Observation of the spin Seebeck effect

The generation of electric voltage by placing a conductor in a temperature gradient is called the Seebeck effect. Its efficiency is represented by the Seebeck coefficient, S, which is defined as the ratio of the generated electric voltage to the temperature difference, and is determined by the scattering rate and the density of the conduction electrons. The effect can be exploited, for example, in thermal electric-power generators and for temperature sensing, by connecting two conductors with different Seebeck coefficients, a device called a thermocouple. Here we report the observation of the thermal generation of driving power, or voltage, for electron spin: the spin Seebeck effect. Using a recently developed spin-detection technique that involves the spin Hall effect, we measure the spin voltage generated from a temperature gradient in a metallic magnet. This thermally induced spin voltage persists even at distances far from the sample ends, and spins can be extracted from every position on the magnet simply by attaching a metal. The spin Seebeck effect observed here is directly applicable to the production of spin-voltage generators, which are crucial for driving spintronic devices. The spin Seebeck effect allows us to pass a pure spin current, a flow of electron spins without electric currents, over a long distance. These innovative capabilities will invigorate spintronics research.     

Giant spin Seebeck effect in a non-magnetic material

The spin Seebeck effect is observed when a thermal gradient applied to a spin-polarized material leads to a spatially varying transverse spin current in an adjacent non-spin-polarized material, where it gets converted into a measurable voltage. It has been previously observed with a magnitude of microvolts per kelvin in magnetically ordered materials, ferromagnetic metals, semiconductors and insulators. Here we describe a signal in a non-magnetic semiconductor (InSb) that has the hallmarks of being produced by the spin Seebeck effect, but is three orders of magnitude larger (millivolts per kelvin). We refer to the phenomenon that produces it as the giant spin Seebeck effect. Quantizing magnetic fields spin-polarize conduction electrons in semiconductors by means of Zeeman splitting, which spin-orbit coupling amplifies by a factor of ～25 in InSb. We propose that the giant spin Seebeck effect is mediated by phonon-electron drag, which changes the electrons' momentum and directly modifies the spin-splitting energy through spin-orbit interactions. Owing to the simultaneously strong phonon-electron drag and spin-orbit coupling in InSb, the magnitude of the giant spin Seebeck voltage is comparable to the largest known classical thermopower values.     

A spin triplet supercurrent through the half-metallic ferromagnet CrO2

In general, conventional superconductivity should not occur in a ferromagnet, though it has been seen in iron under pressure. Moreover, theory predicts that the current is always carried by pairs of electrons in a spin singlet state, so conventional superconductivity decays very rapidly when in contact with a ferromagnet, which normally prohibits the existence of singlet pairs. It has been predicted that this rapid spatial decay would not occur if spin triplet superconductivity could be induced in the ferromagnet. Here we report a Josephson supercurrent through the strong ferromagnet CrO2, from which we infer that it is a spin triplet supercurrent. Our experimental set-up is different from those envisaged in the earlier predictions, but we conclude that the underlying physical explanation for our result is a conversion from spin singlet pairs to spin triplets at the interface. The supercurrent can be switched with the direction of the magnetization, analogous to spin valve transistors, and therefore could enable magnetization-controlled Josephson junctions.     

Direct electronic measurement of the spin Hall effect

The generation, manipulation and detection of spin-polarized electrons in nanostructures define the main challenges of spin-based electronics. Among the different approaches for spin generation and manipulation, spin-orbit coupling--which couples the spin of an electron to its momentum--is attracting considerable interest. In a spin-orbit-coupled system, a non-zero spin current is predicted in a direction perpendicular to the applied electric field, giving rise to a spin Hall effect. Consistent with this effect, electrically induced spin polarization was recently detected by optical techniques at the edges of a semiconductor channel and in two-dimensional electron gases in semiconductor heterostructures. Here we report electrical measurements of the spin Hall effect in a diffusive metallic conductor, using a ferromagnetic electrode in combination with a tunnel barrier to inject a spin-polarized current. In our devices, we observe an induced voltage that results exclusively from the conversion of the injected spin current into charge imbalance through the spin Hall effect. Such a voltage is proportional to the component of the injected spins that is perpendicular to the plane defined by the spin current direction and the voltage probes. These experiments reveal opportunities for efficient spin detection without the need for magnetic materials, which could lead to useful spintronics devices that integrate information processing and data storage.     

自旋注入效率的电学探测

为了探测从铁磁FM（ferromagnet）到半导体SM（semiconductor）的自旋注入效率,可以通过增加另一个铁磁体来形成一个铁磁／半导体／铁磁（FM／SM／FM）的双结,通过直接测量此双结的磁阻效应,从而得到从铁磁（FM）到半导体（SM）节的自旋注入效率。理论分析发现其隧道磁阻TMR（tunnelling magnetore resistance）和自旋注入效率SIE（spin injection efficiency）之间有个普适关系：隧道磁阻是自旋注入效率的平方。这种平方关系在顺序隧穿区和散射区都成立,除非双结间半导体层厚度很长导致自旋翻转效应的发生或中间的半导体层厚度小于其相位相干长度而导致磁阻中出现量子相干效应。     

Electrical detection of spin precession in a metallic mesoscopic spin valve

To study and control the behaviour of the spins of electrons that are moving through a metal or semiconductor is an outstanding challenge in the field of 'spintronics', where possibilities for new electronic applications based on the spin degree of freedom are currently being explored. Recently, electrical control of spin coherence and coherent spin precession during transport was studied by optical techniques in semiconductors. Here we report controlled spin precession of electrically injected and detected electrons in a diffusive metallic conductor, using tunnel barriers in combination with metallic ferromagnetic electrodes as spin injector and detector. The output voltage of our device is sensitive to the spin degree of freedom only, and its sign can be switched from positive to negative, depending on the relative magnetization of the ferromagnetic electrodes. We show that the spin direction can be controlled by inducing a coherent spin precession caused by an applied perpendicular magnetic field. By inducing an average precession angle of 180 degrees, we are able to reverse the sign of the output voltage.     

Observation of spin Coulomb drag in a two-dimensional electron gas

An electron propagating through a solid carries spin angular momentum in addition to its mass and charge. Of late there has been considerable interest in developing electronic devices based on the transport of spin that offer potential advantages in dissipation, size and speed over charge-based devices. However, these advantages bring with them additional complexity. Because each electron carries a single, fixed value (- e) of charge, the electrical current carried by a gas of electrons is simply proportional to its total momentum. A fundamental consequence is that the charge current is not affected by interactions that conserve total momentum, notably collisions among the electrons themselves. In contrast, the electron's spin along a given spatial direction can take on two values, +/- [planck]/2 (conventionally upward arrow, downward arrow), so that the spin current and momentum need not be proportional. Although the transport of spin polarization is not protected by momentum conservation, it has been widely assumed that, like the charge current, spin current is unaffected by electron-electron (e-e) interactions. Here we demonstrate experimentally not only that this assumption is invalid, but also that over a broad range of temperature and electron density, the flow of spin polarization in a two-dimensional gas of electrons is controlled by the rate of e-e collisions.     

Transformation of spin information into large electrical signals using carbon nanotubes

Spin electronics (spintronics) exploits the magnetic nature of electrons, and this principle is commercially applied in, for example, the spin valves of disk-drive read heads. There is currently widespread interest in developing new types of spintronic devices based on industrially relevant semiconductors, in which a spin-polarized current flows through a lateral channel between a spin-polarized source and drain. However, the transformation of spin information into large electrical signals is limited by spin relaxation, so that the magnetoresistive signals are below 1% (ref. 2). Here we report large magnetoresistance effects (61% at 5 K), which correspond to large output signals (65 mV), in devices where the non-magnetic channel is a multiwall carbon nanotube that spans a 1.5 microm gap between epitaxial electrodes of the highly spin polarized manganite La(0.7)Sr(0.3)MnO3. This spintronic system combines a number of favourable properties that enable this performance; the long spin lifetime in nanotubes due to the small spin-orbit coupling of carbon; the high Fermi velocity in nanotubes that limits the carrier dwell time; the high spin polarization in the manganite electrodes, which remains high right up to the manganite-nanotube interface; and the resistance of the interfacial barrier for spin injection. We support these conclusions regarding the interface using density functional theory calculations. The success of our experiments with such chemically and geometrically different materials should inspire new avenues in materials selection for future spintronics applications.     

Microwave oscillations of a nanomagnet driven by a spin-polarized current

The recent discovery that a spin-polarized electrical current can apply a large torque to a ferromagnet, through direct transfer of spin angular momentum, offers the possibility of manipulating magnetic-device elements without applying cumbersome magnetic fields. However, a central question remains unresolved: what type of magnetic motions can be generated by this torque? Theory predicts that spin transfer may be able to drive a nanomagnet into types of oscillatory magnetic modes not attainable with magnetic fields alone, but existing measurement techniques have provided only indirect evidence for dynamical states. The nature of the possible motions has not been determined. Here we demonstrate a technique that allows direct electrical measurements of microwave-frequency dynamics in individual nanomagnets, propelled by a d.c. spin-polarized current. We show that spin transfer can produce several different types of magnetic excitation. Although there is no mechanical motion, a simple magnetic-multilayer structure acts like a nanoscale motor; it converts energy from a d.c. electrical current into high-frequency magnetic rotations that might be applied in new devices including microwave sources and resonators.     

Phase-locking in double-point-contact spin-transfer devices

Spin-transfer in nanometre-scale magnetic devices results from the torque on a ferromagnet owing to its interaction with a spin-polarized current and the electrons' spin angular momentum. Experiments have detected either a reversal or high-frequency (GHz) steady-state precession of the magnetization in giant magnetoresistance spin valves and magnetic tunnel junctions with current densities of more than 10(7) A cm(-2). Spin-transfer devices may enable high-density, low-power magnetic random access memory or direct-current-driven nanometre-sized microwave oscillators. Here we show that the magnetization oscillations induced by spin-transfer in two 80-nm-diameter giant-magnetoresistance point contacts in close proximity to each other can phase-lock into a single resonance over a frequency range from approximately <10 to >24 GHz for contact spacings of less than about approximately 200 nm. The output power from these contact pairs with small spacing is approximately twice the total power from more widely spaced (approximately 400 nm and greater) contact pairs that undergo separate resonances, indicating that the closely spaced pairs are phase-locked with zero phase shift. Phase-locking may enable control of large arrays of coupled spin-transfer devices with increased power output for microwave oscillator applications.     

磁性隧道结自旋极化电子隧穿的温度特性

基于自由电子模型，我们研究了铁磁金属／绝缘体（半导体）／铁磁金属隧道结自旋极化电子隧穿的温度特性。从我们的结论可以定性地解释有关的实验现象。     

基于有机分子亚铁磁体棱型自旋链外场下的热力学性质研究

基于近来有机高分子亚铁磁体在试验上成功的合成，本文采用量子转移矩阵方法，研究一维反铁磁-铁磁自旋1／2棱型自旋链在外场条件下低温下的热力学性质．磁化强度在低温下随外场的变化出现台阶式的平台结构，并表现出三个临界外场值，反映了系统磁相互耦合作用与热力学波动间的相互竞争；同时磁化率在外场下呈现双峰结构，其来源于系统在外场下的能隙和长程序参量的变化．本文的数值结果表明该棱型链与自旋1-1／2海森堡链性质一致．     

Electrical spin injection and accumulation at room temperature in an all-metal mesoscopic spin valve

Finding a means to generate, control and use spin-polarized currents represents an important challenge for spin-based electronics, or 'spintronics'. Spin currents and the associated phenomenon of spin accumulation can be realized by driving a current from a ferromagnetic electrode into a non-magnetic metal or semiconductor. This was first demonstrated over 15 years ago in a spin injection experiment on a single crystal aluminium bar at temperatures below 77 K. Recent experiments have demonstrated successful optical detection of spin injection in semiconductors, using either optical injection by circularly polarized light or electrical injection from a magnetic semiconductor. However, it has not been possible to achieve fully electrical spin injection and detection at room temperature. Here we report room-temperature electrical injection and detection of spin currents and observe spin accumulation in an all-metal lateral mesoscopic spin valve, where ferromagnetic electrodes are used to drive a spin-polarized current into crossed copper strips. We anticipate that larger signals should be obtainable by optimizing the choice of materials and device geometry.     

Spin-torque diode effect in magnetic tunnel junctions

There is currently much interest in the development of 'spintronic' devices, in which harnessing the spins of electrons (rather than just their charges) is anticipated to provide new functionalities that go beyond those possible with conventional electronic devices. One widely studied example of an effect that has its roots in the electron's spin degree of freedom is the torque exerted by a spin-polarized electric current on the spin moment of a nanometre-scale magnet. This torque causes the magnetic moment to rotate at potentially useful frequencies. Here we report a very different phenomenon that is also based on the interplay between spin dynamics and spin-dependent transport, and which arises from unusual diode behaviour. We show that the application of a small radio-frequency alternating current to a nanometre-scale magnetic tunnel junction can generate a measurable direct-current (d.c.) voltage across the device when the frequency is resonant with the spin oscillations that arise from the spin-torque effect: at resonance (which can be tuned by an external magnetic field), the structure exhibits different resistance states depending on the direction of the current. This behaviour is markedly different from that of a conventional semiconductor diode, and could form the basis of a nanometre-scale radio-frequency detector in telecommunication circuits.     

磁性隧道结中自旋相关输运的势垒影响

为了研究势垒对铁磁/绝缘层/半导体/绝缘层/铁磁(FM/I/SM/I/FM)双隧道结中自旋相关电子输运特性的影响,提出了在半导体层厚度合适的情况下,非对称势垒对于提高平行结构磁性双隧道结的自旋注入效率SIE(spin injection efficiency)更具优势.数值计算结果表明,当两势垒强度的比率达到合适数值时双结的SIE和隧穿磁电阻TMR(tunneling magnetore resistance)都将达到最大,这给提高从铁磁到半导体的SIE带来新选择.研究还表明,非对称势垒结构磁性隧道结中增大铁磁交换能对提高SIE和TMR都是有益的,而且铁磁交换能的增加对SIE的提高要比对TMR的提高更显著.     

铁磁/绝缘体/铁磁隧道结中的自旋流

考虑粗糙界面散射和自旋翻转,运用Slonczewsik模型,我们研究了铁磁/绝缘体/铁磁中的磁性隧穿,得到自旋电流密度表达式.在界面势垒比较低时,自旋电流受随粗糙界面散射和自旋翻转的强度改变明显.     

热辐射在倾斜通道热流场的作用

针对热辐射是通道内热流场的重要影响因素之一,采用实验和数值计算方法对倾斜角度为10°、20°和30°的两端开口通道内热流场进行了研究。使用基于大涡模拟(LES)求解浮力驱动N S方程的数值模拟方法求得的模拟结果和实验值吻合较好。通过使用耦合热辐射模型的数值计算结果和忽略热辐射的数值计算结果分别与实验结果进行对比分析的方法发现,在热源一定的条件下,对于倾斜角度在10°～30°之间的通道,热辐射使通道上部高温区域的温度降低,随着倾斜角度的增大,热辐射对通道低端开口上壁面附近的影响作用减弱,而倾斜角度对于热辐射在通道高端开口上壁面附近的作用则影响不大,同时,在通道倾斜角度为30°时,热辐射使通道内高温区域向高端开口方向倾斜,并使通道高端的下部温度升高。整个实验和计算结果可为倾斜通道内热流场的理论研究提供参考依据。     

Electronic spin transport and spin precession in single graphene layers at room temperature

Electronic transport in single or a few layers of graphene is the subject of intense interest at present. The specific band structure of graphene, with its unique valley structure and Dirac neutrality point separating hole states from electron states, has led to the observation of new electronic transport phenomena such as anomalously quantized Hall effects, absence of weak localization and the existence of a minimum conductivity. In addition to dissipative transport, supercurrent transport has also been observed. Graphene might also be a promising material for spintronics and related applications, such as the realization of spin qubits, owing to the low intrinsic spin orbit interaction, as well as the low hyperfine interaction of the electron spins with the carbon nuclei. Here we report the observation of spin transport, as well as Larmor spin precession, over micrometre-scale distances in single graphene layers. The 'non-local' spin valve geometry was used in these experiments, employing four-terminal contact geometries with ferromagnetic cobalt electrodes making contact with the graphene sheet through a thin oxide layer. We observe clear bipolar (changing from positive to negative sign) spin signals that reflect the magnetization direction of all four electrodes, indicating that spin coherence extends underneath all of the contacts. No significant changes in the spin signals occur between 4.2 K, 77 K and room temperature. We extract a spin relaxation length between 1.5 and 2 mum at room temperature, only weakly dependent on charge density. The spin polarization of the ferromagnetic contacts is calculated from the measurements to be around ten per cent.     

Enhanced thermoelectric performance of rough silicon nanowires

Approximately 90 per cent of the world's power is generated by heat engines that use fossil fuel combustion as a heat source and typically operate at 30-40 per cent efficiency, such that roughly 15 terawatts of heat is lost to the environment. Thermoelectric modules could potentially convert part of this low-grade waste heat to electricity. Their efficiency depends on the thermoelectric figure of merit ZT of their material components, which is a function of the Seebeck coefficient, electrical resistivity, thermal conductivity and absolute temperature. Over the past five decades it has been challenging to increase ZT > 1, since the parameters of ZT are generally interdependent. While nanostructured thermoelectric materials can increase ZT > 1 (refs 2-4), the materials (Bi, Te, Pb, Sb, and Ag) and processes used are not often easy to scale to practically useful dimensions. Here we report the electrochemical synthesis of large-area, wafer-scale arrays of rough Si nanowires that are 20-300 nm in diameter. These nanowires have Seebeck coefficient and electrical resistivity values that are the same as doped bulk Si, but those with diameters of about 50 nm exhibit 100-fold reduction in thermal conductivity, yielding ZT = 0.6 at room temperature. For such nanowires, the lattice contribution to thermal conductivity approaches the amorphous limit for Si, which cannot be explained by current theories. Although bulk Si is a poor thermoelectric material, by greatly reducing thermal conductivity without much affecting the Seebeck coefficient and electrical resistivity, Si nanowire arrays show promise as high-performance, scalable thermoelectric materials.     

半导体中纯自旋流的探测

自旋电子学是利用电子的自旋而非电子的电荷作为信息载体而发展的物理和电子器件研究的分支领域.半导体中自旋流的测量在自旋电子学中起关键作用.本文从自旋流的基本性质出发,简要回顾了目前国际上探测自旋流的实验手段,以及作者最近提出的有关自旋流的光学效应和以此直接测量半导体中纯自旋流的理论.