盾构机密封舱渣土非线性本构模型参数识别

根据密封舱改性渣土的三轴压缩实验数据,建立了基于优化方法的Duncan-Chang双曲线本构模型参数反演方法。为了解决参数识别反问题解的不稳定性问题,在Gauss-Newton优化迭代算法的基础上,提出了正则化参数反演方法。实际应用结果表明,所提出的反演方法具有较快的收敛速度和较强的鲁棒性,预测的实验模型变形与实验值吻合较好。     

Preparation of Al<Subscript>72</Subscript>Ni<Subscript>8</Subscript>Ti<Subscript>8</Subscript>Zr<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Y<Subscript>3</Subscript> amorphous powders and bulk materials

Amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were successfully fabricated by mechanical alloying. The microstructure, glass-forming ability, and crystallization behavior of amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). The isothermal crystallization kinetics was analyzed by the Johnson–Mehl–Avrami equation. In the results, the supercooled liquid region of the amorphous alloy is as high as 81 K, as determined by non-isothermal DSC curves. The activation energy for crystallization is as high as 312.6 kJ·mol?1 obtained by Kissinger and Ozawa analyses. The values of Avrami exponent (n) imply that the crystallization is dominated by interface-controlled three-dimensional growth in the early stage and the end stage and by diffusion-controlled two- or three-dimensional growth in the middle stage. In addition, the amorphous Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ powders were sintered under 2 GPa at temperatures of 673 K and 723 K. The results show that the Vickers hardness of the compacted powders is as high as Hv 1215.     

Acid etching process for fabrication of Bi2Sr2CaCu2O8＋x stack

We adopted a new method, acid etching process, to fabricate the intrinsic Josephson junctions based on the Bi2Sr2CaCu2O8 x single crystals. By soaking the crystals into the dilute hydrochloric acid, we fabricated a junction stack successfully, and meantime made the surrounding area insulated. A certain concentration of hydrochloric acid was used to maintain the roughness of the modified layer. The cur-rent-voltage characteristic was achieved through the four terminal measurement. We could control the junctions' number by changing the concentration and the soaking time. We also found that the thick-ness of the stack was equal to the average height of the insulation layer. Such a simple, convenient and controllable fabrication method with a high yield might widen the applications of the intrinsic Joseph-son junctions.     

Electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.3</Subscript>Ti<Subscript>0.2</Subscript>O<Subscript>4</Subscript>/Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> cells

Spinel compounds LiNi_0.5Mn_1.3Ti_0.2O₄ (LNMTO) and Li₄Ti₅O₁₂ (LTO) were synthesized by different methods. The particle sizes of LNMTO and LTO are 0.5–2 and 0.5–0.8 μm, respectively. The LNMTO/LTO cell exhibits better electrochemical properties at both a low current rate of 0.2C and a high current rate of 1C. When the specific capacity was determined based on the mass of the LNMTO cathode, the LNMTO/LTO cell delivered 137 mA·h·g⁻¹ at 0.2C and 118.2 mA·h·g⁻¹ at 1C, and the corresponding capacity retentions after 30 cycles are 88.5% and 92.4%, respectively.     

基于遗传算法的带附加气室空气悬架多目标优化

以带附加气室的空气弹簧悬架为研究对象,按照物理模型建立带附加气室空气弹簧的数学模型,考虑到空气弹簧刚度的非线性,将该模型以空气弹簧非线性力的形式直接引入到1/4车辆模型。以提高车辆平顺性、行驶安全性及操纵稳定性的综合性能为目标,以附加气室容积为优化变量,设计带附加气室空气悬架的多目标优化模型;考虑到悬架性能各指标量在量纲与量级上的差异,对各指标量进行统一化处理,并采用线性加权和法将多目标函数转化为单目标评价函数。在MAT-LAB/Simulink中搭建系统仿真模型,采用遗传优化算法对典型工况下的最优附加气室容积进行寻优。优化结果表明,优化附加气室容积能有效提高悬架的综合性能,降低车身加速度、悬架动行程,但轮胎动载荷有所增加。     

Rolling-induced microstructure change in Zr_（65）Al_（7.5）Ni_（10）Cu_（12.5）Ag_5 bulk metallic glass

The microstructures and free-volume evolutions of as-cast and pre-annealed Zr65Al7.5Ni10Cu12.5Ag5 bulk metallic glasses during rolling deformation have been investigated. No phase transformation is detected in the as-cast/rolled specimen. However,the structural stability of the glass against plastic deformation is worse after pre-annealing,indicated by nanocrystallization in preannealed/rolled specimens with large deformation degrees. Moreover,with increasing deformation degree,the free-volume content in a pre-annealed/rolled specimen increases at a lower average rate than that in an as-cast/rolled specimen.     

Kinetic parameters of oscillating reaction of amino acid- BrO3^——Mn^2＋-H2SO4-acetone system

In the previous papers[1—3], the oscillating reactionusing amino acids as organic substrates was studied. Inorder to obtain information about the kinetic parameters ofoscillating reaction of amino acids in amino acid- BrO3 - ?Mn2 -H2SO4-acetone sy…     

Work toughening effect in Zr_（41）Ti_（14）Cu_（12.5）Ni_（10）Be_（22.5） bulk metallic glass

Work hardening is a well-known phenomenon occurring in crystalline metals during deformation,which has been widely used to increase the strength of metals although their ductility is usually reduced simultaneously. Here we report that the plastic strain of Zr41Ti14Cu12.5Ni10Be22.5 (at.%) bulk metallic glasses has been increased from 0.3% for the as-cast sample to 2.5%-8.0% for samples that have experienced pre-deformation under constrained conditions. The pre-deformed glassy alloys possess more free volume and abundant introduced shear bands,which are believed to promote the activation of shear bands in post-deformation and result in an increase in plasticity. The orientation of the pre-introduced shear bands relative to the loading direction will affect the deformation behavior of pre-deformed samples. The present results show that pre-deformation of this glassy alloy will result in work toughening. This work toughening effect can be removed by isothermal annealing at a sub-Tg (glass transition) temperature,which causes annihilation of free volume and healing of shear bands.     

Mutagenesis of Ser24 of Cytochrome b559 α Subunit Affects PSII Acitivies in Chlamydomonas reinhardtii

In order to study the functions of cytochrome b559 (Cyt b559) in photosystem two (PSII) activity, mutant S24F of Chlamydomonas reinhardtii was constructed using site directed mutagenesis, in which Serine24 (Ser24) locating downstream of Histidine23 (His23) in α subunit of Cyt b559 was replaced by Phenylalanine (Phe). Physiological and biochemical analysis showed that mutant S24F could be grown photoautotrophically or photoheterotrophically. However, their growth rate was slower either on HSM or TAP medium than that of the control; Analysis of PSII activity revealed that its oxygen evolution was about 71% of wild type (WT); The Photochemical efficiency of PSII (Fv/Fm) of S24F was reduced 0.23 compared with WT; S24F was more sensitive to strong light irradiance than the wild type; Furthermore, SDS-PAGE and Western-blotting analysis indicated that the expression levels of α subunit of Cyt b559, LHCII and PsbO of S24F were a little less than those of the wild type. Overall, these data suggests that Ser24 plays a significant role in making Cyt b559 structure maintain PSII complex activity of oxygen evolution although it is not directly bound to heme group.     

Synthesis, Characterization and Calorimetry of Ni（C4H8N2O3）2Cl2

A coordination complex was synthesized from NiCl2 and dipeptide glycylglycine（GG）. It was characterized by element analysis, NMR and TG methods, and then was determined to be Ni（C4HsN2O3）2Cl2. Using an isoperibolic reaction calorimeter, the standard molar enthalpy of formation of Ni（GG）2Cl2（solid） has been determined to be -（1 674.66±2.02） kJ · mol^-1 at 298.15 K.     

The R- and AR-indices： Complementing the h-index

Based on the foundation laid by the h-index we introduce and study the R- and AR-indices. These new indices eliminate some of the disadvantages of the h-index, especially when they are used in combina-tion with the h-index. The R-index measures the h-core’s citation intensity, while AR goes one step further and takes the age of publications into account. This allows for an index that can actually in-crease and decrease over time. We propose the pair (h, AR) as a meaningful indicator for research evaluation. We further prove a relation characterizing the h-index in the power law model.     

Super-plasticity of Zr<Subscript>64.80</Subscript>Cu<Subscript>14.85</Subscript>Ni<Subscript>10.35</Subscript>Al<Subscript>10</Subscript> bulk metallic glass at room temperature

Generally, bulk metallic glasses （BMGs） exhibit a very limited plastic deformation under a compression load at room temperature, often less than 2% before fracturing. In this letter, through an appropriate choice of BMGs＇ composition, an amorphous rod of Zr64.80Cu14.85Ni10.35Al10 with a diameter of 2 mm was prepared by using copper mold suction casting. X-ray diffraction and differential scanning calorimetry were utilized to determine its structure and thermal stability, and the uniaxial compression test was adopted to study its plastic deformation behavior at room temperature simultaneously. The results showed that the glass transition temperature and onset temperature of the exothermic reaction of the amorphous rod were 646 and 750 K, respectively, and its micro-hardness was 594.7 Hv. During compression, when the engineering strain and engineering stress arrived at 9.05% and 1732 MPa, respectively, i.e., the true strain and true stress reached 9.42% and 1560 MPa, respectively, the amorphous rod started to yield. After yielding, with the increase of load, the strain increased and the glass rod ulti- mately were compressed into flake-like form. Although the maximum engineering strain was larger than 70%, i.e., the maximum true strain exceeded by 120%, the amorphous specimen was not fractured, indicating that it has super-plasticity at room temperature. Through the appropriate choice of composition and optimization of the technological process, flexible BMG with super-plasticity at room temperature could be produced.     

Investigation on high magnetoresistance Ni0.81Fe0.19 films grown on （Ni0.81Fe0.19）1-xCrx underlayers

We have fabricated Ni0.18Fe0.19 films with (Ni0.18Fe0.19)1-xCrx films as underlayers by dc magnetron sputtering, the results show that larger anisotropic magnetoresistance (△R/R) values of Ni0.18Fe0.19 films are observed using the underlayers with Cr concentration of -36 at.% at an optimum underlayer thickness of -4.4 nm, the maximum AMR value is 3.35%. The results of atomic force microscope (AFM) and X-ray diffraction (XRD) show that the △R/R enhancement is attributed to the formation of large average grain size and the strong(111)texture in the Ni0.18Fe0.19 films.     

<Emphasis Type="Italic">In situ</Emphasis> synthesis of TiC reinforced Cu<Subscript>47</Subscript>Ti<Subscript>34</Subscript>Zr<Subscript>11</Subscript>Ni<Subscript>8</Subscript> bulk metallic glass composites

In situ synthesized TiC particles and β-Ti dendrites reinforced Cu47Ti34Zr11Ni8 bulk metallic glass (BMG) composite ingots were prepared by the suction casting method.The ingots with diameters from 1 up to 4mm were successfully obtained. It was shown that introducing TiC micro-sized particles into the amorphous matrix did not disturb the glass forming ability (GFA) of the matrix,while the yield strength and ductility could be well improved.The phase constitution, microstructure and elements distribution in the composites were studied by OM, XRD, SEM and EDS.It was shown that the in situ synthesized TiC particles acting as heterogeneous nucleation sites promoted the precipitation of β-Ti dendrites, resulting in the formation of the TiC particles and β-Ti dendrites co-reinforced BMG composites. The compressive tests were employed to probe the yield strength and ductility of BMG composites.     

Temperature effect on the corrosion and passivation characterization of Ni<Subscript>82.3</Subscript>Cr<Subscript>7</Subscript>Fe<Subscript>3</Subscript>Si<Subscript>4.5</Subscript>B<Subscript>3.2</Subscript> alloy in acidic media

The effects of temperature on corrosion and the electrochemical behavior of Ni_82.3Cr₇Fe₃Si_4.5B_3.2 glassy alloy in HCl, H₂SO₄, and H₃PO₄ acids were studied using AC and DC techniques. Impedance data reveal that the susceptibility to localized corrosion increases with increasing temperature. Potentiodynamic polarization curves reveal that the bulk glassy alloy is spontaneously passivated at all the investigated temperature in H₂SO₄ and H₃PO₄ solutions. A localized corrosion effect in HCl solution is clearly observed. The apparent activation energies in the regions of Tafel, active, and passive, as well as the enthalpies and entropies of the dissolution process were determined and discussed. The high apparent activation energy (E_a) value for H₃PO₄ solution in Tafel region is explained by the low aggressivity of PO₄3- ions.     

Dissolution of Al<Subscript>2</Subscript>TiO<Subscript>5</Subscript> inclusions in CaO-SiO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> slags at 1823 K

Al-Ti-O inclusions always clog submerged nozzles in Ti-bearing Al-killed steel. A typical synthesized Al₂TiO₅ inclusion was immersed in a CaO-SiO₂-Al₂O₃ molten slag for different durations at 1823 K. The Al₂TiO₅ dissolution paths and mechanism were revealed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Decreased amounts of Ti and Al and increased amounts of Si and Ca at the dissolution boundary prove that inclusion dissolution and slag penetration simultaneously occur. SiO₂ diffuses or penetrates the inclusion more quickly than CaO, as indicated by the w(CaO)/w(SiO₂) value in the reaction region. A liquid product (containing 0.7–1.2 w(CaO)/w(SiO₂), 15wt%–20wt% Al₂O₃, and 5wt%–15wt% TiO₂) forms on the inclusion surface when Al₂TiO₅ is dissolved in the slag. Al₂TiO₅ initially dissolves faster than the diffusion rate of the liquid product toward the bulk slag. With increasing reaction time, the boundary reaches its largest distance, the Al₂TiO₅ dissolution rate equals the liquid product diffusion rate, and the dissolution process remains stable until the inclusion is completely dissolved.     

Intense laser induced field ionization of C<Subscript>2</Subscript>H<Subscript>2</Subscript>, C<Subscript>2</Subscript>H<Subscript>4</Subscript>, and C<Subscript>2</Subscript>H<Subscript>6</Subscript>

Using HOMO Field Ionization Model, the tunneling probabilities and the theoretical threshold intensities of the field ionizations of acetylene, ethylene, and ethane in intense laser field are calculated. C2H2, C2H4, and C2H6 were irradiated by 800 nm, 100 fs laser pulses with the intensity range of 10^13-10^14 W/cm^2. A TOF-mass spectrometer was coupled to the laser system and used to experimentally investigate the field ionization of these molecules. The experimental ionization threshold intensities are obtained. The calculating results of the three molecules agree well with the experimental results, indicating that HOMO Field Ionization Model is valid for the ionization of polyatomic molecules in intense laser field.     

说“休”道“闲”

论述"休"、"闲"二字的原初构形意图,梳理二者意义发展的线索及其与相关字词的意义联系。指出休的字形构意与表示哺乳的乳字有相似之处,人对自然物的依赖犹如小孩对母亲的依赖,是文章的一个亮点。     

One-pot synthesis of PVP-coated Ni<Subscript>0.6</Subscript>Fe<Subscript>2.4</Subscript>O<Subscript>4</Subscript> nanocrystals

Novel poly(N-vinyl-2-pyrrolidone) (PVP)-coated nickel ferrite nanocrystals were prepared by simultaneously pyrolyzing nickel(II) acetylacetonate (Ni(acac)₂) and iron(III) acetylacetonate (Fe(acac)₃) in N-vinyl-2-pyrrolidone (NVP). The PVP coating was formed in situ through polymerization of NVP. The crystalline structure of the resultant nickel ferrite was analyzed by high-resolution transmission electron microscopy, electron diffraction patterns, and powder X-ray diffraction. In addition, the valence state of Ni and the metal contents of Ni and Fe in different valence states were analyzed by X-ray photoelectron spectroscopy (XPS), atomic absorption and the phenanthroline method. The surface coating layer of PVP and its binding states were characterized by Fourier transform infrared spectroscopy in combination with XPS. Colloidal stability experiments revealed that the nanocrystals could be dispersed well in both phosphate-buffered saline and Dulbecco’s Modified Eagle Medium.     

Effect of proton irradiation on structure relaxation of Zr<Subscript>41.5</Subscript>Ti<Subscript>14.9</Subscript>Cu<Subscript>12.6</Subscript>Ni<Subscript>10.5</Subscript>Be<Subscript>20.4</Subscript> bulk metallic glass

Effects of proton irradiation on structure re-laxation of Zr_(41.5)Ti_(14.9)Cu_(12.6)Ni_(10.5)Be_(20.4) bulk metallic glass areinvestigated by means of X-ray diffraction, differential scan-ning calorimetric and electronic resistance measurements.The results show that, at 203 K, the structure ofZr_(41.5)Ti_(14.9)Cu_(12.6)Ni_(10.5)Be_(20.4) bulk metal glass is relaxed obvi-ously by proton irradiation with the energy and the dosebeing of 160 keV and 1.65×10~(16) ions/cm~2, respectively. How-ever, Zr_(41 .5)Ti_(14.9)Cu_(12.6)Ni_(10.5)Be_(20.4) bulk metallic glass becomesmore steady amorphous state under two conditions, one isthat the energy and the dose are 160 keV and 1.1×10~(15)ions/cm~2, respectively. Another is that the energy and thedose are 120 keV and 6.5×10~(15) ions/cm~2, respectively.