷载下，传统现浇型连接接头最终因塔脚全域受压屈曲而破坏；机械型连接接头最终因连接主体中的圆筒和腹板全域屈服而破坏，其可满足同型号管桩-塔脚的受压设计承载力要求，且可选择增大圆筒厚度和腹板厚度来提高整体受压承载力。在受拉荷载下，现浇型连接接头最终因预埋件中锚筋与混凝土锚固力不足而发生拔出破坏，拉伸位移均为预埋件刚体位移，连接接头具有很差的延性。机械型连接接头最终因啮合式连接接头中的连接销受拉变形过大而破坏，其受拉承载力远大于现浇型受拉承载力且具有较好的延性。     

铝钢电阻单元焊接头力学性能模拟

电阻单元焊接头综合了熔化焊和机械连接的效果,其力学性能由2种连接方式共同决定,而三维有限元模型是研究铝钢电阻单元焊接头力学性能的有效手段.通过金相试验接头宏观形貌,结合硬度实验和经验公式确定接头各区域材料的力学性能,以此作为模型输入.通过该模型,对试验过程中接头断面的几何形貌演化规律以及应力分布特征进行了分析,并结合试验结果研究了接头的失效模式,为揭示接头失效机理提供了借鉴.     

结构钢厚板焊接接头CTOD断裂韧性试验与分析

依据BS7448试验标准,探讨了在低温下超大尺寸焊接接头裂纹尖端张开位移（CTOD）的试验及结果。测试了在0℃下埋弧焊工艺的大厚焊接接头焊缝金属和热影响区的CTOD断裂韧性,试验表明,试件均满足DNV标准规定的最小特征CTOD值为0.15mm的要求。试验结果为评价大尺寸焊接接头的焊后热处理规范提供了依据,95mm厚的D36钢板埋弧焊焊焊接接头可以在不进行焊后热处理的情况下使用,这对于海洋钢结构焊接来说,将大幅降低建造成本,具有巨大的经济意义。     

复合材料构件机械连接接头破坏模式与机理

针对纵横向性能差异较大的纤维增强复合材料构件采用机械连接时,材料的弱方向也可能承受较大拉力作用的现实,设计了6组对比试验,研究了单螺栓连接时接头边距/孔径比的变化对其破坏模式与破坏荷载的影响规律并结合有限元对破坏机理进行了分析。结果表明:材料弱方向受拉的复合材料机械连接接头极容易发生孔边拉断破坏;增大边距/孔径比并不能控制接头不发生孔边拉断破坏,并且接头破坏荷载随边距/孔径比的增大逐渐趋于稳定。复合材料的弹脆性力学特点、孔边应力集中以及孔边应力分布随边距/孔径比的增大趋于稳定是以上试验现象发生的本质原因。     

机械连接增强型预应力混凝土离心桩的耐久性能研究

介绍了一种由插接式接桩扣及预制件连接的增强型预应力混凝土离心桩,该接桩技术取消了传统接桩使用的连接钢板.通过对经加速劣化处理的管桩进行抗拉,抗剪试验以及有限元软件模拟抗弯试验对该接头进行论证,与传统焊接接头进行对比,发现该机械连接技术具有安全环保,快速便捷,耐久性好,经济效益显著等特点.     

压力对T91钢管瞬时液相扩散连接的影响

在1230～1260℃，0—5MPa下，采用氩气保护，以镍基合金中间层对T91钢管进行了瞬时液相扩散连接（TLP）．运用对比试验分析了压力对接头显微组织和力学性能的影响．结果表明：无压力连接时，TLP接头几乎没有塑性，显微组织与母材差距很远．得出在对T91钢管进行TLP连接时，压力为一必需参数且存在最佳范围．     

钢筋机械连接接头检验评定问题的研究

钢筋机械连接是通过钢筋与连接件的机械咬合作用或钢筋端面的承压作用,将一根钢筋中的力传递至另一根钢筋的连接方法。目前常用的钢筋机械连接接头类型有：套筒挤压接头、锥螺纹接头、镦粗直螺纹接头、滚轧直螺纹接头、熔融金属充填接头与水泥灌浆充填接头等。对于闪光对焊、电弧焊、电渣压力焊与气压焊等在建设工程中常用的焊接方式,除电渣压力焊对HRB335与HRB400牌号钢筋适用的最大直径为32mm外,其余的均为40mm。但在实际应用中,对于直径为28mm及其以上的钢筋,其焊接性能很不稳定。     

剥肋滚压直螺纹机械连接技术在我区的适宜性

大直径钢筋机械连接技术是建设部推广的十项新技术之一,钢筋等强度剥肋滚压直螺纹连接是钢筋等强度机械连接的最新技术,其工艺原理是利用螺纹成形机将钢筋接头端部的纵横肋剥除后将其滚压成直螺纹丝头,并通过专用套筒连成一体组成一个机械接头.     

Markedness and its Interpretation in Language Use

Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.     

Lower Paleozoic oil relationships within Williston Basin, Canada

The Williston Basin is a significant petroleum province, containing oil production zones that include the Middle Cambrian to Lower Ordovician, Upper Ordovician, Middle Devonian, Upper Devonian and Mississippian and within the Jurassic and Cretaceous. The oils of the Williston Basin exhibit a wide range of geochemical characteristics defined as "oil families", although the geochemical signature of the Cambrian Deadwood Formation and Lower Ordovician Winnipeg reservoired oils does not match any "oil family". Despite their close stratigraphic proximity, it is evident that the oils of the Lower Palaeozoic within the Williston Basin are distinct. This suggests the presence of a new "oil family" within the Williston Basin. Diagnostic geochemical signatures occur in the gasoline range chromatograms, within saturate fraction gas chromatograms and biomarker fingerprints. However, some of the established criteria and cross-plots that are currently used to segregate oils into distinct genetic families within the basin do not always meet with success, particularly when applied to the Lower Palaeozoic oils of the Deadwood and Winnipeg Formation.     

An Analysis of Catherine＇s Character——Wuthering Heights

Wuthering Heights, Emily Bronte＇s only novel, was published in December of 1847 under the pseudonym Ellis Bell. The book did not gain immediate success, but it is now thought one of the finest novels in the English language. Catherine is the key character of this masterpiece, because everybody and everything center on her though she had a short life. We can understand this masterpiece better if we know Catherine well.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

Design and analysis of generic LBS application developing platform

Location based services is promising due to its novel working style and contents.A software platform is proposed to provide application programs of typical location based services and support new applications developing efficiently. The analysis shows that this scheme is easy implemented, low cost and adapt to all kinds of mobile nework system.     

橡胶颗粒沥青混合料低温抗裂性试验研究

以AC-13级配为基础,将橡胶颗粒代替部分集料掺入混合料中,以低温弯曲试验为评价方法对不同橡胶颗粒掺量下沥青混合料的低温抗裂性进行研究,并引入应变能密度值对混合料的低温抗裂性进行综合评价.试验结果表明:橡胶颗粒沥青混合料试件的破坏微应变均超过2 300,满足冬寒区的技术指标;无论是否掺加橡胶颗粒,随着温度的下降,沥青混合料破坏时的最大弯拉强度增大,弯拉应变降低,劲度模量增大;弯曲应变能密度在胶粒掺量为1%左右时具有较大的弯曲应变能密度值,此时橡胶颗粒沥青混合料具有较好的低温抗裂性.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

低渗透非均质砂岩油藏启动压力梯度研究

理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。     

Quantitative trait loci （QTLs） for quality traits related to protein and starch in wheat

Quality traits in wheat （Triticum aestirum L.） were studied by quantitative trait locus （QTL） analysis in a recombinant inbred line （RIL） population, a set of 131 lines derived from Chuan 35050 × Shannong 483 cross （ChSh）. Grains from RILs were assayed for 21 quality traits related to protein and starch. A total of 35 putative QTLs for 19 traits with a single QTL explaining 7.99-40.52% of phenotypic variations were detected on 10 chromosomes, 1D, 2A, 2D, 3B, 3D, 5A, 6A, 6B, 6D, and 7B. The additive effects of 30 QTLs were positive, contributed by Chuan 35050, the remaining 5 QTLs were negative with the additive effect contributed by Shannong 483. For protein traits, 15 QTLs were obtained and most of them were located on chromosomes 1 D, 3B and 6D, while 20 QTLs for starch traits were detected and most of them were located on chromosomes 3D, 6B and 7B. Only 7 QTLs for protein and starch traits were co-located in three regions on chromosomes 1D, 2A and 2D. These protein and starch trait QTLs showed a distinct distribution pattern in certain regions and chromosomes. Twenty-two QTLs were clustered in 6 regions of 5 chromosomes. Two QTL clusters for protein traits were located on chromosomes 1D and 3B, respectively, three clusters for starch traits on chromosomes 3D, 6B and 7B, and one cluster including protein and starch traits on chromosome 1D.     

On Tragic Consciousness In The Works By Ernest Hemingway

As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.