播娘蒿子叶及下胚轴诱导再生植珠的研究

用播娘蒿种子，在附加６－ＢＡ０．５～１．０ｍｇ／Ｌ＋ＮＡＡ０．１ｍｇ／Ｌ的ＭＳ培养基上获得无菌苗，幼苗的下胚轴在含６－ＢＡ０．１ｍｇ／Ｌ＋ＮＡＡ０．５ｍｇ／Ｌ的ＭＳ培养基上出愈情况最佳，将来自下胚轴的愈伤组织培养于含有６－ＢＡ２．０ｍｇ／Ｌ＋ＮＡＡ０．２ｍｇ／Ｌ的ＭＳ培养基上分化出的丛生芽状态最好，最佳生根培养基为１／２ＭＳ＋ＩＢＡ０．５ｍｇ／Ｌ＋ＮＡＡ０．０５ｍｇ／Ｌ．     

播娘蒿子叶及下胚轴诱导再生植株的研究

用揪娘嵩种子,在附加６－ＢＡ０．５～１．０ｍｇ／Ｌ＋ＮＡＡ０．１ｍｇ／Ｌ的ＭＳ培养基上获得无菌苗,幼苗的下胚轴在含６－ＢＡ０．１ｍｇ／Ｌ＋ＮＡＡ０．５ｍｇ／Ｌ的ＭＳ培养基上的出愈情况最佳,将来自下胚轴的愈伤组织培养了含有６－ＢＡ２．０ｍｇ／Ｌ＋ＮＡＡ０．２ｍｇ／Ｌ的ＭＳ培养基上分化出的丛生芽状态最好,最佳生根培养基为１／２ＭＳ＋ＩＢＡ０．５ｍｇ／Ｌ＋ＮＡＡ０．０５ｍｇ／Ｌ。     

风信子外植体植株再生系统的研究

风信子叶片及鳞片直接诱导下定芽的培养基为ＭＳ附加６－ＢＡ２．５ｍｇ／Ｌ、ＮＡＡ２．０ｍｇ／Ｌ、ＩＡＡ０．５ｍｇ／Ｌ和ＭＳ附加６－ＢＡ２．５ｍｇ／Ｌ、ＮＡＡ２．５ｍｇ／Ｌ。不定芽发育成小鳞茎的培养基为ＭＳ附加ＧＡ０．２ｍｇ／Ｌ、ＩＡＡ０．５ｍｇ／Ｌ。鳞茎移栽成活率为９０％,从而建立了风信子植株再生系统。     

雪兔子叶的组织培养及植株再生

以雪兔子无菌苗的幼叶为外植体,接种到ＭＳ补加ＮＡＡ（１．０－２．０）ｍｇ／Ｌ、６－ＢＡ（０．１－１．０）ｍｇ／Ｌ的培养基上诱导愈伤组织,其中以ＭＳ＋ＮＡＡ２．０ｍｇ／Ｌ＋６－ＢＡ０．５ｍｇ／Ｌ的诱导效果最好,经６周培养即可形成大量的黄绿色愈伤组织,诱导率可达１００％,经２－３次继代培养后,将生长发良好的愈伤组织转接到ＭＳ附加６－ＢＡ（０．５－２．０）ｍｇ／Ｌ、ＩＡＡ（０．０５－０．１）ｍｇ／Ｌ、Ｎ     

百合子房的组织培养

以百合子房为材料进行组培快繁，得到子房诱导成愈伤组织的最适培养基为ＭＳ＋ＢＡ１ｍｇ／Ｌ＋ＮＡＡ０．５ｍｇ／Ｌ：适合诱导分化的培养基为ＭＳ＋ＢＡ０．５ｍｇ／Ｌ＋ＩＡＡ０．５ｍｇ／Ｌ；适合生根的培养基为ＭＳ＋ＢＡ０．２ｍｇ／Ｌ＋ＩＡＡ１ｍｇ／Ｌ．     

百合基因转化受体系统的建立

以百合叶片为外植体不经愈伤组织直接诱导并且发育成带球径的大苗进行了研究,结果表明：叶片分芽培养基为ＭＳ＋ＢＡ０．５ｍｇ／Ｌ＋ＺＴ０．。１ｍｇ／Ｌ＋ＮＡＡ１．０ｍｇ／Ｌ生根培养基为１／２ＭＳ＋ＮＡＡ０．。２－１．０ｍｇ／Ｌ,成球并且生长培养基为ＭＳ＋ＩＡＡ１．０ｍｇ／Ｌ,移栽成活率为１００％《     

荞麦组织培养中的植株再生

用荞麦无菌苗的幼茎和幼叶作外植体分别接种在ＭＳ补加不同激素组合的培养基上培养获得再生植株。实验结果表明,适宜诱导愈伤组织的激素组合为２．４－Ｄ４．０ｍｇ／Ｌ＋ＫＴ０．２ｍｇ／Ｌ,适宜愈伤组织生长的激素组合为２．４－Ｄ１．０ｍｇ／Ｌ＋ＫＴ１．０ｍｇ／Ｌ。诱导芽的较适宜的组合为６－ＢＡ３．０ｍｇ／Ｌ＋ＩＡＡ０．１ｍｇ／Ｌ,不定芽接种到含ＭＳ＋ＩＢＡ２．０ｍｇ／Ｌ＋ＫＴ０．１ｍｇ／Ｌ的ＭＳ培养基上就能生     

巴西铁的茎组织培养

以巴西铁（Ｄｒａｃａｅｎａ　ｓａｎｄｅｒｉｅｎａ）茎段为接种材料，ＭＳ为基本培养基，吲哚乙酸（ＩＡＡ）、茶乙酸（ＮＡＡ），２，４－二氯苯氧乙酸（２．４－Ｄ）、６－苄氨基嘌呤（６－ＢＡ）、６一糠基氨基嘌呤（６－ＦＡ）、吲哚丁酸（ＩＢＡ）、生根粉（ＡＢＴ１）、玉米素（ＺＴ）为附加成分，进行诱导、分化、生根试验。诱导结果表明：ＩＡＡ不起作用，２，４－Ｄ有较好的促进作用，０．５ｍｇ／Ｌ（２，４－Ｄ）＋２ｍｇ／Ｌ（６－ＢＡ）组合，诱导率高达９０％。分化结果表明：ＮＡＡ、６－ＢＡ效果较好，６－ＦＡ作用不明显，ｌｍｇ／ＬＮＡＡ＋４ｍｓ／Ｌ（６－ＢＡ）＋２ｍｓ／ＬＺＴ组合，分化率最高．达８１．１％。生根结果表明：ＭＳ＋０．５ｍｇ／ＬＮＡＡ＋０．５ｍｇ／Ｌ（６－ＦＡ），ＭＳ＋０．４ｍｇ／ＬＮＡＡ＋２ｍｇ／ＬＩＢＡ，ＭＳ＋０．２ｍｇ／ＬＮＡＡ＋０．１ｍｇ／Ｌ（６－ＦＡ）＋ＡＢＴ１三种培养基均发根，生根率７０％以上，根粗，但有点脆，若培养基中加入活性碳产生的根则细而韧。     

库拉索芦荟组织培养研究

以库拉索芦荟为材料进行组织培养研究,分别以根、茎节、茎尖和叶为外植体接种于不同的诱导培养基中诱导芽的分化,待芽长至５ｃｍ左右地将其接入不同的生根培养基中生根,结果表明：茎节接种于ＭＳ（１９６２）＋６－ＢＡ４．０ｍｇ／Ｌ＋ＮＡＡ０．２ｍｇ／Ｌ诱导效率最高,而根没有产生不定芽;１／２ＭＡ＋ＩＡＡ０．２５ｍｇ／Ｌ＋ＮＡＡ０．２５ｍｇ／Ｌ＋活性炭０．３ｇ／Ｌ有利于试管苗的生根。     

球茎甘蓝花托花柄组织培养及其植株再生

球茎甘蓝花托、花柄在ＭＳ＋２,４－Ｄ０．５ｍｇ／Ｌ＋６－ＢＡ１ｍｇ／Ｌ培养基上培养,诱导形成愈伤组织．愈伤组织在ＭＳ＋ＮＡＡ０．５ｍｇ／Ｌ＋６－ＢＡ３ｍｇ／Ｌ的分化培养基上培养,能分化出芽．花托在附加６－ＢＡ和ＧＡ３的ＭＳ培养基上培养,能直接出芽．花柄在附加６－ＢＡ或６－ＢＡ和ＧＡ３的ＭＳ培养基上培养,能直接出芽．芽通过继代培养,能再生植株     

An Index mechanism for multi-scale view in spatial databases

There are numerous geometric objects stored in the spatial databases. An importance function in a spatial database is that users can browse the geometric objects as a map efficiently. Thus the spatial database should display the geometric objects users concern about swiftly onto the display window. This process includes two operations:retrieve data from database and then draw them onto screen. Accordingly, to improve the efficiency, we should try to reduce time of both retrieving object and displaying them. The former can be achieved with the aid of spatial index such as R-tree, the latter require to simplify the objects. Simplification means that objects are shown with sufficient but not with unnecessary detail which depend on the scale of browse. So the major problem is how to retrieve data at different detail level efficiently. This paper introduces the implementation of a multi-scale index in the spatial database SISP (Spatial Information Shared Platform) which is generalized from R-tree. The difference between the generalization and the R-tree lies on two facets: One is that every node and geometric object in the generalization is assigned with a importance value which denote the importance of them, and every vertex in the objects are assigned with a importance value,too. The importance value can be use to decide which data should be retrieve from disk in a query. The other difference is that geometric objects in the generalization are divided into one or more sub-blocks, and vertexes are total ordered by their importance value. With the help of the generalized R-tree, one can easily retrieve data at different detail levels.Some experiments are performed on real-life data to evaluate the performance of solutions that separately use normal spatial index and multi-scale spatial index. The results show that the solution using multi-scale index in SISP is satisfying.     

Characterization of Ordovician carbonate reservoirs, southeastern Saskatchewan, Canada

The discovery of the prolific Ordovician Red River reservoirs in 1995 in southeastern Saskatchewan was the catalyst for extensive exploration activity which resulted in the discovery of more than 15 new Red River pools. The best yields of Red River production to date have been from dolomite reservoirs. Understanding the processes of dolomitization is, therefore, crucial for the prediction of the connectivity, spatial distribution and heterogeneity of dolomite reservoirs.The Red River reservoirs in the Midale area consist of 3～4 thin dolomitized zones, with a total thickness of about 20 m, which occur at the top of the Yeoman Formation. Two types of replacement dolomite were recognized in the Red River reservoir: dolomitized burrow infills and dolomitized host matrix. The spatial distribution of dolomite suggests that burrowing organisms played an important role in facilitating the fluid flow in the backfilled sediments. This resulted in penecontemporaneous dolomitization of burrow infills by normal seawater. The dolomite in the host matrix is interpreted as having occurred at shallow burial by evaporitic seawater during precipitation of Lake Almar anhydrite that immediately overlies the Yeoman Formation. However, the low δ18O values of dolomited burrow infills (-5.9‰～ -7.8‰, PDB) and matrix dolomites (-6.6‰～ -8.1‰, avg. -7.4‰ PDB) compared to the estimated values for the late Ordovician marine dolomite could be attributed to modification and alteration of dolomite at higher temperatures during deeper burial, which could also be responsible for its 87Sr/86Sr ratios (0.7084～0.7088) that are higher than suggested for the late Ordovician seawaters (0.7078～0.7080). The trace amounts of saddle dolomite cement in the Red River carbonates are probably related to "cannibalization" of earlier replacement dolomite during the chemical compaction.     

A computer generator for randomly layered structures

AcomputergeneratorforrandomlylayeredstructuresYUJia shun1,2,HEZhen hua2(1.TheInstituteofGeologicalandNuclearSciences,NewZealand;2.StateKeyLaboratoryofOilandGasReservoirGeologyandExploitation,ChengduUniversityofTechnology,China)Abstract:Analgorithmisintrod…     

Perspherical Approaches for Electrons in Atoms and Charged Excitons in Quantum Wells

Instead of following Fock’s expansion,we solve the Schrodinger equation for some quantum mechanical manybody systems such as electrons in atoms and charged excitons in quantum wells in a similar way in hyperspherical coordinates by expanding the wave functions into orthonormal complete basis sets of the hyperspherical hannonics(HHs)of hyperangles and generalized Laguerre polynomials(GLPs)of the hyperradius.This leads the equation to     

Advances in broadband wireless communications under high-mobility scenarios

Future mobile communication systems aim at providing very high data transmission rates, even in high-mobility scenarios such as high-speed wheel-track trains, maglev trains, highway vehicles, airplanes, guided missiles or spacecraft. A particularly important commercial application is the strong and increasing worldwide demand for high- speed broadband wireless communications （up to 574.8 km/ h test speeds or 380 km/h commercial speeds） in railways, providing data, voice and video services for applications such as onboard entertainment services to passengers, train control, train dispatch, train sensor status handling and sur- veillance. In such high-mobility scenarios, there are a number of communication challenges, including fast hand- over, location updating, high-speed channel modeling, estimation and equalization, anti-Doppler spreading tech- niques, fast power control, and dedicated network architec- ture. Because signal transmission in very high-speed scenarios will inevitably experience serious deterioration, it is imperative to develop key broadband mobile communi- cation techniques for such high-speed vehicles.     

Wuhan University Journal of Natural Sciences TOTAL CONTENTS

<正>~~     

海南岛地体及其毗邻陆缘晚中生代—新生代古地磁研究和构造演化

本文叙述了对海南岛及其毗邻大陆边缘白垩纪到第四纪地层岩石进行古地磁研究的全部工作过程。通过分析岩石中剩余磁矢量的磁偏角及磁倾角的变化,提出海南岛白垩纪以来经历的构造演化模式如下:早期伴随顺时针旋转而向南迁移,后期伴随逆时针转动并向北运移。联系该地区及邻区的地质、地球物理资料,对海南岛上述的构造地体运动提出以下认识:北部湾内早期有一拉张作用,主要是该作用使湾内地壳显著伸长减薄,形成北部湾盆地。从而导致了海南岛的早期构造运动,而海南岛后期的构造运动则主要是受南海海底扩张的影响。海南地体运动规律的阐明对于了解北部湾油气盆地的形成演化有重要的理论和实际意义。     

Scale-based spatial data model for GIS

Being the primary media of geographical information and the elementary objects manipulated, almost all of maps adopt the layer-based model to represent geographic information in the existent GIS. However, it is difficult to extend the map represented in layer-based model. Furthermore, in Web-Based GIS, It is slow to transmit the spatial data for map viewing. In this paper, for solving the questions above, we have proposed a new method for representing the spatial data. That is scale-based model. In this model we represent maps in three levels: scale-view, block, and spatial object, and organize the maps in a set of map layers, named Scale-View, which associates some given scales.Lastly, a prototype Web-Based GIS using the proposed spatial data representation is described briefly.     

Exciton Seebeck in Molecular Systems

Various applications relevant to the exciton dynamics,such as the organic solar cell,the large-area organic light-emitting diodes and the thermoelectricity,are operating under temperature gradient.The potential abnormal behavior of the exicton dynamics driven by the temperature difference may affect the efficiency and performance of the corresponding devices.In the above situations,the exciton dynamics under temperature difference is mixed with     

Achieving Unusual States of Matter Under High Pressure

The elongation method,originally proposed by Imamura was further developed for many years in our group.As a method towards O(N)with high efficiency and high accuracy for any dimensional systems.This treatment designed for one-dimensional(ID)polymers is now available for three-dimensional(3D)systems,but geometry optimization is now possible only for 1D-systems.As an approach toward post-Hartree-Fock,it was also extended to