Modified unscented Kalman filter using modified filter gain and variance scale factor for highly maneuvering target tracking

To improve the low tracking precision caused by lagged filter gain or imprecise state noise when the target highly maneuvers, a modified unscented Kalman filter algorithm based on the improved filter gain and adaptive scale factor of state noise is presented. In every filter process, the estimated scale factor is used to update the state noise covariance Qk, and the improved filter gain is obtained in the filter process of unscented Kalman filter （UKF） via predicted variance Pk｜k-1, which is similar to the standard Kalman filter. Simulation results show that the proposed algorithm provides better accuracy and ability to adapt to the highly maneuvering target compared with the standard UKF.     

IUKF neural network modeling for FOG temperature drift

A novel neural network based on iterated unscented Kalman filter （IUKF） algorithm is established to model and com- pensate for the fiber optic gyro （FOG） bias drift caused by temperature. In the network, FOG temperature and its gradient are set as input and the FOG bias drift is set as the expected output. A 2-5-1 network trained with IUKF algorithm is established. The IUKF algorithm is developed on the basis of the unscented Kalman filter （UKF）. The weight and bias vectors of the hidden layer are set as the state of the UKF and its process and measurement equations are deduced according to the network architecture. To solve the unavoidable estimation deviation of the mean and covariance of the states in the UKF algorithm, iterative computation is introduced into the UKF after the measurement update. While the measure- ment noise R is extended into the state vectors before iteration in order to meet the statistic orthogonality of estimate and mea- surement noise. The IUKF algorithm can provide the optimized estimation for the neural network because of its state expansion and iteration. Temperature rise （-20-20℃） and drop （70-20℃） tests for FOG are carried out in an attemperator. The temperature drift model is built with neural network, and it is trained respectively with BP, UKF and IUKF algorithms. The results prove that the proposed model has higher precision compared with the back- propagation （BP） and UKF network models.     

New rapid transfer alignment method for SINS of airborne weapon systems

Transfer alignment is an effective alignment method for the strapdown inertial navigation system （SINS） of airborne weapon systems. The traditional transfer alignment methods for large misalignment angles alignment use nonlinear transfer align- ment models and incorporate nonlinear filtering. A rapid transfer alignment method with linear models and linear filtering for ar- bitrary misalignment angles is presented. Through the attitude quaternion decomposition, the purpose of transfer alignment is converted to estimate a constant quaternion. Employing special manipulations on measurement equation, velocity and attitude linear measurement equations are derived. Then the linear trans- fer alignment model for arbitrary misalignment angles is built. An adaptive Kalman filter is developed to handle modeling errors of the measurement noise statistics. Simulation results show feasibili- ty and effectiveness of the proposed method, which provides an alternative rapid transfer alignment method for airborne weapons.     

Adaptive unscented Kalman filter for parameter and state estimation of nonlinear high-speed objects

An adaptive unscented Kalman filter (AUKF) and an augmented state method are employed to estimate the timevarying parameters and states of a kind of nonlinear high-speed objects. A strong tracking filter is employed to improve the tracking ability and robustness of unscented Kalman filter (UKF) when the process noise is inaccuracy, and wavelet transform is used to improve the estimate accuracy by the variance of measurement noise. An augmented square-root framework is utilized to improve the numerical stability and accuracy of UKF. Monte Carlo simulations and applications in the rapid trajectory estimation of hypersonic artillery shells confirm the effectiveness of the proposed method.     

Self-alignment of full skewed RSINS：observability analysis and full-observable Kalman filter

Traditional orthogonal strapdown inertial navigation sys-tem （SINS） cannot achieve satisfactory self-alignment accuracy in the stationary base： taking more than 5 minutes and al the iner-tial sensors biases cannot get ful observability except the up-axis accelerometer. However, the ful skewed redundant SINS （RSINS） can not only enhance the reliability of the system, but also improve the accuracy of the system, such as the initial alignment. Firstly, the observability of the system state includes attitude errors and al the inertial sensors biases are analyzed with the global perspective method： any three gyroscopes and three accelerometers can be assembled into an independent subordinate SINS （sub-SINS）;the system state can be uniquely confirmed by the coupling connec-tions of al the sub-SINSs;the attitude errors and random constant biases of al the inertial sensors are observable. However, the ran-dom noises of the inertial sensors are not taken into account in the above analyzing process. Secondly, the ful-observable Kalman filter which can be applied to the actual RSINS containing random noises is established; the system state includes the position, ve-locity, attitude errors of al the sub-SINSs and the random constant biases of the redundant inertial sensors. At last, the initial self-alignment process of a typical four-redundancy ful skewed RSINS is simulated： the horizontal attitudes （pitch, rol ） errors and yaw error can be exactly evaluated within 80 s and 100 s respectively, while the random constant biases of gyroscopes and accelero-meters can be precisely evaluated within 120 s. For the ful skewed RSINS, the self-alignment accuracy is greatly improved, mean-while the self-alignment time is widely shortened.     

Radial acceleration estimation of multiple high maneuvering targets

The acceleration of a high maneuvering target in signal processing is helpful to enhance the performance of the tracker and facilitate the classification of targets. At present, most of the research on acceleration estimation is carried out in cases of a single target with time-frequency analysis methods such as fractional Fourier transform （FRFT）, Hough-ambiguity transform （HAT）, and Wigner-Vil e distribution （WVD）, which need to satisfy enough time duration and sampling theorem. Only one reference proposed a method of acceleration estimation for multiple targets based on modified polynomial phase transform （MPPT） in the lin-ear frequency modulation （LFM） continuous-wave （CW） radar. The method of acceleration estimation for multiple targets in the pulse Doppler （PD） radar has not been reported so far. Compressive sensing （CS） has the advantage of sampling at a low rate and short duration without sacrificing estimation performance. There-fore, this paper proposes a new method of acceleration estimation for multiple maneuvering targets with the unknown number based on CS with pulse Doppler signals. Simulation results validate the effectiveness of the proposed method under several conditions with different duration, measurement numbers, signal to noise ra-tios （SNR）, and regularization parameters, respectively. Simulation results also show that the performance of the proposed method is superior to that of FRFT and HAT in the condition of multiple targets.     

Inference for constant-stress accelerated life test with Type-I progressively hybrid censored data from Burr-Xll distribution

This paper proposes a simple constant-stress accel- erated life test （ALT） model from Burr type XII distribution when the data are Type-I progressively hybrid censored. The maximum likelihood estimation （MLE） of the parameters is obtained through the numerical method for solving the likelihood equations. Approxi- mate confidence interval （CI）, based on normal approximation to the asymptotic distribution of MLE and percentile bootstrap Cl is derived. Finally, a numerical example is introduced and then a Monte Carlo simulation study is carried out to illustrate the pro- posed method.     

Method of target tracking with Doppler blind zone constraint

Doppler blind zone （DBZ） has a bad influence on the airborne early warning radar, although it has good detection performance for low altitude targets with pulse Doppler （PD） technology. In target tracking, the blind zone can cause target tracking breakage easily. In order to solve this problem, a parallel particle filter （PF） algorithm based on multi-hypothesis motion models （MHMMs） is proposed. The algorithm produces multiple possible target motion models according to the DBZ constraint. Particles are updated with the constraint in each motion model. Once the first measurement from the target which reappears from DBZ falls into the particle cloud formed by any model, the measurementtrack association succeeds and track breakage is avoided. The simulation results show that on the condition of different DBZ ranges, a high association ratio can be got for targets with different maneuverability levels, which accordingly improves the tracking quality.     

Underdetermined DOA estimation and blind separation of non-disjoint sources in time-frequency domain based on sparse representation method

This paper deals with the blind separation of nonstation-ary sources and direction-of-arrival （DOA） estimation in the under-determined case, when there are more sources than sensors. We assume the sources to be time-frequency （TF） disjoint to a certain extent. In particular, the number of sources presented at any TF neighborhood is strictly less than that of sensors. We can identify the real number of active sources and achieve separation in any TF neighborhood by the sparse representation method. Compared with the subspace-based algorithm under the same sparseness assumption, which suffers from the extra noise effect since it can-not estimate the true number of active sources, the proposed algorithm can estimate the number of active sources and their cor-responding TF values in any TF neighborhood simultaneously. An-other contribution of this paper is a new estimation procedure for the DOA of sources in the underdetermined case, which combines the TF sparseness of sources and the clustering technique. Sim-ulation results demonstrate the validity and high performance of the proposed algorithm in both blind source separation （BSS） and DOA estimation.     

Reduced K-best sphere decoding algorithm based on minimum route distance and noise variance

This paper focuses on reducing the complexity of K-best sphere decoding （SD） algorithm for the detection of uncoded multi-ple input multiple output （MIMO） systems. The proposed algorithm utilizes the threshold-pruning method to cut nodes with partial Euclidean distances （PEDs） larger than the threshold. Both the known noise value and the unknown noise value are considered to generate the threshold, which is the sum of the two values. The known noise value is the smal est PED of signals in the detected layers. The unknown noise value is generated by the noise power, the quality of service （QoS） and the signal-to-noise ratio （SNR） bound. Simulation results show that by considering both two noise values, the proposed algorithm makes an efficient reduction while the performance drops little.     

Cramer-Rao bound of joint estimation of target location and velocity for coherent MIMO radar

The optimal estimation performance of target parameters is studied. First, the general form of Cramer-Rao bound （CRB） for joint estimation of target location and velocity is derived for coherent multiple input multiple output （MIMO） radars. To gain some insight into the behavior of the CRB, the CRB with a set of given orthogonal waveforms is studied as a specific case. Second, a maximum likelihood （ML） estimation algorithm is proposed. The mean square error （MSE） of the ML estimation of target location and velocity is obtained by Monte Carlo simulation and it approaches CRB in the high signal-to-noise ratio （SNR） region.     

Solution for polarimetric radar cross section measurement and calibration

The exact radar cross-section （RCS） measurement is difficult when the scattering of targets is low. Ful polarimetric cali-bration is one technique that offers the potential for improving the accuracy of RCS measurements. There are numerous polarimetric calibration algorithms. Some complex expressions in these algo-rithms cannot be easily used in an engineering practice. A radar polarimetric coefficients matrix （RPCM） with a simpler expression is presented for the monostatic radar polarization scattering matrix （PSM） measurement. Using a rhombic dihedral corner reflector and a metal ic sphere, the RPCM can be obtained by solving a set of equations, which can be used to find the true PSM for any target. An example for the PSM of a metal ic dish shows that the proposed method obviously improves the accuracy of cross-polarized RCS measurements.     

Response surface method using grey relational analysis for decision making in weapon system selection

A proper weapon system is very important for a na- tional defense system. Generally, it means selecting the optimal weapon system among many alternatives, which is a multiple- attribute decision making （MADM） problem. This paper proposes a new mathematical model based on the response surface method （RSM） and the grey relational analysis （GRA）. RSM is used to obtain the experimental points and analyze the factors that have a significant impact on the selection results. GRA is used to an- alyze the trend relationship between alternatives and reference series. And then an RSM model is obtained, which can be used to calculate all alternatives and obtain ranking results. A real world application is introduced to illustrate the utilization of the model for the weapon selection problem. The results show that this model can be used to help decision-makers to make a quick comparison of alternatives and select a proper weapon system from multiple alternatives, which is an effective and adaptable method for solving the weapon system selection problem.     

Near optimal condition of OMP algorithm in recovering sparse signal from noisy measurement

This paper analyzes the performance of the orthogonal matching pursuit （OMP） algorithm in recovering sparse signals from noisy measurement. Considering the fact that some matrices satisfy some restricted isometry properties （RIPs） but not the coherence condition, a superior RIP-based condition is proposed, which means that if the measurement matrix satisfies δk＋1 〈 1/（2 ＋ √k） and the minimum component signal-to-noise ratio （MCSNR） is bounded, the OMP algorithm can exactly identify the support of the original sparse signal within k iterations. Finally, the theoretical results are verified by numerical simulations con- cerning different values of MCSNR and noise levels.     

Novel approach for identifying Z-axis drift of RLG based on GA-SVR model

This paper describes a novel approach for identifying the Z-axis drift of the ring laser gyroscope （RLG） based on ge-netic algorithm （GA） and support vector regression （SVR） in the single-axis rotation inertial navigation system （SRINS）. GA is used for selecting the optimal parameters of SVR. The latitude error and the temperature variation during the identification stage are adopted as inputs of GA-SVR. The navigation results show that the proposed GA-SVR model can reach an identification accuracy of 0.000 2 （？）/h for the Z-axis drift of RLG. Compared with the ra-dial basis function-neural network （RBF-NN） model, the GA-SVR model is more effective in identification of the Z-axis drift of RLG.     

Cramer-Rao bound and signal-to-noise ratio gain in distributed coherent aperture radar

This paper studies the estimation performance of the coherent processing parameter （CPP）, including time delay differences and phase synchronization errors among different apertures of the distributed coherent aperture radar （DCAR）. Firstly, three architectures of signal processing in the DCAR are introduced. Secondly, the closed-form Cramer-Rao bound （CRB） of the CPP estimation is derived and compared. Then, the closed-form CRB is verified by numerical simulations. Finally, when the next generation radar works in a fully coherent mode, the closed-form signal-to-noise ratio （SNR） gain of the three architectures is presented.     

Codebook design for uplink of densely small cells

The shrinking of cell-size brings significant changes to the wireless uplink of densely small cells （DSCs）. A codebook design is proposed that utilizes the strong line of sight （LOS） chan- nel component existing in a DSC system for uplink of the DSC system. To further improve the uplink performance, the high-rank codebook is designed based on singular value decomposition （SVD） due to the unnecessary preservation of strict constant modulus in the DSC system. And according to the simulation result, the proposed codebook leads to significant sum-rate gain and appreciable block error rate （BLER） performance improvement in the DSC system.     

Simulated annealing spectral clustering algorithm for image segmentation

The similarity measure is crucial to the performance of spectral clustering. The Gaussian kernel function based on the Euclidean distance is usual y adopted as the similarity measure. However, the Euclidean distance measure cannot ful y reveal the complex distribution data, and the result of spectral clustering is very sensitive to the scaling parameter. To solve these problems, a new manifold distance measure and a novel simulated anneal-ing spectral clustering （SASC） algorithm based on the manifold distance measure are proposed. The simulated annealing based on genetic algorithm （SAGA）, characterized by its rapid convergence to the global optimum, is used to cluster the sample points in the spectral mapping space. The proposed algorithm can not only reflect local and global consistency better, but also reduce the sensitivity of spectral clustering to the kernel parameter, which improves the algorithm’s clustering performance. To efficiently apply the algorithm to image segmentation, the Nystrom method is used to reduce the computation complexity. Experimental results show that compared with traditional clustering algorithms and those popular spectral clustering algorithms, the proposed algorithm can achieve better clustering performances on several synthetic datasets, texture images and real images.     

Multi-polarization reconstruction from compact polarimetry based on modified four-component scattering decomposition

An improved algorithm for multi-polarization reconstruction from compact polarimetry （CP） is proposed. According to two fundamental assumptions in compact polarimetric reconstruction, two improvements are proposed. Firstly, the four-component model-based decomposition algorithm is modified with a new volume scattering model. The decomposed helix scattering component is then used to deal with the non-reflection symmetry condition in compact polarimetric measurements. Using the decomposed power and considering the scattering mechanism of each component, an average relationship between copolarized and crosspolarized channels is developed over the original polarization state extrapolation model. E-SAR polarimetric data acquired over the Oberpfaffenhofen area and JPL/AIRSAR polarimetric data acquired over San Francisco are used for verification, and good reconstruction results are obtained, demonstrating the effectiveness of the proposed algorithm.     

Efficient matrix inversion based on VLIW architecture

Matrix inversion is a critical part in communication, signal processing and electromagnetic system. A flexible and scalable very long instruction word （VLIW） processor with clustered architecture is proposed for matrix inversion. A global register file （RF） is used to connect al the clusters. Two nearby clusters share a local register file. The instruction sets are also designed for the VLIW processor. Experimental results show that the proposed VLIW architecture takes only 45 latency to invert a 4 × 4 matrix when running at 150 MHz. The proposed design is roughly five times faster than the DSP solution in processing speed.