Equilibrium geometric structure and electronic properties of Cl and H_2O co-adsorption on Fe(100) surface

Based on the first principles density functional theory,the equilibrium geometric structure and surface electronic properties of Cl and H2O co-adsorption on the Fe(100) surface are investigated.The results indicate that the optimal adsorption site for Cl and H2O co-adsorption on the Fe(100) surface is the location of Cl at the bridge site and H2O at the top site.Compared with the Fe(100)/H2O adsorption system,remarkable changes in geometric structure and electronic properties occur,owing to the presence of ...     

An EQCM study of the electrochemical behaviors of polycrystalline gold electrode in sulfuric acid solution

The electrochemical quartz crystal microbalance (EQCM) was applied to study the electrochemical behaviors of polycrystalline Au in sulfuric acid solution. The large mass change observed in the doublelayer region was attributed to the partly discharged adsorption of sulfate anions with the co-adsorption of H₂O. According to the observed EQCM frequency response, the formation mechanism of surface oxide was reasonably postulated, in which the roles of the adsorbed anions and the co-adsorbed H₂O were particularly emphasized. Supported by the National Natural Science Foundation of China Chen Shengli: born in 1968, Ph. D.     

An EQCM study of the electrochemical behaviors of polycrystalline gold electrode in sulfuric acid solution

The electrochemical quartz crystal microbalance (EQCM) was applied to study the electrochemical behaviors of polycrystalline Au in sulfuric acid solution. The large mass change observed in the doublelayer region was attributed to the partly discharged adsorption of sulfate anions with the co-adsorption of H₂O. According to the observed EQCM frequency response, the formation mechanism of surface oxide was reasonably postulated, in which the roles of the adsorbed anions and the co-adsorbed H₂O were particularly emphasized. Supported by the National Natural Science Foundation of China Chen Shengli: born in 1968, Ph. D.     

溶氧水在Fe（001）表面吸附的第一性原理研究

为了研究溶解氧含量对Fe基换热表面腐蚀行为的影响机理,根据第一性原理,对O2单分子、H2O单分子和溶氧水体系在Fe基换热表面的吸附进行了研究,采用GGA/PBE,近似计算吸附过程中的吸附能量、态密度及布居数变化。计算结果表明:含氧水溶液中溶液与Fe基表面存在表面吸附,水分子趋向于顶位吸附,氧分子趋向于Griffiths吸附;H2O分子在Fe(001)表面吸附而相互作用时,引起了界面双电层电荷分布的变化,使Fe原子失去电子带正电,导致表面电位发生变化;O2分子在Fe(001)晶面吸附时,促使Fe(001)表面原子失去电子,表面电位增加,O2分子与表面Fe原子易于发生电子转移,其中O原子的2p轨道对于O2分子在Fe(001)晶面的吸附起主要作用;随着溶氧水体系中O2分子所占比例的增大,吸附能的绝对值也随之增加,Fe基换热表面相互作用更强。研究探明了不同溶氧量对Fe基换热表面腐蚀的影响规律,为实验研究金属基体腐蚀机理提供了理论参考。     

Theoretical study of adsorption and dissociation of NH3 on the Ir{110}（1×2） surface

The adsorption and dissociation of NH3 on Ir{110}（1×2） have been investigated using the density- functional calculations at a coverage of 0.25 ML. The adsorption sites, energy, and geometries were obtained for NH3, NH2, and H adsorptions on the surface. The transition state for NH3 dissociation on Ir{110}（1×2） was also identified. It was found that NH3 is adsorbed preferentially at the ridge atop site, while NH2 and H are adsorbed at the ridge bridge site. The activation barrier of NH3 dissociation is 78.4 kJ/mol, which is very close to the NH3 adsorption energy of 90.0 kJ/mol. This indicates that the desorption and dissociation of NH3 on Ir{110}（1×2） are very competitive, which is consistent with the recent experimental results.     

同步辐射XANES方法对FeCl3 水溶液的研究

利用X 射线近边吸收谱学(X-ray Absorption Near Edge Structure, XANES)方法研究了不同浓度的FeCl₃ 水溶液中Fe³⁺离子的电子结构和近邻结构. 在不同浓度的FeCl₃ 水溶液的XANES 谱中, XANES 谱的形状随着FeCl₃ 浓度的不同而发生改变. 在XANES 谱的边前结构中观测到边前锋的分裂, 其分裂的能量差约为1.6 eV, 随着浓度的降低约有0.2 eV 的高能方向的位移, 此边前结构由1s-3d 轨道的电子跃迁引起, 双峰分裂来源于配位体配位引起的3d 轨道分裂. 随着FeCl₃ 浓度的改变, XANES 谱的主峰也发生变化, 此变化来源于溶液中Fe—Cl 配位与Fe—O 配位的比例变化. 另外, 利用量子化学计算的方法对于Fe³⁺与不同数目的H₂O 和Cl^?配位体络合时的构型进行了计算, 得到了Fe³⁺在水溶液中近邻结构的信息, 从另一方面解释了FeCl₃ 溶液中Fe³⁺离子3d 轨道分裂能的变化     

F修饰对SiO2@TiO2亲疏水性及光催化性能的影响

采用两步法制备了氟修饰疏水性F-SiO_2@TiO_2材料.以三乙氧基氟硅烷(TEFS)为硅源,采用后嫁接的方法在短孔道MCM-41小球表面引入F原子,再利用醇热法在F-MCM-41小球表面生长TiO_2纳米晶颗粒.利用透射电子显微镜(TEM)、X射线粉末散射(XRD)、X射线光电子能谱(XPS)、N_2气吸脱附等手段表征了材料的物相组成和表面结构.研究表明:所制备的氟修饰F-SiO_2@TiO_2纳米复合材料为核壳结构,具有较大的比表面积、较好的介孔结构及较佳的热稳定性.同时,TiO_2纳米颗粒在F-MCM-41小球表面分散均匀、结晶度高、颗粒尺寸小且均一、与F-SiO_2结合牢固.重量吸附实验和光催化实验进一步证实F修饰可抑制水的吸附有利于提高F-SiO_2@TiO_2材料的疏水性和对气相有机污染物的光催化性能.     

GeLi62+团簇的结构及储氢性能研究

利用密度泛函B3LYP理论在6-311+G(d,p)基组水平上研究四价锗负离子经过6个一价锂正离子修饰后的结构和电子特征,并计算了H2分子在其表面的吸附行为,进而研究其储氢性能。结果表明,由6个Li离子修饰锗离子形成GeLi_6~(2+)团簇结构具有较高的动力学稳定性。GeLi_6~(2+)团簇表面最多能够有效吸附18个氢分子,其质量密度为24.10wt%。H2分子与GeLi_6~(2+)团簇的相互作用能量范围为2.14～4.004k Cal.mol-1。储氢性能研究表明GeLi_6~(2+)团簇在储氢领域有望具有良好的应用前景。     

Solvothermal synthesis of CdS nanorods and photovoltaic characteristics of CdS/PVK composite system

Large quantities of CdS nanorods are successfully synthesized through Cd（CH3COO）2·2H2o reacting with Na2S·9H2O and EDA in aqueous solution. XRD result shows that the sample is of hexagonal structure. And TEM result shows that the morphologies of the resulting CdS are mainly in three-armed rod-like structure with a diameter of 10--15 nm and a length of 100 nm. The nanocomposites of CdS/PVK with different molar ratios are prepared by spin coating method on tin-doped indium oxide （ITO） substrate. A notable decrease of photoluminescence （PL） efficiency and a significant enhancement of surface photovoltage signal have been observed in CdS/PVK composites when the molar fraction of CdS increases. We interpret these results as the energy level matching between CdS and PVK in nanocomposites. This energy level matching facilitates fast interfacial charge transfer then increases the separation efficiency of electron-hole pairs and the carrier generation efficiency. The detailed charge transfer process has also been demonstrated.     

Pu(H2O)53+和Pu(H2O)54+ 团簇的相对论密度泛函研究

用TPSSTPSS密度泛函方法, Pu离子和H₂O分子分别采用相对论有效原子实势(RECP)和6-31g基组, 研究了Pu(H₂O)₅³⁺和Pu(H₂O)₅⁴⁺ 团簇溶剂化和非溶剂化效应中的几何结构及紫外可见吸收光谱. 计算结果表明: 水溶剂环境对Pu(H₂O)₅³⁺及Pu(H₂O)₅⁴⁺ 团簇的几何结构影响都比较明显. NBO电荷分析表明水分子与钚离子之间没有直接的电荷转移. 所研究团簇的未配对电子都占据5f轨道. 在气相及水溶剂环境下, 所研究团簇的紫外可见吸收光谱存在较大差距. 主要的吸收峰大都源于f电子之间的跃迁.     

Preparation and performance of LiNi0. 8Co0.2O2 cathode material based on Co-substituted α-Ni（OH）2 precursor

Co-substituted α-Ni（OH）2 was synthesized by a novel microwave homogeneous precipitation method in the presence of urea. LiNi0.8Co0.2O2 cathode material was synthesized by calcining Co-substituted α-Ni（OH）2 precursor and LiOH·H2O at 900℃for 10 h in flowing oxygen. XRD, FTIR, FESEM and electrochemical tests were used to study the physical and the electrochemical performances of the materials. The results show that the prepared LiNi0.8Co0.2O2 compound has a good layered hexagonal structure. Moreover, the LiNi0.8Co0.2O2cathode material demonstrates stable cyclability with a high initial specific discharge capacity of 183.9 mAh/g. The good electrochemical performance could be attributed to the uniform distribution of Ni^2＋ and Co^2＋ ions in the crystal structure and a minimal cation mixing in LiNi0.8Co0.2O2 host structure.     

Li3O+超碱团簇的结构及储氢性能的理论研究

采用杂化密度泛函理论(DFT)的B3LYP方法,在6-311++G (d, p)基组水平上对Li₃O ^{0, +}超碱团簇的几何结构和稳定性进行理论计算,并研究了Li₃O⁺团簇的储氢性能。结果表明,Li₃O⁺团簇结构相比中性Li₃O团簇结构的动力学稳定性要高。氢分子在Li₃O⁺团簇表面能以介于物理吸附与化学吸附之间的形式吸附,每个Li原子最多可以有效吸附三个H₂,储氢质量分数可达33.01 wt%。H₂分子在Li₃O⁺团簇表面的平均吸附能范围为1.959~3.591 kCal/mol,该吸附能满足在近室温条件下可逆吸放氢反应的热力学要求。     

不同形貌LaBO_3型钙钛矿的制备及其催化H_2O_2分解反应性能

采用柠檬酸络合法制备了La BO3(B=Fe,Co,Ni)钙钛矿催化剂,通过X-射线粉末衍射(XRD)、傅立叶-红外光谱(FT-IR)、透射电镜(TEM)、X-射线光电子能谱(XPS)等对催化剂进行了表征,在室温下测定了其对H2O2的催化分解能力.结果表明:催化分解能力依次为La Ni O3>La Co O3>La Fe O3,说明Ni较Co和Fe能更好地分解H2O2.通过改变La Fe O3催化剂的形貌也能提高催化剂性能,如多孔状La Fe O3较负载在SBA-15上的La Fe O3具有更好的催化分解活性.     

An in-situ DRIFTS study in the reaction between NO x and soot on BaAl2O4

The interactions between NO, O2 and their mixture on BaAl2O4, as well as the reaction of NOx with soot in the presence of O2, have been investigated using Diffuse Reflectance Infrared Fourier Transform Spectroscopy （DRIFTS）. NO adsorption produces only nitrites species in the absence of O2. NO2 adsorption produces nitrates species besides nitrites species. The produced nitrites will further react with O2, Osurf^-. and Olattice^2- to form nitrates. The reaction of NOx with soot begins with the reaction of nitrates with soot oxygenated complex （C（O））, which is regarded as the key and rate determining step. A reaction pathway is proposed for the catalyzed reaction of NOx with soot in the presence of O2.     

HCl气体在烧结矿表面的吸附机理及特性

基于密度泛函理论,对HCl气体在烧结矿表面的吸附机理进行模拟计算,并且通过实验研究了不同反应温度、烧结矿粒度和HCl气体流量条件下烧结矿表面吸附HCl气体的特性规律.结果表明：HCl在α-Fe2 O3(001)表面的最大吸附能为-175.91 kJ·mol-1,为化学吸附. Cl原子与基底表面的Fe原子发生反应结合成Cl-Fe键.吸附后Fe-O键长变短,Fe-O键能增加,结构更紧密. Cl原子与Fe原子结合成键后,削弱Cl原子与H原子的结合.温度对烧结矿吸附氯元素量的影响较大,随着温度升高,氯元素吸附量逐渐增多;随着烧结矿粒度增大,氯元素吸附量逐渐减少;随着HCl气体流量的增加,氯元素吸附量迅速增加.     

Preparation and magnetic properties of CoFe2O4/TiO2 composite films

Using （Ti（OC4H9）4） and metal chlorates as starting materials, CoFe2O4/TiO2 composite films were prepared by sol-gel method. The effects of heat treatment temperature and pH of the precursor on microstructure and magnetic properties were studied. The phase structure of the samples was examined by X-ray diffraction. The microstructure was examined by scanning electron microscope, atomic force microscope and polarized microscope. The magnetic property was measured by vibrating sample magnetometer. The results show that the crystals of different phases grow up independently. CoFe2O4 is uniformly embedded into the TiO2 matrix in the prepared composite films, and the growth of composite films is dependent on the heat treatment temperatures and PH of the precursor. The average size of CoFe2O4 crystal is 19 nm in Nanocomposite film prepared when the heat treatment temperature is 800℃ and the pH of the precursor is between 2 and 3. The magnetism of the composite films is enhanced as the heat treatment temperature increases.     

Styrene polymerization catalyzed by nickel complexes bearing hydroxyindanone-iminate ligands

Activated by methylaluminoxane, mononuclear bis（hydroxyindanone-iminate）nickel complexes Ni[ArN=CC2H3（CH3）C6H2（R）O]2 （Ar = 2,6-i-Pr2C6H3, R=Me（1）, R=CI（2）, and R=H（3）） showed good activity for the styrene polymerization. The effect of many reaction parameters including the AI/Ni ratio, temperature, and reaction time on catalytic activities of catalytic systems and the molecular weights of the obrained polystyrene was ascertained. The highest activity of 1.34×10^5g（PS）·mol^-1（Ni）·h^-1 was obtained under the optimum reaction condition. The ^13C NMR spectra of the polymers revealed that the polymer was isotactic-rich atactic polystyrene. And the coordination mechanism was confirmed by the analyses of the polymer chain end-groups.     

Lithium bond structures of HnY （n=2, 3; Y=O,S, N）…LiNH2 and the abnormal blue shift of N-Li bond

The optimized geometries of the complexes between HnY （n=2, 3; Y=O, S, N） and LiNH2 have been calculated at the B3LYP/6-311＋＋G^＊＊ and MP2/6-311＋＋G^＊＊ levels. Three stable complexes were obtained. Frequency analysis showed that the enlarged 2N-4Li presents the abnormal blue shift in three complexes. The calculated binding energy with basis set super-position error （BSSE） and zero-point vibrational energy （ZPE） corrections of complex Ⅰ-Ⅲ is -58.65, -31.66 and -69.59 kJ·mol^-1 （MP2）, respectively. Natural bond orbital theory （NBO） analysis has been performed, and the results revealed that the H2O…LiNH2 （complex I） and H3N…LiNH2 （complex Ⅲ） are formed with coexisting σ-s and n-s type lithium bond interactions, complex Ⅱ is formed with ττ-s type lithium bond interaction between HnY （n=2,3; Y=O, N） and LiNH2, and H2S…LiNH2 （complex Ⅱ） is formed with n-s type lithium bond interaction between H2S and LiNH2. Natural resonance theory （NRT） and atom in molecule （AIM） theory have also been studied to investigate the bond order and topological properties of the lithium bond structures.     

A novel Pd/silicalite-1 composite membrane for hydrogen separation

A novel Pd/silicalite-1 composite membrane supported on the macroporous tubular stainless steel substrate was successfully fabricated by electroless plating at 303 K. The structure, morphology and gaseous permeability of the membrane were detected by X-ray diffractiometry （XRD）, scanning electron microscopy （SEM） and single-gas permeation test, respectively. Results confirm the formation of a thin, smooth, and continuous Pd/silicalite-1 composite membrane. The obtained composite membrane shows a high H2 permeance of 1.15×10^-6 mol. m^-2. s^-1. Pa^-1 with moderate H2 selectivity of 250 for H2/N2 at 773 K, at 0.1 MPa pressure drop, suggesting the potential application for H2 separation.     

Theoretical study of partial oxidation of ethylene by vanadium trioxide cluster cation

Density functional theory （DFT） study of reaction between vanadium trioxide cluster cation （VO3^＋） and ethylene （C2H4） to yield VO2^＋ ＋ CH3CHO （acetaldehyde） and VO2CH2^＋ ＋ HCHO （formaldehyde） is carried out. Structures of all reactants, products, intermediates, and transition state in the reaction have been optimized and characterized. The results show unexpected barriers in the reaction due to the existence of a η^2-O2 moiety in the ground state structure of VO3^＋. The initial reaction steps combining ethylene adsorption, C=C activation and O-O cleavage are proposed as rate limiting processes. Comparison of reactions of VO3^＋ ＋ C2H4 with VO3 ＋ C2H4 and VO2^＋ ＋ C2H4 in the previous studies is made in detail. The results of this work may shed light on the understanding of C=C bond cleavage in related heterogeneous catalysis.