TiO2/Al2O3-Al2O3-TiO2/Al2O3绝缘结构的真空沿面闪络特性

基于变插入层介电常数的多层绝缘结构能改善电场分布、提高真空沿面闪络特性.通过真空热压烧结制备了TiO2/Al2O3-Al2O3-TiO2/Al2O3(A-B-A)3层绝缘结构,A层w(TiO2)为0.5%到20%.测量了该绝缘结构的真空沿面闪络特性,发现闪络特性随w(TiO2)的增加而提高,当w(TiO2)为20%时,其脉冲初次闪络电压较同等厚度的Al2O3陶瓷提高了63%.研究发现:A层的介电常数可由w(TiO2)调控,介电常数的增大能有效降低真空-绝缘子-阴极三结合点处的电场强度;A层表面存在的TiO2颗粒可以减小二次电子发射系数并改善表面电荷分布;TiO2的电导率虽比Al2O3高,但其仍为绝缘体,即使TiO2含量较高时也不会形成贯穿的导电通道.     

CaO-ZrO2-TiO2-Al2O3-B2O3-SiO2玻璃陶瓷的制备及化学稳定性研究

玻璃陶瓷是固化处理中、高放废物和α废物较为理想的候选材料之一。研究了特定条件下制备的CaO-ZrO2-TiO2-Al2O3-B2O3-SiO2体系玻璃陶瓷在水淬和空气中自然冷却的两种冷却制度对其结晶行为和显微结构的影响,用粉末浸泡实验方法测试了其化学稳定性。结果表明:自然冷却形成的玻璃陶瓷晶相主要是ZrSiO4和ZrTiO4;在25～70℃范围内,温度对玻璃陶瓷浸出率无明显影响,90℃下浸出率比25℃,40℃,70℃的浸出率高一个数量级;7 d元素总的归一化浸出为1.87 g/m2。     

纳米Fe2O3-Al2O3复合材料的制备

采用溶胶-凝胶表面包覆法制备了纳米Fe₂O₃-Al₂ O₃复合材料, 利用X射线衍射和透射电镜对样品的物相、 粒度和形貌进行了研 究. 结果表明, α-Fe₂O₃掺杂降低了Al₂O₃相变温度, 在900 ℃可以得到稳定的α-Al₂O₃相.     

在Na3AlF6-AlF3-CaF2-LiF-Al2O3体系中低温铝电解

Based on the main physico-chemical properties of Na₃AlF₆-AlF₃-CaF₂-LiF-Al₂O₃ system studied, including liquidus temperature、electrical conductivity and bath density, a laboratory scale vertical discharging aluminum type electrolysis cell of about 100A capacity was run with TiB₂ cathodes and low molar ratio(1.5～2.0) electrolytes at 800～930℃ range. Aluminum metal was obtained with 84.6%～88.3% current efficiencies and 11.54～11.83 kW^.h/kg specific energy consumption.     

Crystallization Mechanism of Na2O-CaO-Al2O3-SiO2-F- Glass Containing Cr2O3

The effect of Cr₂O₃ on the nucleation and crystallization of Na₂O-CaO-Al₂O₃-SiO₂-F- glass has been investigated by means of ESR(Electron Spin Resonance), SEM(Scanning Electron Microscope), EDS(Energy Dispersive Specrometer) and so on. Computer pattern recognition is applied to optimize the heat-treatment schedules. The experimental results show that the base glass containing more than 1.5 % (mass fraction) Cr₂O₃ can be nucleated internally and converted to spheroidal crystal glass materials. The spheroidal crystal consisted of fibrous wollastonite crystals radiating from a center. The residual glass phase filled in the interstices between the fibers and between the spherulites. During heat treatment process, the valence states ofchromium changed from Cr6- to Cr3-, and the Cr-spinel solidsolution [CaCr₂O₄] precipitated followed this valence change. At the primary stage of crystallization, the Cr-spinel could act as a nucleating center on which the principal or}stalline phase β-CaSiO₃ grew epitaxially.     

Al2O3-SiO2∶Ln3+发光陶瓷的合成及发光行为

采用溶胶-凝胶法合成出了Al     

Effect of Fe2O3 on the size and components of spinel crystals in the CaO-SiO2-MgO-Al2O3-Cr2O3 system

size of spinel crystals in the CaO-SiO₂-MgO-Al₂O₃-Cr₂O₃ system was investigated using lab experiments carried out in a carbon tube furnace. Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) and X-ray diffraction (XRD) were used to analyze the microstructure, components, and the mineral phases of synthetic slags. FactSage 7.1 was used to calculate the crystallization process of the molten slag. The results showed that the addition of Fe₂O₃ promoted the precipitation of spinel crystals and inhibited the formation of dicalcium silicate. The size of spinel crystals increased from 2.74 to 8.10 μm and the contents of chromium and iron in the spinel varied as the Fe₂O₃ addition was increased from 0 to 20wt%. Fe₂O₃ thermodynamically provided the spinel-forming components to enhance the formation of FeCr₂O₄, MgFe₂O₄, and Fe₃O₄. The addition of Fe₂O₃ increased the fraction of liquid phase in a certain temperature range and promoted diffusion by decreasing the slag's viscosity. Therefore, Fe₂O₃ is beneficial to the growth of spinel crystals in stainless steel slag.     

固体超强酸S2O8^2—／ZrO2—Al2O3催化合成对羟基苯甲酸乙酯

报道了一种以对羟基苯甲酸和乙醇为原料合成对羟基苯甲酸乙酯的新方法,即在固体超强酸S2O8^2-/ZrO2-Al2O催化下,用子筛作脱水剂,采用索氏提取器进行回流脱水直接酯化。并考察醇酸比、反应时间、催化剂用量等因素对酯产率的影响。     

Sb2Se3-Sb2S3两端叠层薄膜太阳能电池

设计并制备一种全锑基两端叠层薄膜太阳能电池，其结构为ITO/CdS/Sb₂S₃/Au/ZnO/Sb₂Se₃/Au.通过快速热蒸发法制备Sb₂Se₃和Sb₂S₃薄膜，该薄膜具有良好的结晶性.测试表明，器件中各层薄膜的能级互相匹配，并且可实现光谱的分段利用. Sb₂Se₃-Sb₂S₃两端叠层电池的光电转换效率达到3.25%,其开路电压为0.98 V,可基本实现开压叠加.