Imaging and dynamics of light atoms and molecules on graphene

Observing the individual building blocks of matter is one of the primary goals of microscopy. The invention of the scanning tunnelling microscope revolutionized experimental surface science in that atomic-scale features on a solid-state surface could finally be readily imaged. However, scanning tunnelling microscopy has limited applicability due to restrictions in, for example, sample conductivity, cleanliness, and data acquisition rate. An older microscopy technique, that of transmission electron microscopy (TEM), has benefited tremendously in recent years from subtle instrumentation advances, and individual heavy (high-atomic-number) atoms can now be detected by TEM even when embedded within a semiconductor material. But detecting an individual low-atomic-number atom, for example carbon or even hydrogen, is still extremely challenging, if not impossible, via conventional TEM owing to the very low contrast of light elements. Here we demonstrate a means to observe, by conventional TEM, even the smallest atoms and molecules: on a clean single-layer graphene membrane, adsorbates such as atomic hydrogen and carbon can be seen as if they were suspended in free space. We directly image such individual adatoms, along with carbon chains and vacancies, and investigate their dynamics in real time. These techniques open a way to reveal dynamics of more complex chemical reactions or identify the atomic-scale structure of unknown adsorbates. In addition, the study of atomic-scale defects in graphene may provide insights for nanoelectronic applications of this interesting material.     

Electron tomography at 2.4-ångström resolution

Transmission electron microscopy is a powerful imaging tool that has found broad application in materials science, nanoscience and biology. With the introduction of aberration-corrected electron lenses, both the spatial resolution and the image quality in transmission electron microscopy have been significantly improved and resolution below 0.5??ngstr?ms has been demonstrated. To reveal the three-dimensional (3D) structure of thin samples, electron tomography is the method of choice, with cubic-nanometre resolution currently achievable. Discrete tomography has recently been used to generate a 3D atomic reconstruction of a silver nanoparticle two to three nanometres in diameter, but this statistical method assumes prior knowledge of the particle's lattice structure and requires that the atoms fit rigidly on that lattice. Here we report the experimental demonstration of a general electron tomography method that achieves atomic-scale resolution without initial assumptions about the sample structure. By combining a novel projection alignment and tomographic reconstruction method with scanning transmission electron microscopy, we have determined the 3D structure of an approximately ten-nanometre gold nanoparticle at 2.4-?ngstr?m resolution. Although we cannot definitively locate all of the atoms inside the nanoparticle, individual atoms are observed in some regions of the particle and several grains are identified in three dimensions. The 3D surface morphology and internal lattice structure revealed are consistent with a distorted icosahedral multiply twinned particle. We anticipate that this general method can be applied not only to determine the 3D structure of nanomaterials at atomic-scale resolution, but also to improve the spatial resolution and image quality in other tomography fields.     

Images of single-stranded nucleic acids by scanning tunnelling microscopy

The scanning tunnelling microscope has the potential to resolve the structure of biological molecules with atomic detail. Progress has been made in the imaging of dried, unshadowed double helices of DNA4-7 and in recording images of DNA under water. Also, images of unshadowed complexes of DNA with the RecA protein from Escherichia coli indicate that this technique may not be restricted to thin biological samples. Here we present images of polydeoxyadenylate molecules aligned in parallel, with their bases lying flat on a surface of highly oriented pyrolytic graphite and with their charged phosphodiester backbones protruding upwards. Based on these images, a molecular model has been built which suggests the presence of a hydrogen bond that could stabilize the parallel alignment. Our micrographs demonstrate the potential application of scanning tunnelling microscopy in structural studies of nucleic acids and provide evidence that it could be used to sequence DNA.     

Protein images obtained by STM, AFM and TEM.

Scanning tunnelling microscopy and atomic force microscopy, one scanning the tunnelling current and the other the repulsive atomic force between same and probe, can give high-quality surface topographies of proteins, which have been difficult to obtain by more conventional methods such as transmission electron microscopy.     

Atom-by-atom spectroscopy at graphene edge

The properties of many nanoscale devices are sensitive to local atomic configurations, and so elemental identification and electronic state analysis at the scale of individual atoms is becoming increasingly important. For example, graphene is regarded as a promising candidate for future devices, and the electronic properties of nanodevices constructed from this material are in large part governed by the edge structures. The atomic configurations at graphene boundaries have been investigated by transmission electron microscopy and scanning tunnelling microscopy, but the electronic properties of these edge states have not yet been determined with atomic resolution. Whereas simple elemental analysis at the level of single atoms can now be achieved by means of annular dark field imaging or electron energy-loss spectroscopy, obtaining fine-structure spectroscopic information about individual light atoms such as those of carbon has been hampered by a combination of extremely weak signals and specimen damage by the electron beam. Here we overcome these difficulties to demonstrate site-specific single-atom spectroscopy at a graphene boundary, enabling direct investigation of the electronic and bonding structures of the edge atoms-in particular, discrimination of single-, double- and triple-coordinated carbon atoms is achieved with atomic resolution. By demonstrating how rich chemical information can be obtained from single atoms through energy-loss near-edge fine-structure analysis, our results should open the way to exploring the local electronic structures of various nanodevices and individual molecules.     

Radio-frequency scanning tunnelling microscopy

The scanning tunnelling microscope (STM) relies on localized electron tunnelling between a sharp probe tip and a conducting sample to attain atomic-scale spatial resolution. In the 25-year period since its invention, the STM has helped uncover a wealth of phenomena in diverse physical systems--ranging from semiconductors to superconductors to atomic and molecular nanosystems. A severe limitation in scanning tunnelling microscopy is the low temporal resolution, originating from the diminished high-frequency response of the tunnel current readout circuitry. Here we overcome this limitation by measuring the reflection from a resonant inductor-capacitor circuit in which the tunnel junction is embedded, and demonstrate electronic bandwidths as high as 10 MHz. This approximately 100-fold bandwidth improvement on the state of the art translates into fast surface topography as well as delicate measurements in mesoscopic electronics and mechanics. Broadband noise measurements across the tunnel junction using this radio-frequency STM have allowed us to perform thermometry at the nanometre scale. Furthermore, we have detected high-frequency mechanical motion with a sensitivity approaching approximately 15 fm Hz(-1/2). This sensitivity is on par with the highest available from nanoscale optical and electrical displacement detection techniques, and the radio-frequency STM is expected to be capable of quantum-limited position measurements.     

先进陶瓷材料性能优化中的微观结构设计

对先进陶瓷材料（氮化硅,碳化硅,氧化铝与碳化硅纳米复合材料）的微观结构特征,特别是它与宏观性能的关系进行了评述。联合运用材料物理与材料化学的分析方法能够为优化先进陶瓷的性能而进行的微观结构设计提供有用的信息,利用航向电子显微镜（ＴＥＭ）,用分辨航向子显微镜（ＨＲＴＥＭ）,扫描透射电为微镜（ＳＴＥＭ）,分析电子显微镜（ＡＥＭ）和二次离子质谱仪（ＳＩＭＳ）对陶瓷晶界／界面所进行的物理（微观结构）和化学     

Thermal radiation scanning tunnelling microscopy

In standard near-field scanning optical microscopy (NSOM), a subwavelength probe acts as an optical 'stethoscope' to map the near field produced at the sample surface by external illumination. This technique has been applied using visible, infrared, terahertz and gigahertz radiation to illuminate the sample, providing a resolution well beyond the diffraction limit. NSOM is well suited to study surface waves such as surface plasmons or surface-phonon polaritons. Using an aperture NSOM with visible laser illumination, a near-field interference pattern around a corral structure has been observed, whose features were similar to the scanning tunnelling microscope image of the electronic waves in a quantum corral. Here we describe an infrared NSOM that operates without any external illumination: it is a near-field analogue of a night-vision camera, making use of the thermal infrared evanescent fields emitted by the surface, and behaves as an optical scanning tunnelling microscope. We therefore term this instrument a 'thermal radiation scanning tunnelling microscope' (TRSTM). We show the first TRSTM images of thermally excited surface plasmons, and demonstrate spatial coherence effects in near-field thermal emission.     

Chemical identification of individual surface atoms by atomic force microscopy

Scanning probe microscopy is a versatile and powerful method that uses sharp tips to image, measure and manipulate matter at surfaces with atomic resolution. At cryogenic temperatures, scanning probe microscopy can even provide electron tunnelling spectra that serve as fingerprints of the vibrational properties of adsorbed molecules and of the electronic properties of magnetic impurity atoms, thereby allowing chemical identification. But in many instances, and particularly for insulating systems, determining the exact chemical composition of surfaces or nanostructures remains a considerable challenge. In principle, dynamic force microscopy should make it possible to overcome this problem: it can image insulator, semiconductor and metal surfaces with true atomic resolution, by detecting and precisely measuring the short-range forces that arise with the onset of chemical bonding between the tip and surface atoms and that depend sensitively on the chemical identity of the atoms involved. Here we report precise measurements of such short-range chemical forces, and show that their dependence on the force microscope tip used can be overcome through a normalization procedure. This allows us to use the chemical force measurements as the basis for atomic recognition, even at room temperature. We illustrate the performance of this approach by imaging the surface of a particularly challenging alloy system and successfully identifying the three constituent atomic species silicon, tin and lead, even though these exhibit very similar chemical properties and identical surface position preferences that render any discrimination attempt based on topographic measurements impossible.     

Chiral recognition in dimerization of adsorbed cysteine observed by scanning tunnelling microscopy

Stereochemistry plays a central role in controlling molecular recognition and interaction: the chemical and biological properties of molecules depend not only on the nature of their constituent atoms but also on how these atoms are positioned in space. Chiral specificity is consequently fundamental in chemical biology and pharmacology and has accordingly been widely studied. Advances in scanning probe microscopies now make it possible to probe chiral phenomena at surfaces at the molecular level. These methods have been used to determine the chirality of adsorbed molecules, and to provide direct evidence for chiral discrimination in molecular interactions and the spontaneous resolution of adsorbates into extended enantiomerically pure overlayers. Here we report scanning tunnelling microscopy studies of cysteine adsorbed to a (110) gold surface, which show that molecular pairs formed from a racemic mixture of this naturally occurring amino acid are exclusively homochiral, and that their binding to the gold surface is associated with local surface restructuring. Density-functional theory calculations indicate that the chiral specificity of the dimer formation process is driven by the optimization of three bonds on each cysteine molecule. These findings thus provide a clear molecular-level illustration of the well known three-point contact model for chiral recognition in a simple bimolecular system.     

基于3D技术的金属结构件断口形貌重建方法

针对利用扫描电子显微镜观察失效断口无法掌握宏观立体位置的问题，借助超景深数码显微镜和3D打印等多种3D技术提出解决方案。首先利用3D技术对断口进行成像，建立断口的3D立体形貌；然后利用计算机辅助技术建立断口的三维实体模型；最后借助该模型辅助扫描电子显微镜的断口显微观察。结果表明，3D技术可以很好地应用于金属结构件失效分析领域。     

Electron microscopy of frozen-hydrated biological material

The electron microscopy of frozen-hydrated specimens has the potential to allow biological material to be examined in conditions very similar to the native state, and so has excited considerable interest. Although not all of the problems associated with the method have been solved, the technique has already provided important insights into macromolecular structure and assembly and promises to be a powerful tool for investigating the structure of cellular components and their interactions.     

Envelope structure of Semliki Forest virus reconstructed from cryo-electron micrographs

The basic principles of the architecture of many viral protein shells have been successfully established from electron microscopy and X-ray data, but enveloped viruses have been more difficult to study because they resist crystallization and are easily deformed when prepared for electron microscopy. To avoid the limitations of conventional techniques when applied to enveloped viruses, we have used a cryo-electron microscopy method in which unfixed and unstained viruses are observed in an unsupported thin layer of vitrified suspension. Because of electron beam damage, the many different views required for high-resolution three-dimensional reconstruction cannot be obtained from a tilt series of the same particle. The images of many differently oriented viruses are combined using a novel reconstruction method, 'reconstruction by optimized series expansion' (ROSE). The structure of the envelope of Semliki Forest virus has been reconstructed to 3.5-nm resolution. The T = 4 geometry of the surface lattice, the shape of the trimeric spikes and their arrangement on the lipid bilayer are visualized.     

A nanometre-scale electronic switch consisting of a metal cluster and redox-addressable groups

So-called bottom-up fabrication methods aim to assemble and integrate molecular components exhibiting specific functions into electronic devices that are orders of magnitude smaller than can be fabricated by lithographic techniques. Fundamental to the success of the bottom-up approach is the ability to control electron transport across molecular components. Organic molecules containing redox centres-chemical species whose oxidation number, and hence electronic structure, can be changed reversibly-support resonant tunnelling and display promising functional behaviour when sandwiched as molecular layers between electrical contacts, but their integration into more complex assemblies remains challenging. For this reason, functionalized metal nanoparticles have attracted much interest: they exhibit single-electron characteristics (such as quantized capacitance charging) and can be organized through simple self-assembly methods into well ordered structures, with the nanoparticles at controlled locations. Here we report scanning tunnelling microscopy measurements showing that organic molecules containing redox centres can be used to attach metal nanoparticles to electrode surfaces and so control the electron transport between them. Our system consists of gold nanoclusters a few nanometres across and functionalized with polymethylene chains that carry a central, reversibly reducible bipyridinium moiety. We expect that the ability to electronically contact metal nanoparticles via redox-active molecules, and to alter profoundly their tunnelling properties by charge injection into these molecules, can form the basis for a range of nanoscale electronic switches.     

Three-dimensional atomic imaging of crystalline nanoparticles

Determining the three-dimensional (3D) arrangement of atoms in crystalline nanoparticles is important for nanometre-scale device engineering and also for applications involving nanoparticles, such as optoelectronics or catalysis. A nanoparticle's physical and chemical properties are controlled by its exact 3D morphology, structure and composition. Electron tomography enables the recovery of the shape of a nanoparticle from a series of projection images. Although atomic-resolution electron microscopy has been feasible for nearly four decades, neither electron tomography nor any other experimental technique has yet demonstrated atomic resolution in three dimensions. Here we report the 3D reconstruction of a complex crystalline nanoparticle at atomic resolution. To achieve this, we combined aberration-corrected scanning transmission electron microscopy, statistical parameter estimation theory and discrete tomography. Unlike conventional electron tomography, only two images of the target--a silver nanoparticle embedded in an aluminium matrix--are sufficient for the reconstruction when combined with available knowledge about the particle's crystallographic structure. Additional projections confirm the reliability of the result. The results we present help close the gap between the atomic resolution achievable in two-dimensional electron micrographs and the coarser resolution that has hitherto been obtained by conventional electron tomography.     

Three-dimensional chromatin distribution in neuroblastoma nuclei shown by confocal scanning laser microscopy

The relationship between cell shape and function has long been of interest. However, although the behaviour of the cytoskeleton during the cell cycle has been studied extensively variations in the shape and three-dimensional substructure of the nucleus are less well documented. The spatial distribution of chromatin has previously been studied by a mathematical analysis of the optical densities of stained nuclei, allowing an indirect derivation of the three-dimensional distribution of chromatin. More direct information on chromatin organization can be obtained from electron-microscopic serial sections, although this is very laborious. Using an iterative deconvolution algorithm, Agard and Sedat achieved a degree of optical sectioning in conventional fluorescence microscopy and reconstructed the three-dimensional arrangement of polytene chromosomes. We report here on the three-dimensional structure of cultured mammalian cells as visualized by confocal scanning laser microscopy (CSLM). The exceptionally short depth of field of this imaging technique provides direct optical sectioning which, together with its higher resolution, makes CSLM extremely useful for studying the three-dimensional morphology of biological structures.     

Three-dimensional atomic-scale structure of size-selected gold nanoclusters

An unambiguous determination of the three-dimensional structure of nanoparticles is challenging. Electron tomography requires a series of images taken for many different specimen orientations. This approach is ideal for stable and stationary structures. But ultrasmall nanoparticles are intrinsically structurally unstable and may interact with the incident electron beam, constraining the electron beam density that can be used and the duration of the observation. Here we use aberration-corrected scanning transmission electron microscopy, coupled with simple imaging simulation, to determine with atomic resolution the size, three-dimensional shape, orientation and atomic arrangement of size-selected gold nanoclusters that are preformed in the gas phase and soft-landed on an amorphous carbon substrate. The structures of gold nanoclusters containing 3096 atoms can be identified with either Ino-decahedral, cuboctahedral or icosahedral geometries. Comparison with theoretical modelling of the system suggests that the structures are consistent with energetic considerations. The discovery that nanoscale gold particles function as active and selective catalysts for a variety of important chemical reactions has provoked much research interest in recent years. We believe that the detailed structure information we provide will help to unravel the role of these nanoclusters in size- and structure-specific catalytic reactions. We note that the technique will be of use in investigations of other supported ultrasmall metal cluster systems.     

以AAO模板为基底可控合成一维碳纳米材料

将不负载任何活性组分的阳极氧化铝模板分别放入两段炉中,700℃下催化裂解乙炔可控合成一维碳纳米材料,反应气氛分别为氩气和氢气;产物通过扫描电子显微镜和高分辨透射电子显微镜进行了表征.结果表明:当反应气氛为氩气时,第一段炉中模板表面为相互缠绕的蠕虫状的碳纳米管,其直径在100nm左右,模板孔内为开口的碳纳米管,其直径约为50nm左右;第二段炉中模板表面沉积了密集的碳纳米棒,其形貌规整,棒体很直,散落在模板表面,粗的直径约200nm,细的约100nm,长度短的不到1μm,长的约2.5μm;当反应气氛为氢气时,模板表面沉积了规整的直立碳纳米棒,其长度长的约1μm,短的约为100nm,粒径约为50nm.所合成的碳纳米棒为实心的断断续续的石墨片层组成的波纹状结构.     

Atom-resolved imaging of ordered defect superstructures at individual grain boundaries

The ability to resolve spatially and identify chemically atoms in defects would greatly advance our understanding of the correlation between structure and property in materials. This is particularly important in polycrystalline materials, in which the grain boundaries have profound implications for the properties and applications of the final material. However, such atomic resolution is still extremely difficult to achieve, partly because grain boundaries are effective sinks for atomic defects and impurities, which may drive structural transformation of grain boundaries and consequently modify material properties. Regardless of the origin of these sinks, the interplay between defects and grain boundaries complicates our efforts to pinpoint the exact sites and chemistries of the entities present in the defective regions, thereby limiting our understanding of how specific defects mediate property changes. Here we show that the combination of advanced electron microscopy, spectroscopy and first-principles calculations can provide three-dimensional images of complex, multicomponent grain boundaries with both atomic resolution and chemical sensitivity. The high resolution of these techniques allows us to demonstrate that even for magnesium oxide, which has a simple rock-salt structure, grain boundaries can accommodate complex ordered defect superstructures that induce significant electron trapping in the bandgap of the oxide. These results offer insights into interactions between defects and grain boundaries in ceramics and demonstrate that atomic-scale analysis of complex multicomponent structures in materials is now becoming possible.     

合肥同步辐射扫描软X射线显微镜

软Ｘ射线显微米是研究自然状态下的生物样品高分辨率成像的最好方法．本文简介了在合肥国家同步辐射实验室专用光束线上研制的国内第一台扫描软Ｘ射线显微镜和初步实验结果．